KBJ6005G - KBJ610G 6.0A GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass Passivated Die Construction · Lead Free Finish, RoHS Compliant (Note 4) KBJ High Case Dielectric Strength of 1500VRMS Dim Min Max A 24.80 25.20 P B 14.70 15.30 N C Low Reverse Leakage Current Surge Overload Rating to 170A Peak Ideal for Printed Circuit Board Applications A UL Listed Under Recognized Component Index, File Number E94661 H C B _ Mechanical Data · · Case: KBJ · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · · · Polarity: Molded on Body K D 17.20 17.80 E 0.90 1.10 G 7.30 7.70 3.10 Æ 3.40 Æ H M J E Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 L 4.00 Nominal R D Terminals: Finish ¾ Tin. Plated Leads, Solderable per MIL-STD-202, Method 208 e3 G Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 in-lbs Maximum J 3.30 3.70 K 1.50 1.90 L 9.30 9.70 M 2.50 2.90 N 3.40 3.80 P 4.40 4.80 R 0.60 0.80 All Dimensions in mm Ordering Information: See Last Page Marking: Type Number Weight: 4.6 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. KBJ Symbol 6005G Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 110°C KBJ 601G KBJ 602G KBJ 604G KBJ 606G KBJ 608G KBJ 610G Unit V VRRM VRWM VR 50 100 200 400 600 800 1000 VR(rMS) 35 70 140 280 420 560 700 V IO 6.0 A Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load IFSM 170 A Forward Voltage per element VFM 1.0 V IRM 5.0 500 µA I2 t 120 A2 s CT 80 pF RqJC 1.5 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current at Rated DC Blocking Voltage I2 t @ IF = 3.0A @ TC = 25°C @ TC = 125°C Rating for Fusing (t < 8.3ms) (Note 3) Typical Total Capacitance per Element (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink. Non-repetitive, for t > 1ms and < 8.3ms. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21207 Rev. 8 - 2 1 of 3 www.diodes.com KBJ6005G - KBJ610G ã Diodes Incorporated with heatsink 5 4 3 without heatsink 2 1 Resistive or Inductive load 0 25 50 75 10 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 6 100 125 TJ = 150°C TJ = 25°C 1.0 0.1 0.01 150 0 180 0.8 1.2 1.6 1.8 1000 f = 1MHz Single half-sine-wave 160 Tj = 25°C Tj = 150°C CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 120 80 40 100 0 1 10 100 10 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 1000 TJ = 150°C TJ = 125°C 100 TJ = 100°C 10 1.0 TJ = 25°C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS21207 Rev. 8 - 2 2 of 3 www.diodes.com KBJ6005G - KBJ610G Ordering Information Notes: (Note 5) Device Packaging Shipping KBJ6005G KBJ 20/Tube KBJ601G KBJ 20/Tube KBJ602G KBJ 20/Tube KBJ604G KBJ 20/Tube KBJ606G KBJ 20/Tube KBJ608G KBJ 20/Tube KBJ610G KBJ 20/Tube 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap2008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21207 Rev. 8 - 2 3 of 3 www.diodes.com KBJ6005G - KBJ610G