BC856A - BC858C PNP SURFACE MOUNT SMALL SIGNAL TRANSISTOR Please click here to visit our online spice models database. Features • • • • • Ideally Suited for Automatic Insertion Complementary NPN Types Available (BC846-BC848) For Switching and AF Amplifier Applications Qualified to AEC-Q101 Standards for High Reliability Lead, Halogen and Antimony Free, RoHS Compliant "Green" Device (Notes 3 and 4) B • • • • • • • C Dim Min Max A 0.37 0.51 B 1.20 1.40 C 2.30 2.50 D 0.89 1.03 E 0.45 0.60 G 1.78 2.05 H 2.80 3.00 J 0.013 0.10 K 0.903 1.10 L 0.45 0.61 M 0.085 0.180 α 0° 8° B TOP VIEW E Mechanical Data • • SOT-23 A C D E Case: SOT-23 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Pin Connections: See Diagram Marking Codes: See Table Below & Diagram on Page 4 Ordering & Date Code Information: See Page 4 Weight: 0.008 grams (approximate) G H K J M L C B E All Dimensions in mm Marking Code (Note 2) Type Marking Type Marking BC856A 3A, K3A BC857C 3G, K3G BC856B 3B, K3B BC858A 3J, K3J, K3A, K3V BC857A 3E, K3V, K3A BC858B 3K, K3K, K3B, K3W BC857B 3F, K3W, K3B BC858C 3L, K3L, K3G Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Symbol Value Unit BC856 BC857 BC858 VCBO -80 -50 -30 V BC856 BC857 BC858 VCEO -65 -45 -30 V Emitter-Base Voltage VEBO -5.0 V Collector Current IC -100 mA Peak Collector Current ICM -200 mA Peak Emitter Current IEM -200 mA Power Dissipation (Note 1) Pd 300 mW RθJA 417 °C/W Tj, TSTG -65 to +150 °C Thermal Resistance, Junction to Ambient (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Current gain subgroup “C” is not available for BC856. No purposefully added lead. Halogen and Antimony Free. Product manufactured with Data Code V9 (week 33, 2008) and newer are built with Green Molding Compound. Product manufactured prior to Date Code V9 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS11207 Rev. 19 - 2 1 of 4 BC856A-BC858C www.diodes.com © Diodes Incorporated Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage (Note 5) Collector-Emitter Breakdown Voltage (Note 5) Symbol Min Typ Max Unit BC856 BC857 BC858 V(BR)CBO -80 -50 -30 — — — — — — V IC = 10μA, IB = 0 BC856 BC857 BC858 V(BR)CEO -65 -45 -30 — — — — — — V IC = 10mA, IB = 0 V(BR)EBO -5 — — V IE = 1μA, IC = 0 hfe hfe hfe hie hie hie hoe hoe hoe hre hre hre — — — — — — — — — — — — 125 220 420 200 330 600 2.7 4.5 8.7 18 30 60 -4 1.5x10 -4 2x10 -4 3x10 180 290 520 — — — — — — — — — — — — 250 475 800 — — — kΩ kΩ kΩ µS µS µS — — — Emitter-Base Breakdown Voltage (Note 5) H-Parameters Small Signal Current Gain Input Impedance Output Admittance Reverse Voltage Transfer Ratio DC Current Gain (Note 5) Current Gain Group A B C Current Gain Group A B C Current Gain Group A B C Current Gain Group A B C Current Gain Group A B C hFE Test Condition VCE = -5.0V, IC = -2.0mA, f = 1.0kHz — VCE = -5.0V, IC = -2.0mA Collector-Emitter Saturation Voltage (Note 5) VCE(SAT) — -75 -250 -300 -650 mV IC = -10mA, IB = -0.5mA IC = -100mA, IB = -5.0mA Base-Emitter Saturation Voltage (Note 5) VBE(SAT) — — -700 -850 — mV IC = -10mA, IB = -0.5mA IC = -100mA, IB = -5.0mA Base-Emitter Voltage (Note 5) VBE(ON) -600 — -650 — -750 -820 mV VCE = -5.0V, IC = -2.0mA VCE = -5.0V, IC = -10mA ICES ICES ICES ICBO ICBO — — — — — — — — — — -15 -15 -15 -15 -4.0 nA nA nA nA µA VCE = -80V VCE = -50V VCE = -30V VCB = -30V VCB = -30V, TA = 150°C fT 100 200 — MHz VCE = -5.0V, IC = -10mA, f = 100MHz CCBO — 3 — pF VCB = -10V, f = 1.0MHz NF — 2 10 dB VCE = -5.0V, IC = 200µA, RS = 2kΩ, f = 1kHz, Δf = 200Hz Collector-Cutoff Current (Note 5) BC856 BC857 BC858 Gain Bandwidth Product Collector-Base Capacitance Noise Figure Notes: 5. Short duration pulse test used to minimize self-heating effect. DS11207 Rev. 19 - 2 2 of 4 BC856A-BC858C www.diodes.com © Diodes Incorporated 0.5 IC IB = 10 VCE(SAT), COLLECTOR TO EMITTER SATURATION VOLTAGE (V) PD, POWER DISSIPATION (mW) 350 300 250 200 150 100 0.4 0.3 TA = 25°C TA = 150°C 0.2 0.1 50 TA = -50°C 0 0.1 0 0 25 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 1, Max Power Dissipation vs Ambient Temperature 50 200 100 1000 1000 VCE = 5V ft, GAIN BANDWIDTH PRODUCT (MHz) DC CURRENT GAIN (NORMALIZED) 10 IC, COLLECTOR CURRENT (mA) Fig. 2 Collector Emitter Saturation Voltage vs. Collector Current 0.5 hFE, 1 0.4 0.3 0.2 0.1 0 100 10 0.1 1.0 10 IC, COLLECTOR CURRENT (mA) Fig. 3, DC Current Gain vs. Collector Current DS11207 Rev. 19 - 2 10 100 IC, COLLECTOR CURRENT (mA) Fig. 4, Gain Bandwidth Product vs Collector Current 1 100 3 of 4 BC856A-BC858C www.diodes.com © Diodes Incorporated Ordering Information (Note 6) Packaging SOT-23 Device* BC85xx-7-F * xx = device type, e.g. BC856A-7-F. Notes: 6. Shipping 3000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information Date Code Key Year YM XXX XXX = Product Type Marking Code (See Page 1), e.g. K3A = BC856A YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September 2005 S 2006 T 1998 1999 2000 2001 2002 2003 2004 Code J K L M N P R Month Jan Feb Mar Apr May Jun Jul Code 1 2 3 4 5 6 7 2007 U Aug 8 2008 V Sep 9 2009 W Oct O 2010 X 2011 Y Nov N 2012 Z Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS11207 Rev. 19 - 2 4 of 4 BC856A-BC858C www.diodes.com © Diodes Incorporated