DIODES B130LAW-7

SPICE MODELS: B130L
B130L
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
·
·
·
·
·
Low Forward Voltage Drop
Guard Ring Die Construction for Transient Protection
B
Ideally Suited for Automatic Assembly
SMA
Low Power Loss, High Efficiency
Lead Free Finish/RoHS Version (Note 3)
A
C
Mechanical Data
·
·
D
Case: SMA
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·
·
Moisture Sensitivity: Level 1 per J-STD-020C
·
·
·
Polarity: Cathode Band or Cathode Notch
J
H
Terminals: Lead Free Plating (Matte Tin Finish).
Solderable per MIL-STD-202, Method 208
G
E
Dim
Min
Max
A
2.29
2.92
B
4.00
4.60
C
1.27
1.63
D
0.15
0.31
E
4.80
5.59
G
0.10
0.20
H
0.76
1.52
J
2.01
2.30
All Dimensions in mm
Marking: B130L
Weight: 0.064 grams (approximate)
Maximum Ratings and Electrical Characteristics
@ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
B130L
Unit
VRRM
VRWM
VR
30
V
VR(RMS)
21
V
IO
1.0
A
IFRM
2.0
A
IFSM
25
A
@ IF = 1.0A, TJ = 25°C
@ IF = 2.0A, TJ = 25°C
@ IF = 1.0A, TJ = 100°C
@ IF = 2.0A, TJ = 100°C
VFM
0.41
0.47
0.35
0.43
V
@ VR = 15V, TA = 25°C
@ VR = 30V, TA = 25°C
@ VR = 15V, TA = 100°C
@ VR = 30V, TA = 100°C
IRM
0.4
1.0
12
25
mA
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
Blocking Voltage
@ IR = 1mA
RMS Reverse Voltage
Average Rectified Output Current
@ TT = 105°C
Peak Repetitive Forward Current
(Note 2)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
(JEDEC Method)
Forward Voltage
Peak Reverse Current
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance Junction to Terminal
Operating Temperature Range
Storage Temperature Range
Notes:
Cj
110
pF
RqJT
27
K/W
Tj
-55 to +125
°C
TSTG
-55 to +150
°C
1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2. At Rated VR, Square Wave, 25KHz, TC = 40°C.
3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
DS30151 Rev. 6 - 2
1 of 3
www.diodes.com
B130L
ã Diodes Incorporated
10
IF, INSTANTANEOUS FWD CURRENT (A)
IO, AVERAGE RECTIFIED CURRENT (A)
2.5
2.0
1.5
1.0
0.5
Tj = 125° C
0
0
25
50
75
100
125
Tj = 125° C
Tj = -40° C
1.0
Tj = 25° C
Tj = 85° C
0.1
0
150
TC, CASE TEMPERATURE (° C)
Fig. 1 Forward Current Derating Curve
0.1
0.2
0.3
0.5
0.4
0.6
0.7
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
1000
25
Single Half-Sine-Wave
(JEDEC Method)
Cj, JUNCTION CAPACITANCE (pF)
IFSM, PEAK FWD SURGE CURRENT (A)
Tj = 100° C
20
15
10
5
Tj = 25° C
100
10
1.0
0
1
10
0
100
10
15
20
25
30
35
40
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Peak Fwd Surge Current
IR, INSTANTANEOUS REVERSE CURRENT (mA)
5.0
100
Tj = 125° C
Tj = 100° C
10
Tj = 85° C
1
.1
Tj = 25° C
.01
Tj = 0° C
.001
0
10
20
30
VR, RATED PEAK REVERSE VOLTAGE (V)
Fig. 5 Typical Reverse Characteristics
DS30151 Rev. 6 - 2
2 of 3
www.diodes.com
B130L
Ordering Information
Notes:
(Note 4)
Device
Packaging
Shipping
B130L-13-F
SMA
5000/Tape & Reel
4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
IMPORTANT NOTICE
Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein;
neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such
use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the
component may directly threaten life or cause injury without the express written approval of Diodes Incorporated.
DS30151 Rev. 6 - 2
3 of 3
www.diodes.com
B130L