SPICE MODEL: SB340 SB320 - SB360 3.0A SCHOTTKY BARRIER RECTIFIER Features · · · · · · Guard Ring Die Construction for Transient Protection · · Lead Free Finish, RoHS Compliant (Note 4) Low Power Loss, High Efficiency High Surge Capability A B A High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 80A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications C D IEC 61000-4-2 (ESD - 150pF/330W) Air discharge - ±15kV Contact - ±15kV DO-201AD Mechanical Data Dim Min Max · · Case: DO-201AD A 25.40 ¾ Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 B 7.20 9.50 · · C 1.20 1.30 Moisture Sensitivity: Level 1 per J-STD-020C D 4.80 5.30 · · · Polarity: Cathode Band Terminals: Finish - Tin. Solderable per MIL-STD-202, Method 208 e3 All Dimensions in mm Marking: Type Number Weight: 1.1 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 2) RMS Reverse Voltage Symbol SB320 SB330 SB340 SB350 SB360 Unit VRRM VRWM VR 20 30 40 50 60 V VR(RMS) 14 21 28 35 42 V Average Rectified Output Current (Note 1) (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IO 3.0 A IFSM 80 A Forward Voltage @ IF = 3.0A VFM @ TA = 25°C @ TA = 100°C IRM Peak Reverse Current at Rated DC Blocking Voltage (Note 2) Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range Notes: 0.50 0.74 0.5 20 30 RqJL 10 Tj mA 10 RqJA TSTG V -65 to +125 °C/W -65 to +150 °C °C -65 to +150 1. Measured at ambient temperature at a distance of 9.5mm from the case. 2. Short duration pulse test used to minimize self-heating effect. 3. Thermal resistance from junction to lead vertical P.C.B. mounted, 0.500" (12.7mm) lead length with 2.5 x 2.5" (63.5 x 63.5mm) copper pad. 4. RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7. DS23023 Rev. 7 - 2 1 of 3 www.diodes.com SB320-SB360 ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 3.0 2.5 2.0 1.5 1.0 Resistive or Inductive Load 0.375” (9.5mm) lead length SB320 - SB340 SB350 & SB360 0.5 0 25 50 75 100 125 10 TA = +125° C TA = +25° C 1.0 SB320 - SB340 SB350 & SB360 0.1 0.1 150 0.4 0.3 0.5 0.6 0.7 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TL, LEAD TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve 1000 80 Tj = 25° C f = 1.0MHz Vsig = 50m Vp-p 8.3ms Single Half-Sine-Wave Tj = Tj(max) 64 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.2 48 32 16 100 SB320 - SB340 SB350 & SB360 10 0 1 100 10 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current IR, INSTANTANEOUS REVERSE CURRENT (mA) 1 0.1 10 Tj = 125°C 1 Tj = 75°C 0.1 0.01 Tj = 25°C 0.001 SB320 - SB340 SB350 & SB360 0.0001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE (%) Fig. 5 Typical Reverse Characteristics DS23023 Rev. 7 - 2 2 of 3 www.diodes.com SB320-SB360 Ordering Information Notes: (Note 5) Device Packaging Shipping SB320-B DO-201AD 500/Bulk SB330-B DO-201AD 500/Bulk SB340-B DO-201AD 500/Bulk SB350-B DO-201AD 500/Bulk SB360-B DO-201AD 500/Bulk 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS23023 Rev. 7 - 2 3 of 3 www.diodes.com SB320-SB360