SBL3045CT - Diodes Incorporated

SBL3045CT
30A SCHOTTKY BARRIER RECTIFIER
FOR NEW
MENDED
PART
OBSOLETE
- DESIGNS
NOT RECOM
5CT
USE MBR304
USE MBR3045CT
Features
·
Guard Ring Die Construction for
Transient Protection
·
·
·
·
Low Power Loss, High Efficiency
L
High Surge Capability
B
High Current Capability and Low Forward Voltage Drop
For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
C
D
Lead Free Finish, RoHS Compliant (Note 3)
K
A
Mechanical Data
·
·
·
·
·
1
Case: TO-220AB
G
J
Moisture Sensitivity: Level 1 per J-STD-020C
Polarity: As Marked on Body
3
E
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
Terminals: Finish – Bright Tin. Solderable per
MIL-STD-202, Method 208
2
N
LE
·
·
M
H H
P
Pin 1
Pin 2
Pin 3
Marking: Type Number
Weight: 2.24 grams (approx.)
Maximum Ratings and Electrical Characteristics
Min
Max
A
14.48
15.75
B
10.00
10.40
C
2.54
3.43
D
5.90
6.40
E
2.80
3.93
G
12.70
14.27
H
2.40
2.70
J
0.69
0.93
K
3.54
3.78
TE
·
TO-220AB
Dim
Case
L
4.07
4.82
M
1.15
1.39
N
0.30
0.50
P
2.04
2.79
All Dimensions in mm
@ TA = 25°C unless otherwise specified
BS
O
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Symbol
Value
Unit
VRRM
VRWM
VR
45
V
VR(RMS)
32
V
Average Rectified Output Current
(Note 1)
@ TC = 100°C
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
IO
30
A
IFSM
250
A
Forward Voltage Drop
@ IF = 15A, TC = 25°C
VFM
0.55
V
@ TC = 25°C
@ TC = 100°C
IRM
1.0
75
mA
O
Peak Reverse Current
at Rated DC Blocking Voltage
Typical Total Capacitance (Note 2)
Typical Thermal Resistance Junction to Case (Note 1)
Operating Temperature Range
Storage Temperature Range
Notes:
450
pF
1.5
°C/W
Tj
-55 to +125
°C
TSTG
-55 to +150
°C
1. Thermal resistance junction to case mounted on heatsink.
2. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC.
3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Ordering Information
Notes:
CT
RqJC
(Note 4)
Device
Packaging
Shipping
SBL3045CT
TO-220AB
50/Tube
4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
DS30609 Rev. 2 - 4
1 of 3
www.diodes.com
SBL3045CT
ã Diodes Incorporated
NOT RECOMMENDED FOR NEW DESIGNS
USE MBR3045CT
IF, INSTANTANEOUS FORWARD CURRENT (A)
30
20
10
0
0
50
25
100
75
125
Tj = 25° C
10
1.0
Pulse Width = 300us
2% Duty Cycle
0.1
0.1
150
TC, CASE TEMPERATURE (° C)
Fig. 1 Forward Current Derating Curve
0.3
0.5
0.7
0.9
1.1
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
300
100
IFSM, PEAK FORWARD CURRENT (A)
8.3 ms single half-sine-wave
250
LE
10
Tj = 100°C
1.0
0.1
Tj = 25°C
BS
O
IR, INSTANTANEOUS REVERSE CURRENT (mA)
100
TE
I(AV), AVERAGE FORWARD CURRENT (A)
40
0.01
200
150
100
50
0.001
0
20
60
40
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 3 Typical Reverse Characteristics
0
1
10
100
NUMBER OF CYCLES AT 60Hz
Fig. 4 Maximum Non-Repetitive Forward Surge Current
CT, TOTAL CAPACITANCE (pF)
O
1000
100
Tj = 25° C
f = 1MHz
10
0.1
1
10
100
VR, REVERSE VOLTAGE (V)
Fig. 5 Typical Total Capacitance
DS30609 Rev. 1 - 3
2 of 3
www.diodes.com
SBL3045CT
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
O
BS
O
LE
TE
NOT RECOMMENDED FOR NEW DESIGNS
USE MBR3045CT
DS30609 Rev. 1 - 3
3 of 3
www.diodes.com
SBL3045CT