ZPY1 - ZPY100 SILICON PLANAR POWER ZENER DIODE Features · · · · 1.3 W Power Dissipation Reliable Glass Package Planar Die Construction 0.7V - 100V Nominal Zener Voltages Plus ZPY1 Stabistor B A Mechanical Data · · · · · A C D Case: Glass, DO-41 Leads: Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.35 grams (approx.) DO-41 Dim Min Max A 25.4 — B 4.1 5.2 C 0.71 0.86 D 2.0 2.7 All Dimensions in mm Maximum Ratings 25°C unless otherwise specified Symbol Value Unit Zener Current (see Table on Page 2) Characteristic — — — Power Dissipation (Note 1) Pd 1.3 W RqJA 135 K/W Tj, TSTG -55 to +200 °C Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage Temperature Range Note: 1. Valid provided that leads are kept at ambient temperature at a distance of 10mm from case. DS21404 Rev. D-3 1 of 3 ZPY1-ZPY100 Electrical Characteristics Type Number 25°C unless otherwise specified Zener Voltage Range (Note 2) Test Current Maximum Zener Impedance Typical Temperature Coefficient Minimum Reverse Voltage @ IR = 0.5µA Maximum Zener Current (Note 1) VZ @ IZT IZT ZZT @ IZT @ TC VR IZM Volts mA Ohms %/°C Volts mA ZPY1 (Note 3) 0.65-0.75 5.0 8 -0.24 — 580 ZPY3.9 3.7-4.1 100 7 -0.025 — 290 ZPY4.3 4.0-4.6 100 7 -0.020 — 260 ZPY4.7 4.4-5.0 100 7 -0.015 — 235 ZPY5.1 4.8-5.4 100 5 -0.005 0.7 215 ZPY5.6 5.2-6.0 100 2 +0.010 1.5 193 ZPY6.2 5.8-6.6 100 2 +0.025 2 183 ZPY6.8 6.4-7.2 100 2 +0.035 3 157 ZPY7.5 7.0-7.9 100 2 +0.035 5 143 ZPY8.2 7.7-8.7 100 2 +0.055 6 127 ZPY9.1 8.5-9.6 50 4 +0.055 7 117 ZPY10 9.4-10.6 50 4 +0.070 7.5 105 ZPY11 10.4-11.6 50 7 +0.075 8.5 94 ZPY12 11.4-12.7 50 7 +0.075 9.0 85 ZPY13 12.4-14.1 50 9 +0.075 10 78 ZPY15 13.8-15.8 50 9 +0.075 11 70 ZPY16 15.3-17.1 25 10 +0.090 12 63 ZPY18 16.8-19.1 25 11 +0.090 14 57 ZPY20 18.8-21.2 25 12 +0.090 15 52 ZPY22 20.8-23.3 25 13 +0.090 17 48 ZPY24 22.8-25.6 25 14 +0.095 18 42 ZPY27 25.1-28.9 25 15 +0.095 20 38 ZPY30 28-32 25 20 +0.095 22.5 35 ZPY33 31-35 25 20 +0.095 25 31 ZPY36 34-38 10 60 +0.095 27 29 ZPY39 37-41 10 60 +0.100 29 26 ZPY43 40-46 10 80 +0.105 32 24 ZPY47 44-50 10 80 +0.105 35 22 ZPY51 48-54 10 100 +0.105 38 20 ZPY56 52-60 10 100 +0.105 42 18 ZPY62 58-66 10 130 +0.105 47 16 ZPY68 64-72 10 130 +0.105 51 14 ZPY75 70-79 10 160 +0.105 56 13 ZPY82 77-88 10 160 +0.105 61 12 ZPY91 85-96 5.0 250 +0.110 68 11 ZPY100 94-106 5.0 250 +0.110 75 10 Notes: 1. Valid provided that leads are kept at ambient temperature at a distance of 10mm from case. 2. Tested with pulses tp = 20ma. 3. The ZPY1 is a silicon diode operated in forward direction. Hence, the index of all parameters and maximum ratings should be “F” instead of “Z.” Connect the cathode terminal to the negative pole. DS21404 Rev. D-3 2 of 3 ZPY1-ZPY100 60 240 ZPY1 ZPY3,9 ZPY4,7 160 120 IZT, ZENER CURRENT (mA) IZT, ZENER CURRENT (mA) ZPY5,6 ZPY6,8 ZPY8,2 Test Current IZ 100mA ZPY10 ZPY12 80 50mA 40 0 0 2 4 6 8 10 12 ZPY33 30 Test Current IZ 25mA ZPY39 ZPY47 20 0 14 10mA Pd, POWER DISSIPATION (W) ZPY100 5mA 30 40 50 See Note 1 1 0 0 20 See Note 2 ZPY82 10 10 2 ZPY68 Test Current IZ 10mA 0 VZ, ZENER VOLTAGE (V) Fig. 2, Zener Breakdown Characteristics Tj = 25°C ZPY56 IZ, ZENER CURRENT (mA) See Note 2 10 20 50 100 VZ, ZENER VOLTAGE (V) Fig. 3, Zener Breakdown Characteristics Notes: Tj = 25°C ZPY27 40 VZ, ZENER VOLTAGE (V) Fig. 1, Zener Breakdown Characteristics 0 ZPY18 ZPY22 50 See Note 2 200 ZPY15 Tj = 25°C 0 100 200 TA, AMBIENT TEMPERATURE (°C) Fig. 4, Power Derating Curve 1. Valid provided that leads are kept at ambient temperature at a distance of 10mm from case. 2. Tested with pulses tp = 20ma. 3. The ZPY1 is a silicon diode operated in forward direction. Hence, the index of all parameters and maximum ratings should be “F” instead of “Z.” Connect the cathode terminal to the negative pole. DS21404 Rev. D-3 3 of 3 ZPY1-ZPY100