DCX (LO-R1) U COMPLEMENTARY NPN/PNP PRE-BIASED SMALL SIGNAL SOT-363 DUAL SURFACE MOUNT TRANSISTOR NEW PRODUCT Features · · · Epitaxial Planar Die Construction SOT-363 A Built-In Biasing Resistors Lead Free/RoHS Compliant (Note 3) CXX YM Mechanical Data · · Case: SOT-363 · · Moisture Sensitivity: Level 1 per J-STD-020C Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Max 0.10 0.30 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal G H K Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). · · · · · Min A B C M Terminals: Finish - Matte Tin Solderable per MIL-STD-202, Method 208 · Dim J D F L Terminal Connections: See Diagram Marking: Date Code and Type Code, See Page 3 Type Code: See Table Below F 0.30 0.40 H 1.80 2.20 J ¾ 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.25 a 0° 8° All Dimensions in mm Ordering Information (See Page 3) Weight: 0.006 grams (approx.) P/N DCX122LU DCX142JU DCX122TU DCX142TU R1 R 2 R1 (NOM) R2 (NOM) Type Code 0.22K 0.47K 0.22K 0.47K 10K 10K OPEN OPEN C81 C82 C83 C84 R1 R2 R1 R1 R1, R2 R1 Only SCHEMATIC DIAGRAM Maximum Ratings NPN Section @ TA = 25°C unless otherwise specified Characteristic Supply Voltage Symbol Value Unit VCC 50 V V V Input Voltage DCX122LU DCX142JU VIN -5 to +6 -5 to +6 Input Voltage DCX122TU DCX142TU VEBO (MAX) 5 IC 100 mA Pd 200 mW RqJA 625 °C/W Tj, TSTG -55 to +150 °C Output Current Power Dissipation (Note 1, 2) Thermal Resistance, Junction to Ambient Air (Note 2) Operating and Storage and Temperature Range Note: All 1. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 2. 150mW per element must not be exceeded. 3. No purposefully added lead. DS30425 Rev. 3 - 2 1 of 4 www.diodes.com DCX (LO-R1) U ã Diodes Incorporated NEW PRODUCT Maximum Ratings PNP Section @ TA = 25°C unless otherwise specified Characteristic Supply Voltage Symbol Value Unit VCC -50 V V V Input Voltage DCX122LU DCX142JU VIN +5 to -6 +5 to -6 Input Voltage DCX122TU DCX142TU VEBO (MAX) -5 Output Current IC -100 mA Pd 200 mW RqJA 625 °C/W Tj, TSTG -55 to +150 °C All Power Dissipation (Note 1,2) Thermal Resistance, Junction to Ambient Air (Note 1,2) Operating and Storage and Temperature Range Note: 1. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 2. 150mW per element must not be exceeded. Electrical Characteristics NPN Section Characteristic Input Voltage @ TA = 25°C unless otherwise specified Symbol Min Typ Max Unit DCX122LU DCX142JU Vl(off) 0.3 0.3 ¾ ¾ V VCC = 5V, IO = 100mA DCX122LU DCX142JU Vl(on) ¾ ¾ 2.0 2.0 V VO = 0.3V, IO = 20mA VO = 0.3V, IO = 20mA VO(on) ¾ ¾ 0.3V V IO/Il = 5mA/0.25mA Il ¾ ¾ 28 13 mA VI = 5V IO(off) ¾ ¾ 0.5 mA VCC = 50V, VI = 0V Gl 56 56 ¾ ¾ ¾ VO = 5V, IO = 10mA fT ¾ 200 ¾ MHz Output Voltage DCX122LU DCX142JU Input Current Output Current DCX122LU DCX142JU DC Current Gain R1, R2 Types Gain-Bandwidth Product* Test Condition VCE = 10V, IE = 5mA, f = 100MHz * Transistor - For Reference Only Electrical Characteristics NPN Section Characteristic @ TA = 25°C unless otherwise specified R1 Only Symbol Min Typ Max Unit Collector-Base Breakdown Voltage BVCBO 50 ¾ ¾ V Collector-Emitter Breakdown Voltage BVCEO 40 ¾ ¾ V IC = 1mA Emitter-Base Breakdown Voltage DCX122TU DCX142TU Collector Cutoff Current Emitter Cutoff Current DCX122TU DCX142TU Collector-Emitter Saturation Voltage DC Current Transfer Ratio Gain-Bandwidth Product* DCX122TU DCX142TU Test Condition IC = 50mA BVEBO 5 ¾ ¾ V IE = 50mA IE = 50mA ICBO ¾ ¾ 0.5 mA VCB = 50V IEBO ¾ ¾ ¾ 0.5 0.5 mA VEB = 4V VCE(sat) ¾ ¾ 0.3 V IC = 5mA, IB = 0.25mA hFE 100 100 250 250 600 600 ¾ IC = 1mA, VCE = 5V fT ¾ 200 ¾ MHz VCE = 10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only DS30425 Rev. 3 - 2 2 of 4 www.diodes.com DCX (LO-R1) U NEW PRODUCT Electrical Characteristics PNP Section @ TA = 25°C unless otherwise specified Characteristic Input Voltage Symbol Min Typ Max Unit DCX122LU DCX142JU Vl(off) -0.3 -0.3 ¾ ¾ V VCC = -5V, IO = -100mA DCX122LU DCX142JU Vl(on) ¾ ¾ -2.0 -2.0 V VO = -0.3V, IO = -20mA VO = -0.3V, IO = -20mA VO(on) ¾ ¾ -0.3V V IO/Il = -5mA/-0.25mA mA VI = -5V Output Voltage DCX122LU DCX142JU Input Current Output Current Test Condition Il ¾ ¾ -28 -13 IO(off) ¾ ¾ -0.5 mA VCC = -50V, VI = 0V Gl 56 56 ¾ ¾ ¾ VO = -5V, IO = -10mA fT ¾ 200 ¾ MHz DCX122LU DCX142JU DC Current Gain R1, R2 Types Gain-Bandwidth Product* VCE = -10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only Electrical Characteristics PNP Section Characteristic R1-Only Types @ TA = 25°C unless otherwise specified Symbol Min Typ Max Unit Collector-Base Breakdown Voltage BVCBO -50 ¾ ¾ V Collector-Emitter Breakdown Voltage BVCEO -40 ¾ ¾ V IC = -1mA Emitter-Base Breakdown Voltage DCX122TU DCX142TU BVEBO -5 ¾ ¾ V ICBO ¾ ¾ -0.5 mA VCB = -50V IEBO ¾ ¾ ¾ -0.5 -0.5 mA VEB = -4V DCX122TU DCX142TU Collector-Emitter Saturation Voltage VCE(sat) ¾ ¾ -0.3 V IC = -5mA, IB = -0.25mA hFE 100 100 250 250 600 600 ¾ IC = -1mA, VCE = -5V fT ¾ 200 ¾ MHz VCE = -10V, IE = 5mA, f = 100MHz DCX122TU DCX142TU DC Current Transfer Ratio IC = -50mA IE = -50mA IE = -50mA Collector Cutoff Current Emitter Cutoff Current Test Condition Gain-Bandwidth Product* * Transistor - For Reference Only Ordering Information (Note 4) Device Packaging Shipping DCX122LU-7-F SOT-363 3000/Tape & Reel DCX142JU-7-F SOT-363 3000/Tape & Reel DCX122TU-7-F SOT-363 3000/Tape & Reel DCX142TU-7-F SOT-363 3000/Tape & Reel Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information CXX = Product Type Marking Code, See Table on Page 1 YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September CXX YM Date Code Key Year 2002 2003 2004 2005 2006 2007 2008 2009 Code N P R S T U V W Month Jan Feb March Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D DS30425 Rev. 3 - 2 3 of 4 www.diodes.com DCX (LO-R1) U Pd, POWER DISSIPATION (mW) NEW PRODUCT 250 200 150 100 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (° C) Fig. 1 Power Derating Curve (150mW per element must not be exceeded). IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. DS30425 Rev. 3 - 2 4 of 4 www.diodes.com DCX (LO-R1) U