ES2G 2.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features · · · · · Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Surge Overload Rating to 50A Peak SMB B Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 4) A C Mechanical Data · · · · · · · · Case: SMB D Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 J Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 e3 G E H Dim Min Max A 3.30 3.94 B 4.06 4.57 C 1.96 2.21 D 0.15 0.31 E 5.00 5.59 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Polarity: Cathode Band or Cathode Notch Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.093 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 400 V VR(RMS) 280 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IFSM 50 A Forward Voltage VFM 1.25 V IRM 5.0 350 mA trr 35 ns Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage (Note 5) @ TT = 110°C @ IF = 2.0A @ TA = 25°C @ TA = 125°C Reverse Recovery Time (Note 3) Typical Capacitance (Note 2) Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. CT 25 pF RqJT 20 °C/W Tj, TSTG -55 to +150 °C Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect DS30212 Rev. 6 - 2 1 of 3 www.diodes.com ES2G ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 0.75 2.0 1.6 1.2 0.8 0.4 0 25 50 75 100 125 150 175 10 1.0 0.1 0.01 0 IFSM, PEAK FORWARD SURGE CURRENT (A) TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 60 1000 Single Half-Sine-Wave 50 Tj = 125°C 100 40 30 10 20 Tj = 25°C 1.0 10 0 0.1 1 10 100 0 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 400 320 160 240 80 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30212 Rev. 6 - 2 2 of 3 www.diodes.com ES2G Ordering Information Notes: 6. (Note 6) Device Packaging Shipping ES2G-13-F SMB 5000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW ES2G ES2G = Product type marking code = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30212 Rev. 6 - 2 3 of 3 www.diodes.com ES2G