RS601 - RS607 6.0A BRIDGE RECTIFIER Features · · · · · · UL Recognized, File #94661 Ideal for Printed Circuit Board Surge Overload Rating of 250A Peak Low Forward Voltage Drop Easily Cleaned with Freon, Alcohol, Chlorothene and Similar Solvents The Plastic Material Carries UL Recognition 94V-0 RS-6 Dim A C B D L K - Mechanical Data · · · · · M ~ ~ + E N Case: RS-6, Molded Plastic Terminals: Leads Solderable per MIL-STD-202, Method 208 Polarity: Symbols Marked on Body Approx. Weight: 8.0 grams Mounting Position: Any J G H Maximum Ratings and Electrical Characteristics P Min Max A 22.7 23.7 B 3.6 4.1 C 4.2 4.7 D 1.7 2.2 E 10.3 11.3 G 4.5 6.8 H 4.6 5.6 J 25.4 - K - 19.3 17.8 L 16.8 M 6.6 7.1 N 4.7 5.2 P 1.2 1.3 All Dimensions in mm @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol RS 601 RS 602 RS 603 RS 604 RS 605 RS 606 RS 607 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRSM 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current I(AV) 6.0 A IFSM 250 A VF 1.0 V IR 10 1.0 mA mA RqJC 4.7 °C/W TJ -55 to +125 °C TSTG -55 to +150 °C Characteristic @ TC = 100°C @ TA = 40°C Peak Forward Surge current, 8.3 ms half sine-wave superimposed on rated load Maximum DC Forward Voltage Drop per element at 3.0A Maximum DC Reverse Current at Rated DC Blocking Voltage, per element @ TA = 25°C @ TA = 100°C Maximum Thermal Resistance (Note 1) Operating Temperature Range Storage Temperature Range Notes: 1. Thermal Resistance junction to case per diode DS21314 Rev. E-3 1 of 2 RS601-RS607 CASE TEMP. 4 AMBIENT TEMP. 3 2 1 Single Phase Half Wave 60 Hz Resistive or Inductive Load INSTANTANEOUS FORWARD CURRENT (AMPERES) AVERAGE OUTPUT CURRENT (AMPERES) 5 0 60 80 100 120 140 TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 20 40 10 PEAK FORWARD CURRENT (AMPERES) INSTANTANEOUS REVERSE CURRENT (mA) 100 6 TC = 100ºC 1.0 0.1 TA = 25ºC 10 1.0 TJ = 25ºC Pulse Width = 300 ms 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Fig. 2 Typical Forward Characteristics 250 200 150 100 50 8.3ms Single Half Sine-Wave JEDEC Method 0 0.01 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 Max Non-Repetitive Peak Fwd Surge Current 0 20 40 60 80 100 120 140 RATED PERCENT OF PEAK REVERSE VOLTAGE Fig. 3 Typical Reverse Characteristics 1 CAPACITANCE (pF) 400 100 TJ = 25ºC f = 1MHz 10 DS21314 Rev. E-3 1 10 100 REVERSE VOLTAGE (VOLTS) Fig. 5 Typical Junction Capacitance Per Element 2 of 2 RS601-RS607