BA980 Vishay Semiconductors RF PIN Diode - Single in QuadroMELF SOD-80 Features • Wide frequency range 10 MHz to 1 GHz • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Applications 9612009 • Current controlled HF resistance in adjustable attenuators Mechanical Data Case: QuadroMELF SOD-80 Weight: approx. 34 mg Cathode Band Color: Black Packaging Codes/Options: GS18/10 k per 13" reel (8 mm tape), 10 k/box GS08/2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part BA980 Ordering code Type Marking Remarks BA980-GS18 or BA980-GS08 - Tape and Reel (2.500 pcs) Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Symbol Value Unit Reverse voltage Parameter Test condition VR 30 V Forward continuous current IF 50 mA Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit Thermal resistance junction to ambient air on PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W Tj 125 °C Tstg - 55 to + 150 °C Junction temperature Storage temperature range Electrical Characteristics Tamb = 25 °C, unless otherwise specified Test condition Symbol Forward voltage Parameter IF = 20 mA VF Reverse current VR = 30 V Diode capacitance Differential forward resistance Reverse impedance Minority carrier lifetime Document Number 85636 Rev. 1.4, 05-Aug-10 Min Typ. Max Unit 1000 mV IR 50 nA f = 100 MHz, VR = 0 CD 0.5 pF f = 100 MHz, IF = 1.5 mA rf 40 60 Ω f = 100 MHz, VR = 0 zr 5 IF = 10 mA, IR = 10 mA τ kΩ 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] µs www.vishay.com 1 BA980 Vishay Semiconductors Typical Characteristics Tamb = 25 °C, unless otherwise specified IF - Forward Current (mA) 100 10 Tamb = 25 °C 1 Scattering Limit 0.1 0.01 0 95 9735 0.4 0.8 1.2 1.6 2.0 VF - Forward Voltage (V) Figure 1. Forward Current vs. Forward Voltage Package Dimensions in millimeters (inches): QuadroMELF SOD-80 1. 1.6 (0.063) s 1.4 (0.055) gl 7 as (0 .0 67 ) Cathode identification > R3 (R0.118) glass 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 2.5 (0.098) max. 2 (0.079) min. 1.25 (0.049) min. 5 (0.197) ref. 96 12071 www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85636 [email protected], [email protected], [email protected] Rev. 1.4, 05-Aug-10 QuadroMELF SOD80 Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches) 1.6 (0.063) 1.4 (0.055) 1. 7 (0 .0 gl as 67) s Cathode identification > R3 (R0.118) glass 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 2.5 (0.098) max. 2 (0.079) min. 1.25 (0.049) min. 5 (0.197) ref. 96 12071 Document Number: 84025 Rev. 1.2, 12-Jan-07 For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1