NCS2200 Series, NCS2200A Low Voltage Comparators The NCS2200 Series is an industry first sub−one volt, low power comparator family. These devices consume only 10 mA of supply current. They are guaranteed to operate at a low voltage of 0.85 V which allows them to be used in systems that require less than 1.0 V and are fully operational up to 6.0 V which makes them convenient for use in both 3.0 V and 5.0 V systems. Additional features include no output phase inversion with overdriven inputs, internal hysteresis, which allows for clean output switching, and rail−to−rail input and output performance. The NCS2200 Series is available in the tiny SOT−23−5 package. There are four options featuring two industry standard pinouts. Additionally, the NCS2200 and NCS2202 are available in the SC70−5 package. The NCS2200 is also available in the tiny DFN 2x2.2 package. The NCS2200A is available in UDFN 1.2x1.0 package. (Table 1) Features • • • • • • • • • 5 1 Operating Voltage of 0.85 V to 6.0 V Rail−to−Rail Input/Output Performance Low Supply Current of 10 mA No Phase Inversion with Overdriven Input Signals Glitchless Transitioning in or out of Tri−State Mode Complementary or Open Drain Output Configuration Internal Hysteresis Propagation Delay of 1.1 ms Pb−Free Packages are Available SOT−23−5 (TSOP−5) SN SUFFIX CASE 483 DFN 2x2.2 SQL SUFFIX CASE 488 1 6 5 1 Typical Applications • • • • http://onsemi.com 1 Single Cell NiCd/NiMH Battery Powered Applications Cellular Telephones Alarm and Security Systems Personal Digital Assistants SC70−5 SQ SUFFIX CASE 419A UDFN 1.2x1.0 MU SUFFIX CASE 517AA ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 12 of this data sheet. DEVICE MARKING INFORMATION See general marking information in the device marking section on page 13 of this data sheet. © Semiconductor Components Industries, LLC, 2010 August, 2010 − Rev. 10 1 Publication Order Number: NCS2200/D NCS2200 Series, NCS2200A Table 1. Comparator Selector Guide Output Type Device Package Pinout Style NCS2200SN1T1 SOT−23−5 1 Complementary NCS2200SN2T1 SOT−23−5 2 Complementary NCS2200SQ2T2 SC70−5 2 Open Drain NCS2202SN1T1 SOT−23−5 1 Open Drain NCS2202SQ1T2 SC70−5 1 Open Drain NCS2202SN2T1 SOT−23−5 2 Open Drain NCS2202SQ2T2 SC70−5 2 Complementary Complementary NCS2200SQLT1 DFN, 2x2.2 N/A Complementary NCS2200AMUT1 UDFN, 1.2x1.0 N/A PIN CONNECTIONS Output 1 VCC Non−Inverting Input 2 3 5 VEE 4 Inverting Input + - Output 1 VEE Non−Inverting Input 2 3 5 VCC 4 Inverting Input + - Style 2 Pinout (SN2T1, SQ2T2) Style 1 Pinout (SN1T1) Figure 1. SOT−23−5 (NCS2200, NCS2202), SC70−5 (NCS2200, NCS2202) VEE 1 6 VOUT VCC 2 5 VCC IN− 3 4 IN+ Top View Figure 2. DFN 2x2.2 (NCS2200) UDFN 1.2x1.0 (NCS2200A) http://onsemi.com 2 NCS2200 Series, NCS2200A MAXIMUM RATINGS Symbol Value Unit Supply Voltage Range (VCC to VEE) Rating VS 6.0 V Non−inverting/Inverting Input to VEE − −0.2 to (VCC + 0.2) V Operating Junction Temperature TJ 150 °C Operating Ambient Temperature TA −40 to +105 °C Storage Temperature Range Tstg −65 to +150 °C Output Short Circuit Duration Time (Note 1) tS Indefinite ESD Tolerance (Note 2) NCS2200 Human Body Model Machine Model NCS2202 Human Body Model Machine Model NCS2200A Human Body Model Machine Model − s V 2000 200 1000 200 1900 200 Thermal Resistance, Junction−to−Ambient TSOP−5 DFN (Note 3) SC70−5 UDFN RqJA 238 215 283 350 °C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The maximum package power dissipation limit must not be exceeded. TJ(max) * TA PD + RqJA 2. ESD data available upon request. 3. For more information, refer to application note, AND8080/D. http://onsemi.com 3 NCS2200 Series, NCS2200A ELECTRICAL CHARACTERISTICS (For all values VCC = 0.85 V to 6.0 V, VEE = 0 V, TA = 25°C, unless otherwise noted.) (Note 4) NCS2200 Series Characteristics Symbol Min Typ Max Unit VHYS 2.0 8.0 20 mV Input Hysteresis TA = 25°C Input Offset Voltage VCC = 0.85 V TA = 25°C TA = −40°C to 105°C VCC = 3.0 V TA = 25°C TA = −40°C to 105°C VCC = 6.0 V TA = 25°C TA = −40°C to 105°C VIO mV −10 −12 0.5 − +10 +12 −6.0 −8.0 0.5 − +6.0 +8.0 −5.0 −7.0 0.5 − +5.0 +7.0 Common Mode Voltage Range VCM − VEE to VCC − V Output Leakage Current (NCS2202) VCC = 6.0 V ILEAK − 3.3 − nA ISC − 70 − mA CMRR 53 65 − dB IIB − 1.0 − pA PSRR 45 55 − dB Output Short−Circuit Sourcing or Sinking (Vout = GND) Common Mode Rejection Ratio VCM = VCC Input Bias Current Power Supply Rejection Ratio DVS = 2.575 V Supply Current VCC = 0.85 V TA = 25°C TA = −40°C to 105°C VCC = 3.0 V TA = 25°C TA = −40°C to 105°C VCC = 6.0 V TA = 25°C TA = −40°C to 105°C ICC Output Voltage High (NCS2200) VCC = 0.85 V, Isource = 0.5 mA TA = 25°C TA = −40°C to 105°C VCC = 3.0 V, Isource = 3.0 mA TA = 25°C TA = −40°C to 105°C VCC = 6.0 V, Isource = 5.0 mA TA = 25°C TA = −40°C to 105°C VOH Output Voltage Low VCC = 0.85 V, Isink = 0.5 mA TA = 25°C TA = −40°C to 105°C VCC = 3.0 V, Isink = 3.0 mA TA = 25°C TA = −40°C to 105°C VCC = 6.0 V, Isink = 5.0 mA TA = 25°C TA = −40°C to 105°C VOL mA − 10 − 15 17 − 10 − 15 17 − 10 − 15 17 V VCC − 0.2 VCC − 0.225 VCC − 0.10 − − VCC − 0.2 VCC − 0.25 VCC − 0.12 − − VCC − 0.2 VCC − 0.25 VCC − 0.12 − − V − VEE + 0.10 − VEE + 0.2 VEE + 0.225 − VEE + 0.12 − VEE + 0.2 VEE + 0.25 − VEE + 0.12 − VEE + 0.2 VEE + 0.25 tPHL tPLH − − 0.7 1.1 − − Output Fall Time VCC = 6.0 V, CL = 50 pF tFALL − 20 − ns Output Rise Time VCC = 6.0 V, CL = 50 pF tRISE − 16 − ns tPU − 35 − ms Propagation Delay 20 mV Overdrive, CL = 15 pF Powerup Time 4. The limits over the extended temperature range are guaranteed by design only. http://onsemi.com 4 ms NCS2200 Series, NCS2200A ELECTRICAL CHARACTERISTICS (For all values VCC = 0.85 V to 6.0 V, VEE = 0 V, TA = 25°C, unless otherwise noted.) (Note 5) NCS2200A Characteristics Symbol Min Typ Max Unit VHYS 2.0 4.5 20 mV Input Hysteresis TA = 25°C Input Offset Voltage VCC = 0.85 V TA = 25°C TA = −40°C to 105°C VCC = 3.0 V TA = 25°C TA = −40°C to 105°C VCC = 6.0 V TA = 25°C TA = −40°C to 105°C VIO Common Mode Voltage Range Output Short−Circuit Sourcing or Sinking (Vout = GND) Common Mode Rejection Ratio VCM = VCC Input Bias Current Power Supply Rejection Ratio DVS = 2.575 V mV −10 −12 0.5 − +10 +12 −6.0 −8.0 0.5 − +6.0 +8.0 −5.0 −7.0 0.5 − +5.0 +7.0 VCM − VEE to VCC − V ISC − 60 − mA CMRR 53 70 − dB IIB − 1.0 − pA PSRR 45 80 − dB Supply Current VCC = 0.85 V TA = 25°C TA = −40°C to 105°C VCC = 3.0 V TA = 25°C TA = −40°C to 105°C VCC = 6.0 V TA = 25°C TA = −40°C to 105°C ICC Output Voltage High VCC = 0.85 V, Isource = 0.5 mA TA = 25°C TA = −40°C to 105°C VCC = 3.0 V, Isource = 3.0 mA TA = 25°C TA = −40°C to 105°C VCC = 6.0 V, Isource = 5.0 mA TA = 25°C TA = −40°C to 105°C VOH Output Voltage Low VCC = 0.85 V, Isink = 0.5 mA TA = 25°C TA = −40°C to 105°C VCC = 3.0 V, Isink = 3.0 mA TA = 25°C TA = −40°C to 105°C VCC = 6.0 V, Isink = 5.0 mA TA = 25°C TA = −40°C to 105°C VOL mA − 7.5 − 15 17 − 8.0 − 15 17 − 9.0 − 15 17 V VCC − 0.25 VCC − 0.275 VCC − 0.10 − − VCC − 0.3 VCC − 0.35 VCC − 0.12 − − VCC − 0.3 VCC − 0.35 VCC − 0.12 − − V − VEE + 0.10 − VEE + 0.25 VEE + 0.275 − VEE + 0.12 − VEE + 0.3 VEE + 0.35 − VEE + 0.12 − VEE + 0.3 VEE + 0.35 tPHL tPLH − − 0.5 0.5 − − Output Fall Time VCC = 6.0 V, CL = 50 pF (Note 6) tFALL − 20 − ns Output Rise Time VCC = 6.0 V, CL = 50 pF (Note 6) tRISE − 16 − ns Propagation Delay 20 mV Overdrive, CL = 15 pF 5. The limits over the extended temperature range are guaranteed by design only. 6. Input signal: 1 kHz, squarewave signal with 10 ns edge rate. http://onsemi.com 5 ms NCS2200 Series, NCS2200A 1000 VCC = 5.0 V 11 ICC, SUPPLY CURRENT (mA) ICC, SUPPLY CURRENT (mA) 12 10 9.0 8.0 7.0 6.0 −50 −25 0 25 50 75 VCC = 5.0 V VCC = 2.7 V 10 0.1 Figure 1. NCS2200 Series Supply Current versus Temperature Figure 2. NCS2200 Series Supply Current versus Output Transition Frequency VCC − VOH, OUTPUT VOLTAGE HIGH STATE (mV) 10 8.0 6.0 4.0 TA = 85°C TA = 25°C 2.0 TA = −40°C 1.0 2.0 3.0 4.0 5.0 100 10 1.0 0.1 1.0 10 VCC, SUPPLY VOLTAGE (V) Isource, OUTPUT SOURCE CURRENT (mA) Figure 3. NCS2200 Series Supply Current versus Supply Voltage Figure 4. NCS2200 Output Voltage High State versus Output Source Current VCC = 5.0 V TA = 25°C 100 10 1.0 0.1 1.0 10 160 140 VCC = 5.0 V ILOAD = 4.0 mA 120 100 80 60 40 20 0 −100 −50 0 50 100 Isink, OUTPUT SINK CURRENT, (mA) TA, AMBIENT TEMPERATURE (°C) Figure 5. NCS2200 Series Output Voltage Low State versus Output Sink Current Figure 6. NCS2200 Series Output Voltage Low State versus Temperature http://onsemi.com 6 300 VCC = 5.0 V TA = 25°C 0.1 0.01 6.0 1000 0.1 0.01 100 FREQUENCY (kHz) 1000 0 10 1.0 TA, AMBIENT TEMPERATURE (°C) VOL, OUTPUT VOLTAGE LOW STATE (mV) ICC, SUPPLY CURRENT (mA) VOL, OUTPUT VOLTAGE LOW STATE (mV) 100 1.0 0.01 100 12 0 TA = 25°C 150 4.95 1.0 VCC = 5.0 V ILOAD = 4.0 mA 4.94 PROPAGATION DELAY (ms) VOH, OUTPUT VOLTAGE HIGH STATE (mV) NCS2200 Series, NCS2200A 4.93 4.92 4.91 4.90 4.89 4.88 −100 −50 0 50 100 0.8 tPLH 0.6 tPHL 0.4 0.2 VCC = 5.0 V Input Overdrive = 50 mV 0 −50 150 Figure 7. NCS2200 Series Output Voltage High State versus Temperature 25 1.2 PROPAGATION DELAY (ms) 600 tLH 500 400 tHL 300 200 TA = 25°C Input Overdrive = 100 mV 100 0 1.0 2.0 3.0 4.0 50 75 5.0 1.0 0.8 0.6 tPLH 0.4 tPHL 0.2 0 6.0 VCC = 2.7 V TA = 25°C 0 50 VCC, SUPPLY VOLTAGE (V) 100 150 Figure 10. NCS2200 Series Propagation Delay versus Input Overdrive VCC = 5.0 V TA = 25°C tPLH VCC 0.5 2 V/Div PROPAGATION DELAY (ms) 0.8 0.6 0.4 0.3 tPHL 0.2 Output 0.1 0 Input Overdrive = 50 mV 0 50 100 200 INPUT OVERDRIVE (mV) Figure 9. NCS2200 Series Output Response Time versus Supply Voltage 0.7 100 Figure 8. NCS2200 Series Propagation Delay versus Temperature 700 OUTPUT RESPONSE TIME (ns) 0 TA, AMBIENT TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) 0 −25 150 200 INPUT OVERDRIVE (mV) 10 ms/Div Figure 12. NCS2200 Series Powerup Delay Figure 11. NCS2200 Series Propagation Delay versus Input Overdrive http://onsemi.com 7 3.0 TA = 25°C 2.0 1.0 0 −1.0 −2.0 −3.0 1.0 2.0 3.0 4.0 5.0 6.0 ILEAK, OUTPUT LEAKAGE CURRENT (nA) VCM, INPUT COMMON MODE VOLTAGE RANGE (V) NCS2200 Series, NCS2200A 180 160 140 120 100 TA = 85°C 80 60 40 TA = 25°C 20 0 TA = −40°C 0 1.0 VS, SUPPLY VOLTAGE (V) 2.0 3.0 4.0 5.0 6.0 7.0 VOUT, OUTPUT VOLTAGE (V) Figure 13. NCS2200 Series Input Common Mode Voltage Range versus Supply Voltage Figure 14. NCS2202 Output Leakage Current versus Output Voltage http://onsemi.com 8 8.0 NCS2200 Series, NCS2200A OPERATING DESCRIPTION The NCS2200 Series is an industry first sub−one volt, low power comparator family. This series is designed for rail−to−rail input and output performance. These devices consume only 10 mA of supply current while achieving a typical propagation delay of 1.1 ms at a 20 mV input overdrive. Figures 10 and 11 show propagation delay with various input overdrives. This comparator family is guaranteed to operate at a low voltage of 0.85 V up to 6.0 V. This is accomplished by the use of a modified analog CMOS process that implements depletion MOSFET devices. The common−mode input voltage range extends 0.1 V beyond the upper and lower rail without phase inversion or other adverse effects. This series is available in the SOT−23−5 package. Additionally, the NCS2200 device is available in the tiny DFN 2x2.2 package and the SC70−5 package. NCS2200A is available in UDFN package. Output Stage The NCS2200 has a complementary P and N Channel output stage that has capability of driving a rail−to−rail output swing with a load ranging up to 5.0 mA. It is designed such that shoot−through current is minimized while switching. This feature eliminates the need for bypass capacitors under most circumstances. The NCS2202 has an open drain N−channel output stage that can be pulled up to 6.0 V (max) with an external resistor. This facilitates mixed voltage system applications. VCC VCC IN (+) IN (+) Output Output IN (−) IN (−) VEE VEE Figure 15. NCS2200SNxT1/NCS2200A Complementary Output Configuration Figure 16. NCS2202SNxT1 Open Drain Output Configuration VCC Cx Rx IN (−) NCS 2200 IN (+) VO OUT R2 R1 The oscillation frequency can be programmed as follows: 1 f+1+ T 2.2 RxCx Figure 17. Schmitt Trigger Oscillator http://onsemi.com 9 NCS2200 Series, NCS2200A VCC 1M R1 100 pF t0 R2 1M IN (−) NCS 2200 IN (+) VCC VO OUT C1 R3 The resistor divider R1 and R2 can be used to set the magnitude of the input pulse. The pulse width is set by adjusting C1 and R3. Figure 18. One−Shot Multivibrator http://onsemi.com 10 t0 t1 0 NCS2200 Series, NCS2200A +5 V +3 V 100 k IN (−) NCS 2202 IN (+) 100 k R pullup +3 V Logic Output OUT +5 V Logic Input This circuit converts 5 V logic to 3 V logic. Using the NCS2202/3 allows for full 5 V logic swing without creating overvoltage on the 3 V logic input. Figure 19. Logic Level Translator VCC IN (−) NCS 2200 IN (+) OUT 100 mV Figure 20. Zero−Crossing Detector http://onsemi.com 11 NCS2200 Series, NCS2200A ORDERING INFORMATION Pinout Style Output Type Package Shipping† N/A Complementary UDFN (Pb−Free) 3000 / Tape & Reel NCS2200SN1T1 1 Complementary SOT−23−5 (TSOP−5) 3000 / Tape & Reel NCS2200SN1T1G 1 Complementary SOT−23−5 (TSOP−5) (Pb−Free) 3000 / Tape & Reel NCS2200SN2T1 2 Complementary SOT−23−5 (TSOP−5) 3000 / Tape & Reel NCS2200SN2T1G 2 Complementary SOT−23−5 (TSOP−5) (Pb−Free) 3000 / Tape & Reel NCS2200SQ2T2 2 Complementary SC70−5 3000 / Tape & Reel NCS2200SQ2T2G 2 Complementary SC70−5 (Pb−Free) 3000 / Tape & Reel NCS2200SQLT1 N/A Complementary DFN, 2x2.2 3000 / Tape & Reel NCS2200SQLT1G N/A Complementary DFN, 2x2.2 (Pb−Free) 3000 / Tape & Reel NCS2202SN1T1 1 Open Drain SOT−23−5 (TSOP−5) 3000 / Tape & Reel NCS2202SN1T1G 1 Open Drain SOT−23−5 (TSOP−5) (Pb−Free) 3000 / Tape & Reel NCS2202SQ1T2G 1 Open Drain SC70−5 (Pb−Free) 3000 / Tape & Reel NCS2202SN2T1 2 Open Drain SOT−23−5 (TSOP−5) 3000 / Tape & Reel NCS2202SN2T1G 2 Open Drain SOT−23−5 (TSOP−5) (Pb−Free) 3000 / Tape & Reel NCS2202SQ2T2G 2 Open Drain SC70−5 (Pb−Free) 3000 / Tape & Reel Device NCS2200AMUT1G This device contains 93 active transistors. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 12 NCS2200 Series, NCS2200A MARKING DIAGRAMS SOT−23−5 (TSOP−5) SN SUFFIX CASE 483 SC70−5 SQ SUFFIX CASE 419A 5 5 CBx MG G CAx AYWG G 1 1 x = I for NCS2200SN1T1 J for NCS2200SN2T1 M for NCS2202SN1T1 N for NCS2202SN2T1 A = Assembly Location Y = Year W = Work Week G = Pb−Free Package CBx x = Specific Device Code = A for NCS2200SQ2T2 D for NCS2202SQ1T2G E for NCS2202SQ2T2G M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation, position, and underbar may vary depending upon manufacturing location. (Note: Microdot may be in either location) DFN6 2x2.2 SQL SUFFIX CASE 488 1 UDFN6 1.2x1.0 MU SUFFIX CASE 517AA CB MG G 1 SM G (Top View) S M G CB = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code overbar and underbar may vary depending upon manufacturing location. http://onsemi.com 13 = Specific Device Code = Date Code = Pb−Free Package NCS2200 Series, NCS2200A PACKAGE DIMENSIONS SOT−23−5 / TSOP−5 / SC59−5 SN SUFFIX PLASTIC PACKAGE CASE 483−02 ISSUE H D NOTE 5 2X 0.10 T 2X 0.20 T NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 5. OPTIONAL CONSTRUCTION: AN ADDITIONAL TRIMMED LEAD IS ALLOWED IN THIS LOCATION. TRIMMED LEAD NOT TO EXTEND MORE THAN 0.2 FROM BODY. 5X 0.20 C A B M 5 1 4 2 L 3 B S K DETAIL Z G A DIM A B C D G H J K L M S DETAIL Z J C 0.05 SEATING PLANE H T MILLIMETERS MIN MAX 3.00 BSC 1.50 BSC 0.90 1.10 0.25 0.50 0.95 BSC 0.01 0.10 0.10 0.26 0.20 0.60 1.25 1.55 0_ 10 _ 2.50 3.00 SOLDERING FOOTPRINT* 0.95 0.037 1.9 0.074 2.4 0.094 1.0 0.039 0.7 0.028 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 14 NCS2200 Series, NCS2200A PACKAGE DIMENSIONS DFN6, 2x2.2 SQL SUFFIX CASE 488−03 ISSUE G D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. 5. TERMINAL b MAY HAVE MOLD COMPOUND MATERIAL ALONG SIDE EDGE. 6. DETAILS A AND B SHOW OPTIONAL VIEWS FOR END OF TERMINAL LEAD AT EDGE OF PACKAGE AND SIDE EDGE OF PACKAGE. B A ÍÍÍ ÍÍÍ ÍÍÍ E PIN ONE REFERENCE 0.10 C 2X DIM A A1 A3 b b1 D D2 E e L L1 TOP VIEW 2X 0.10 C A3 DETAIL B 0.10 C A 6X 0.08 C A1 SIDE VIEW 0.10 C A 0.05 C C B b1 NOTE 3 1 SEATING PLANE 0.20 0.30 0.40 0.30 0.00 MILLIMETERS NOM MAX 0.90 1.00 0.03 0.05 0.20 REF 0.25 0.30 0.35 0.40 2.00 BSC 0.50 0.60 2.20 BSC 0.65 BSC 0.35 0.40 0.05 0.10 SOLDERING FOOTPRINT* 0.50 0.020 e 3 MIN 0.80 0.00 DETAIL A D2 6 6X 4 L 0.40 0.016 0.50 0.020 b 5X 0.10 C A BOTTOM VIEW 0.05 C EDGE OF PACKAGE L1 A1 DETAIL A Bottom View (Optional) B ÉÉ ÉÉ 1.9 0.075 0.65 0.025 SCALE 10:1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. NOTE 3 EXPOSED Cu MOLD CMPD 0.65 0.025 A3 DETAIL B Side View (Optional) http://onsemi.com 15 NCS2200 Series, NCS2200A PACKAGE DIMENSIONS SC70−5/SC88A (SOT−353) SQ SUFFIX CASE 419A−02 ISSUE J A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A−01 OBSOLETE. NEW STANDARD 419A−02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. G 5 4 −B− S 1 2 DIM A B C D G H J K N S 3 D 5 PL 0.2 (0.008) M B M N INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 J C K H SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 16 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 NCS2200 Series, NCS2200A PACKAGE DIMENSIONS UDFN6, 1.2x1.0, 0.4P CASE 517AA−01 ISSUE C EDGE OF PACKAGE PIN ONE REFERENCE 2X 0.10 C L1 ÉÉ ÉÉ E DETAIL A Bottom View (Optional) TOP VIEW 2X EXPOSED Cu 0.10 C (A3) 0.10 C A1 A 10X 0.08 C ÉÉÉ ÉÉÉ A3 DETAIL B Side View (Optional) 5X MILLIMETERS MIN MAX 0.45 0.55 0.00 0.05 0.127 REF 0.15 0.25 1.20 BSC 1.00 BSC 0.40 BSC 0.30 0.40 0.00 0.15 0.40 0.50 MOUNTING FOOTPRINT* C A1 DIM A A1 A3 b D E e L L1 L2 MOLD CMPD SEATING PLANE SIDE VIEW 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. A B D 6X 6X 0.42 L 0.22 3 L2 6X b 0.10 C A B 0.05 C 6 4 0.40 PITCH e NOTE 3 BOTTOM VIEW 1.07 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 17 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NCS2200/D