SPICE MODEL: B130LAW B130LAW Lead-free 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features · Guard Ring Die Construction for Transient Protection · · Very Low Forward Voltage Drop SOD-123 Lead Free by Design/RoHS Compliant (Note 3) Mechanical Data · · · · · · · · · · D H J G Case: SOD-123 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 A B Min Max A 3.55 3.85 B 2.55 2.85 C 1.40 1.70 D — 1.35 0.45 0.65 E Moisture Sensitivity: Level 1 per J-STD-020C 0.55 Typical 0.25 G E C Terminals: Solderable per MIL-STD-202, Method 208 Dim Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe) Polarity: Cathode Band Marking: Date Code & Type Code, See Page 4 — H 0.11 Typical J — 0.10 a 0° 8° All Dimensions in mm Type Code: SX Ordering Information: See Page 4 Weight: 0.01 grams (approximate) Maximum Ratings @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 30 V VR(RMS) 21 V Average Forward Current (See Figure 6) IF(AV) 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 12 A Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Power Dissipation (Note 2) Typical Thermal Resistance Junction to Ambient (Note 2) Operating Temperature Range (See Figure 7) Storage Temperature Range Electrical Characteristics Characteristic Pd 450 mW RqJA 222 °C/W Tj -55 to +125 °C TSTG -55 to +150 °C @ TA = 25°C unless otherwise specified Symbol Min Typ Max Unit V(BR)R 30 ¾ ¾ V IR = 1.5mA Forward Voltage VF ¾ ¾ ¾ 0.25 0.35 0.38 ¾ 0.37 0.42 V IF = 0.1A IF = 0.7A IF =1.0A Leakage Current (Note 1) IR ¾ 0.15 1.0 mA VR = 30V, TA = 25°C Total Capacitance CT ¾ 40 ¾ pF VR = 10V, f = 1.0MHz Reverse Breakdown Voltage (Note 1) Notes: Test Condition 1. Short duration pulse test used to minimize self-heating effect. 2. Part mounted on FR-4 board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 3. No purposefully added lead. DS30308 Rev. 7 - 2 1 of 4 www.diodes.com B130LAW ã Diodes Incorporated IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) 10 Tj = 125°C 1 Tj = 25°C 0.1 0.01 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 100 VR = 30V VR = 5V 1.0 VR = 3V VR = 1V 0.1 0.01 20 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1, Typical Forward Characteristics 40 60 80 100 120 140 TJ, JUNCTION TEMPERATURE (°C) Fig. 2, Typical Pulsed Reverse Characteristics 1000 12.5 Tj = 25ºC f = 1MHz 10 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) VR = 10V 10 7.5 5.0 2.5 100 8.3ms Single Half Sine-Wave 10 0 1 10 0.1 100 NUMBER OF CYCLES AT 60 Hz Fig. 3, Maximum Non-Repetitive Peak Forward Surge Current DS30308 Rev. 7 - 2 2 of 4 www.diodes.com 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4, Typical Total Capacitance vs. Reverse Voltage B130LAW ÓDiodes Incorporated Tj = 125°C RECTANGULAR WAVEFORM 120 TA, AMBIENT TEMPERATURE (°C) PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 140 0.5 0.4 180° 360° 0.3 0.2 0.1 Note 4 100 Note 5 80 60 40 180° 20 360° 0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 0 0.2 0.4 0.6 0.8 1 1.2 IF(AVE), AVERAGE FORWARD CURRENT (A) Fig. 6, Forward Current Derating IF(AVE), AVERAGE FORWARD CURRENT (A) Fig. 5, Forward Power Derating TA, DERATED AMBIENT TEMPERATURE (°C) RECTANGULAR WAVEFORM 125 Note 6 100 75 50 25 10 0 20 30 VR, REVERSE VOLTAGE (V) Fig. 7 Operating Temperature Derating Notes: 4. Device mounted on GETEK substrate, 2”x2”, 2 oz. copper, double-sided, cathode pad dimensions 0.75” x 1.0”, anode pad dimensions 0.25” x 1.0”. 5. Device mounted on FR-4 substrate, 2”x2”, 2 oz. copper, single-sided, pad layout as per Diodes Inc. suggested pad layout document AP02001 which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 6. RqJA estimated to be approximately 220 °C/W. DS30308 Rev. 7 - 2 3 of 4 www.diodes.com B130LAW ÓDiodes Incorporated Ordering Information Notes: 7. (Note 7) Device Packaging Shipping B130LAW-7-F SOD-123 3000/Tape & Reel For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YM SX SX = Product Type Marking Code YM = Date Code Marking Y = Year (ex: T = 2006) M = Month (ex: 9 = September) Date Code Key Year 2006 2007 2008 2009 2010 2011 2012 Code T U V W X Y Z Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30308 Rev. 7 - 2 4 of 4 www.diodes.com B130LAW ÓDiodes Incorporated