DIODES ZXMN6A11DN8TA

ZXMN6A11DN8
60V SO8 Dual N-channel enhancement mode MOSFET
Summary
RDS(on) (⍀)
ID (A)
0.120 @ VGS= 10V
3.2
0.180 @ VGS= 4.5V
2.6
V(BR)DSS
60
Description
This new generation trench MOSFET from Zetex features a unique
structure combining the benefits of low on-resistance and fast
switching, making it ideal for high efficiency power management
applications.
Features
D1
•
Low on-resistance
•
Fast switching speed
•
Low threshold
•
Low gate drive
•
Low profile SOIC package
G1
D2
G2
S1
S2
Applications
•
DC-DC converters
•
Power management functions
•
Motor control
Ordering information
Device
Reel size
(inches)
Tape width
(mm)
Quantity
per reel
7
12
500
ZXMN6A11DN8TA
S1
D1
G1
D1
S2
D2
G2
D2
Pin out - top view
Device marking
ZXMN
6A11D
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
1
www.zetex.com
ZXMN6A11DN8
Absolute maximum ratings
Parameter
Symbol
Limit
Unit
Drain-source voltage
VDSS
60
V
Gate-source voltage
VGS
±20
V
ID
3.2
A
Continuous drain current @ VGS= 10V; Tamb=25°C(b)
@ VGS= 10V; Tamb=70°C(b)
2.6
@ VGS= 10V; Tamb=25°C(a)
2.5
IDM
13.7
A
IS
3.1
A
Pulsed source current (body diode)(c)
ISM
13.7
A
Power dissipation at Tamb =25°C(a)(d)
PD
1.25
W
10
mW/°C
1.8
W
14
mW/°C
2.1
W
17
mW/°C
Tj, Tstg
-55 to +150
°C
Pulsed drain current(c)
Continuous source current (body diode)(b)
Linear derating factor
PD
Power dissipation at Tamb =25°C(a)(e)
Linear derating factor
PD
Power dissipation at Tamb =25°C(b)(d)
Linear derating factor
Operating and storage temperature range
Thermal resistance
Parameter
Symbol
Limit
Unit
ambient(a)(d)
R⍜JA
100
°C/W
Junction to ambient(a)(e)
R⍜JA
70
°C/W
Junction to ambient(b)(d)
R⍜JA
60
°C/W
Junction to
NOTES:
(a) For a device surface mounted on 25mm x 25mm FR4 PCB with high coverage of single sided 1oz copper, in still air
conditions.
(b) For a device surface mounted on FR4 PCB measured at t ⱕ10 sec.
(c) Repetitive rating - 25mm x 25mm FR4 PCB, D=0.02, pulse width 300␮s - pulse width limited by maximum junction
temperature.
(d) For a dual device with one active die.
(e) For a device with two active die running at equal power.
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
2
www.zetex.com
ZXMN6A11DN8
Typical characteristics
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
3
www.zetex.com
ZXMN6A11DN8
Electrical characteristics (at Tamb = 25°C unless otherwise stated)
Parameter
Symbol
Min.
Typ.
Max. Unit Conditions
Static
Drain-source breakdown voltage V(BR)DSS
60
V
ID= 250␮A, VGS=0V
Zero gate voltage drain current
IDSS
1.0
␮A
VDS= 60V, VGS=0V
Gate-body leakage
IGSS
100
nA
VGS=±20V, VDS=0V
Gate-source threshold voltage
VGS(th)
Static drain-source on-state
resistance (*)
RDS(on)
Forward transconductance(*)(‡)
gfs
Input capacitance
1.0
V
ID= 250␮A, VDS=VGS
0.120
⍀
VGS= 10V, ID= 2.5A
0.180
⍀
VGS= 4.5V, ID = 2A
4.9
S
VDS= 15V, ID= 2.5A
Ciss
330
pF
Output capacitance
Coss
35.2
pF
VDS= 40V, VGS=0V
f=1MHz
Reverse transfer capacitance
Crss
17.1
pF
Turn-on-delay time
td(on)
1.95
ns
Rise time
tr
3.5
ns
Turn-off delay time
td(off)
8.2
ns
Fall time
tf
4.6
ns
Gate charge
Qg
3.0
nC
VDS= 15V, VGS= 5V
ID= 2.5A
Total gate charge
Qg
5.7
nC
Gate-source charge
Qgs
1.25
nC
VDS= 15V, VGS= 10V
ID= 2.5A
Gate drain charge
Qgd
0.86
nC
Diode forward voltage(*)
VSD
0.85
Reverse recovery time(‡)
trr
Reverse recovery charge(‡)
Qrr
Dynamic(‡)
Switching (†) (‡)
VDD= 30V, ID= 2.5A
RG≅6.0⍀, VGS= 10V
Source-drain diode
0.95
V
Tj=25°C, IS= 2.8A,
VGS=0V
21.5
ns
20.5
nC
Tj=25°C, IS= 2.5A,
di/dt=100A/␮s
NOTES:
(*) Measured under pulsed conditions. Pulse width = 300␮s. Duty cycle ⱕ2%.
(†) Switching characteristics are independent of operating junction temperature.
(‡) For design aid only, not subject to production testing.
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
4
www.zetex.com
ZXMN6A11DN8
Typical characteristics
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
5
www.zetex.com
ZXMN6A11DN8
Typical characteristics
Current
regulator
QG
12V
VG
QGS
50k
Same as
D.U.T
QGD
VDS
IG
D.U.T
ID
VGS
Charge
Basic gate charge waveform
Gate charge test circuit
VDS
90%
RD
VGS
VDS
RG
VCC
10%
VGS
td(on)
tr
t(on)
td(off)
tr
t(on)
Switching time waveforms
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
Switching time test circuit
6
www.zetex.com
ZXMN6A11DN8
Intentionally left blank
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
7
www.zetex.com
ZXMN6A11DN8
Package outline - SO8
DIM
Inches
Millimeters
DIM
Inches
Min.
Millimeters
Min.
Max.
Min.
Max.
Max.
A
0.053
0.069
1.35
1.75
e
A1
0.004
0.010
0.10
0.25
b
0.013
0.020
0.33
0.51
D
0.189
0.197
4.80
5.00
c
0.008
0.010
0.19
0.25
H
0.228
0.244
5.80
6.20
⍜
0°
8°
0°
8°
E
0.150
0.157
3.80
4.00
h
0.010
0.020
0.25
0.50
L
0.016
0.050
0.40
1.27
-
-
-
-
-
0.050 BSC
Min.
Max.
1.27 BSC
Note: Controlling dimensions are in inches. Approximate dimensions are provided in millimeters
Europe
Americas
Asia Pacific
Corporate Headquarters
Zetex GmbH
Kustermann-park
Balanstraße 59
D-81541 München
Germany
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
[email protected]
Zetex Inc
700 Veterans Memorial Highway
Hauppauge, NY 11788
USA
Zetex (Asia Ltd)
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
Zetex Semiconductors plc
Zetex Technology Park, Chadderton
Oldham, OL9 9LL
United Kingdom
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
[email protected]
Telephone: (852) 26100 611
Fax: (852) 24250 494
[email protected]
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
[email protected]
For international sales offices visit www.zetex.com/offices
Zetex products are distributed worldwide. For details, see www.zetex.com/salesnetwork
This publication is issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or
reproduced for any purpose or form part of any order or contact or be regarded as a representation relating to the products or services concerned.
The company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.
Issue 3 - September 2006
© Zetex Semiconductors plc 2006
8
www.zetex.com