Analog Microelectronics, Inc. Micropower Voltage Reference Diode AME40 n General Description n Key Features The AME40 is a micropower 2-terminal band-gap voltage regulator diode. It operates over a 40µA to 20mA current range. Each circuit is trimmed at wafer sort to provide a ±0.20% and ±0.50% initial tolerance. The design of the AME40 allows for a large range of load capacitances and operating currents. The low start-up current makes these part ideal for battery applications. Analog Microelectronics offers this part in a TO-92, SO-8 packages as well as the space saving SOT-23. l Small packages: SOT-23, TO-92, SO-8 l Tolerates capacitive loads l Fixed reverse breakdown voltage of 2.5V l Tight voltage tolerance ---------- ±0.20%, ±0.50% l Wide operating current ---------- 40µA to 20mA l Wide temperature range -------- -40oC to +85oC l Low temperature coefficient --- 100ppm/oC (max) l Excellent transient response n Applications l l l l l l Portable electronics Power supplies Computer peripherals Data acquisition systems Battery chargers Consumer electronics n Functional Block Diagram n Typical Application VR VS RS VR B andgap Cell GND Current S hunt V R = 2.5V RS = 1 I 1000pF V alue optional VS - VR I Analog Microelectronics, Inc. Micropower Voltage Reference Diode AME40 n Package Outline SOT-23 Top View TO-92-3 Bottom View NC * + NC * + TO-92-2 Bottom View + - - - SO-8 Top View NC 1 8 + NC 2 7 NC NC 3 6 NC - 4 5 NC * The NC pin must float or be connected to - (negative) n Ordering Information 2 Part Number Accuracy Marking AME40BEET 0.2% ACUww SOT-23 -40OC to +85OC AME40BEHA 0.2% AME 40BEHA yyww SO-8 -40OC to +85OC AME40AEET 0.5% ABZww SOT-23 -40OC to +85OC TO-92-2 -40OC to +85OC TO-92-3 -40OC to +85OC SO-8 -40OC to +85OC AME40AEAS 0.5% AME40AEAT 0.5% AME40AEHA 0.5% AME 40 AEAS yyww AME 40 AEAT yyww AME 40AEHA yyww Package Operating Temp. Range Please consult AME sales office or authorized Rep./Distributor for other voltage accuracy and package type availability. Analog Microelectronics, Inc. Micropower Voltage Reference Diode AME40 n Absolute Maximum Ratings Parameter Maximum Unit 20 mA Rating Unit Supply Current n Recommended Operating Conditions Parameter 60µA ~ 12mA Supply Current Ambient Temperature Range -40 to +85 o Junction Temperature -40 to +125 o C C n Thermal Information Parameter Maximum SOT-23 Unit 336 o Thermal Resistance C/W TO-92 180 Maximum Junction Temperature 150 o Maximum Lead Temperature ( 10 Sec) 300 o C C Caution: Stress above the listed absolute rating may cause permanent damage to the device 3 Analog Microelectronics, Inc. Micropower Voltage Reference Diode AME40 n Electrical Specifications Unless otherwise specified, TA = 25 o C, I = 100 µA PARAMETER SYMBOL Reference Voltage, ±0.2% VREF TEST CONDITIONS 4 TYP MAX UNITS 2.495 2.500 2.505 V 2.487 2.500 2.513 V 40 µA TA = 25oC, IREF = 100µA Reference Voltage, ±0.5% Minimum Current MIN IMIN IMIN < I < 1mA Reference Voltage Change With Current dVREF/I Reference Voltage Temp. Coeff. VREFTC 1.5 3 mV 1mA < I < 20mA 0oC < TA < 70oC 4 8 100 ppm/oC Analog Microelectronics, Inc. Micropower Voltage Reference Diode AME40 Normalized Percentage Change vs. Temperature Output Voltage Change vs. Current 0.1 0 o % Change of VOUT 25 C -0.1 5 V /D IV I = 100µA -0.2 V IN -0.3 -0.4 -0.5 VR 0 .5 V /D IV -0.6 -50 0 50 100 150 ( O C) Reverse Characteristic Forward Characteristic 100µA 1.0V 10µA IR 25oC 85oC 0.125V/div 1µA 85oC 25oC 100nA 0.0V 0.65V 1.3V 1µA VR Transient Response o 25 C 5V/DIV VIN VR 0.5V/DIV 200µS/DIV 5 0.0V 100µA 10mA Analog Microelectronics, Inc. Micropower Voltage Reference Diode AME40 n Package Dimension SOT-23 SYMBOLS MILLIMETERS INCHES MIN MAX MIN MAX A 1.00 1.40 0.0394 0.0551 A1 0.00 0.15 0.0000 0.0059 b 0.35 0.50 0.0138 0.0197 C 0.09 0.25 0.0035 0.0098 D 2.70 3.10 0.1063 0.1220 E 1.40 1.80 0.0551 0.0709 1.90 BSC e 0.0748 BSC H 2.60 3.00 0.1024 0.1181 L 0.35 0.55 0.0138 0.0197 θ1 o o 0 R 9 o 9o 0 0.95(TYP) 0.0374(TYP) MILLIMETERS INCHES SO-8 SYMBOLS MIN MAX MIN MAX A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.004 0.010 A2 θ 1.45 REF B 0.33 0.51 0.013 0.020 C 0.19 0.25 0.007 0.010 D 4.80 5.00 0.189 0.1970 E 3.80 4.00 0.150 0.157 e 1.27 BSC 0.050 BSC H 5.80 6.20 0.228 0.244 L 0.40 1.27 0.016 0.050 y θ 6 0.057 REF 0.10 o 0 o 8 0.004 o 0 8o Analog Microelectronics, Inc. AME40 Micropower Voltage Reference Diode n Package Dimension TO-92-3 MILLIMETERS MIN MAX INCHES MIN MAX A 4.32 4.95 0.170 0.195 b 0.36 0.51 0.014 0.020 E 3.30 3.94 0.130 0.155 e 2.41 2.67 0.095 0.105 e1 1.14 1.40 0.045 0.055 L 12.70 15.49 0.500 0.610 R 2.16 2.41 0.085 0.095 S1 1.14 1.52 0.045 0.060 SYMBOLS W 0.41 0.56 0.016 0.022 D 4.45 4.95 0.175 0.195 a 4 ° ° 6 ° 4 ° 6 NOTE: 1. PACKAGE OUTLINE EXCLUSIVE OF ANY MOLD FLASHES DIMENSION 2. PACKAGE OUTLINE EXCLUSIVE OF BURR DIMENSION TO-92-2 MILLIMETERS MIN MAX INCHES MIN MAX A 4.32 4.95 0.170 0.195 b 0.36 0.51 0.014 0.020 E 3.30 3.94 0.130 0.155 e 2.41 2.67 0.095 0.105 SYMBOLS e1 1.14 1.40 0.045 0.055 L 12.70 15.49 0.500 0.610 R 2.16 2.41 0.085 0.095 S1 1.14 1.52 0.045 0.060 W 0.41 0.56 0.016 0.022 D 4.45 4.95 0.175 0.195 a ° 4 ° 6 ° 4 ° 6 NOTE: 1. PACKAGE OUTLINE EXCLUSIVE OF ANY MOLD FLASHES DIMENSION 2. PACKAGE OUTLINE EXCLUSIVE OF BURR DIMENSION 7 www.analogmicro.com E-Mail: [email protected] Life Support Policy: These products of Analog Microelectronics, Inc. are not authorized for use as critical components in lifesupport devices or systems, without the express written approval of the president of Analog Microelectronics, Inc. Analog Microelectronics, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. Analog Microelectronics, Inc. , October 2001 Document: 2003-DS40-D Corporate Headquarters Asia Pacific Headquarters Analog Microelectronics, Inc. AME, Inc. 3100 De La Cruz Blvd. Suite 201 Santa Clara, CA. 95054-2046 2F, 187 Kang-Chien Road, Nei-Hu District Taipei 114, Taiwan, R.O.C. Tel : (408) 988-2388 Fax: (408) 988-2489 Tel : 886 2 2627-8687 Fax : 886 2 2659-2989