AD ADuM4190TRIZ

High-stability Isolated Error Amplifier
ADuM4190
Preliminary Technical Data
FEATURES
GENERAL DESCRIPTION
Stable Over Time and Temperature
0.5% initial accuracy
1% accuracy over the full temp range
For Type II or Type III compensation networks
Reference voltage 1.225V
Compatible with DOSA
Low power operation: <7 mA total
Wide Supply Voltage Range
VDD1 – 3V to 20V
VDD2 - 3V to 20V
Bandwidth – 400kHz
Isolation Voltage
5.0kVrms reinforced
Wide temperature range:
-40C to 125°C ambient operation
150C maximum junction temperature
The ADuM4190 is an isolated error amplifier based on Analog
Devices, Inc. iCoupler® technology. The ADuM4190 is ideal for
linear feedback power supplies with primary side controllers
enabling improvements in transient response, power density
and stability as compared to commonly used optocoupler and
shunt regulator solutions.
Unlike optocoupler-based solutions, which have an uncertain
current-transfer-ratio over lifetime and at high temperatures,
the ADuM4190 transfer function does not change over lifetime
and is stable over a wide temperature range of -40C to 125C.
Included is a wide band operational amplifier which can be used
to set up a variety of commonly used power supply loop
compensation techniques. The ADuM4190 is fast enough to
allow a feedback loop to react to fast transient conditions and
over current conditions. Also, included is a high accuracy
1.225V reference to compare with the supply output set point.
APPLICATIONS
The ADuM4190 is packaged in a wide body SO-16 package for
reinforced 5kVrms isolation rating.
Linear Power Supplies
Inverters
UPS
DOSA Compatible Modules
Voltage Monitor
FUNCTIONAL BLOCK DIAGRAM
Figure 1. ADuM4190
1
Protected by U.S. Patents 5,952,849, 6,873,065 and 7,075,329. Other patents pending.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otheRQise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2013 Analog Devices, Inc. All rights reserved.
ADuM4190
Preliminary Technical Data
TABLE OF CONTENTS
Features ................................................................................................................................................................................................................................1 Applications .........................................................................................................................................................................................................................1 General Description ...........................................................................................................................................................................................................1 Functional Block Diagram ................................................................................................................................................................................................1 Figure 1. ADuM4190 .........................................................................................................................................................................................................1 Specifications with VDD1 = VDD2 = 3 V to 20 V, Ta = -40 to 125°C ................................................................................................................................3 Package Characteristics .................................................................................................................................................................................................5 Regulatory Information .................................................................................................................................................................................................5 Insulation and Safety-Related Specifications ..............................................................................................................................................................6 Recommended Operating Conditions ........................................................................................................................................................................6 Absolute Maximum Ratings..............................................................................................................................................................................................7 ESD Caution ....................................................................................................................................................................................................................7 Pin Configurations and Function Descriptions .............................................................................................................................................................8 Outline Dimensions ...........................................................................................................................................................................................................9 Ordering Guide...............................................................................................................................................................................................................9 Revision History
Rev. PrA| Page 2 of 9
Preliminary Technical Data
ADuM4190
SPECIFICATIONS WITH VDD1 = VDD2 = 3 V TO 20 V, TA = TMIN TO TMAX
Table 1. All typical specifications are at TA = 25°C, VDD1 = VDD2 = 5V.
Parameter
Accuracy
Initial Error
Total Error
Op Amp
Offset Error
Open Loop Gain
Input Common-mode Range
Gain Bandwidth Product
Common-mode rejection
Input Capacitance
Output Voltage Range
Input bias current
Reference
Output Voltage
Output Current
UVLO
Positive Going Threshold
Negative Going Threshold
EAOUT Impedance
OUTPUT CHARACTERISTICS
Output Gain
Output -3dB Bandwidth
A and S Grade
B and T Grade
Output Voltage, EAOUT Low
Output Voltage, EAOUT High
Output Voltage, EAOUT2 Low
Output Voltage, EAOUT2 High
Output Voltage, EAOUT2 Low
Output Voltage, EAOUT2 High
Output Voltage Noise
POWER SUPPLY
Operating Range
Operating Range
Power Supply Rejection
Supply Current
Conditions
= (1.225V - EAOUT)/1.225V Refer to Figure 2
TA = 25C
TA = TMIN to TMAX
Min
-5
66
0.35
Typ
Max
Unit
0.25%
0.5%
0.5%
1%
V/V
V/V
+/-2.5
80
5
mV
dB
V
MHz
dB
pF
V
A
1.5
10
72
2
COMP pin
0.2
2.7
0.01
at 25C, 0 to 1mA load, CREFOUT = 15pF
-40 to 125C , 0 to 1mA load, CREFOUT =
15pF
CREFOUT = 15pF
1.220
1.213
Comp to EAOUT, DC, 0.3 to 2.4V
Comp to EAOUT2, DC, 0.4 to 5.0V
Comp to EAOUT, 0.3 to 2.4V, +/- 3mA
Comp to EAOUT2, 0.4 to 5.0V, +/- 1mA
+/- 3mA output
+/- 3mA output
VDD1 = 4.5V to 5.5V, +/- 1mA output
VDD1 = 4.5V to 5.5V, +/- 1mA output
VDD1 = 10 to 20V, +/- 1mA output
VDD1 = 10 to 20V, +/- 1mA output
1.230
1.237
2.0
0.9
2.24
1.0
2.6
100
250
200
400
V
V
Ohms
1.1
2.86
0.4
2.4
4.8
5.0
Figure 2
2.5
0.2
4.9
0.2
5.4
0.6
0.6
1.7
VDD1
VDD2
DC , VDD1 = VDD2 = 3V to 20V
IDD1
IDD2
Rev. PrA| Page 3 of 9
V
V
mA
2.8
2.6
High Z
VDD2 < UVLO threshold or VDD1 < UVLO
threshold
From
From
From
From
1.225
1.225
3.0
3.0
60
kHz
kHz
V
V
V
V
V
V
mVRMS
20
20
1.4
2.9
V/V
V/V
2.0
5.0
V
V
dB
mA
mA
ADuM4190
Preliminary Technical Data
Figure 2. ADuM4190 Test Circuit 1
Figure 3. ADuM4190 Test Circuit 2
Figure 4. ADuM4190 Test Circuit 3
Rev. PrA| Page 4 of 9
ADuM4190
Preliminary Technical Data
PACKAGE CHARACTERISTICS
Table 2.
Parameter
Resistance (Input-to-Output)1
Capacitance (Input-to-Output)1
Input Capacitance2
IC Junction-to-Ambient Thermal
Resistance
16-Lead SOIC_IC
1
2
Symbol
RI-O
CI-O
CI
Min
Typ
1013
2.2
4.0
Max
Unit
Ω
pF
pF
Test Conditions
f = 1 MHz
Thermocouple located at center of package underside
θJA
45
°C/W
The device is considered a 2-terminal device; Pin 1 through Pin 8 are shorted together, and Pin 9 through Pin 16 are shorted together.
Input capacitance is from any input data pin to ground.
REGULATORY INFORMATION
1
The ADuM4190 will be approved by the organizations listed in Table3. See Table 5 and the section for recommended maximum working
voltages for specific cross-isolation waveforms and insulation levels.
Table 3.
UL
Recognized under UL 1577
Component Recognition
Program1
Single 5000 V rms
Isolation Voltage
File E214100
CSA
Approved under CSA Component Acceptance Notice #5A
VDE
Certified according to DIN V VDE V 0884-10
(VDE V 0884-10): 2006-121
Reinforced insulation per CSA 60950-1-03 and IEC 60950-1,
400 V rms (565 V peak) maximum working voltage
Basic insulation per CSA 60950-1-03 and IEC 60950-1,
800 V rms(1131 V peak) maximum working voltage
File 205078
Reinforced insulation, 849 V peak
File 2471900-4880-0001
In accordance with UL 1577, each ADuM4190 is proof tested by applying an insulation test voltage ≥ 6000 V rms for 1 second (current leakage detection limit = 10 μA).
1
In accordance with DIN V VDE V 0884-10, each ADuM4190 is proof tested by applying an insulation test voltage ≥ 1590 V peak for 1 second (partial discharge detection
limit = 5 pC). An asterisk (*) marking branded on the component designates DIN V VDE V 0884-10 approval.
Rev. PrA| Page 5 of 9
ADuM4190
Preliminary Technical Data
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 4 ADuM4190.
Parameter
Rated Dielectric Insulation Voltage
Minimum External Air Gap (Clearance)
Symbol
L(I01)
Value
5000
8.0 min
Unit
V rms
mm
Minimum External Tracking (Creepage)
L(I02)
7.6 min
mm
Minimum Internal Gap (Internal Clearance)
Tracking Resistance (Comparative Tracking Index)
Isolation Group
CTI
0.017 min
>175
IIIa
mm
V
Conditions
1 minute duration
Measured from input terminals to output terminals,
shortest distance through air
Measured from input terminals to output terminals,
shortest distance path along body
Insulation distance through insulation
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0110, 1/89, Table 1)
Table 5. Maximum Continuous Working Voltage1
Parameter
AC Voltage, Bipolar Waveform
Max
560
Unit
V peak
Constraint
50-year minimum lifetime
AC Voltage, Unipolar Waveform
1131
V peak
50-year minimum lifetime
DC Voltage
1131
V peak
50-year minimum lifetime
1
Refers to continuous voltage magnitude imposed across the isolation barrier. See the Applications section for more details.
RECOMMENDED OPERATING CONDITIONS
Table 6.
Parameter
Operating Temperature
ADuM4190A/ADuM4190B
ADuM4190S/ADuM4190T
Symbol
TA
Supply Voltages1
VDD1, VDD2
Input Signal Rise and Fall
Times
Min
Max
Unit
−40
−40
+85
+125
°C
°C
3.0
20
V
1.0
ms
Rev. PrA| Page 6 of 9
Preliminary Technical Data
ADuM4190
1
All voltages are relative to their respective ground.
VDDI and VDDO refer to the supply voltages on the input and output sides of a
given channel, respectively. See the Applications section.
3
See Regulatory Information for maximum rated current values for various
temperatures.
4
Refers to common-mode transients across the insulation barrier. Commonmode transients exceeding the absolute maximum ratings may cause
latch-up or permanent damage.
ABSOLUTE MAXIMUM RATINGS
2
TA = 25°C, unless otherwise noted.
Table 7.
Parameter
Storage Temperature (TST) Range
Ambient Operating Temperature
(TA) Range
Junction Temperature
Supply Voltages (VDD1, VDD2)1
Supply Voltages (VREG1, VREG2)1
Input Voltages (+IN, -IN)
Output Voltages (REFOUT, Comp)
Output Voltages (REFOUT1, EAOUT)
EAOUT2
Average Output Current per Output
Pin
Common-Mode Transients4
Rating
−65°C to +150°C
−40°C to +125°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
−40°C to +150°C
−0.5 V to +24 V
−0.5 V to +3.6V
−0.5 V to +3.6V
−0.5 V to +3.6V
−0.5 V to +3.6V
−0.5 V to +5.5V
1
All voltages are relative to their respective ground. See the Applications
section for information on immunity to external magnetic fields.
−11 mA to + 11 mA
−100 kV/μs to +100 kV/μs
ESD CAUTION
Rev. PrA| Page 7 of 9
ADuM4190
Preliminary Technical Data
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
Figure 5. ADu41 90 Pin Configuration
Table 8. ADuM4190 Pin Functional Descriptions
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Mnemonic
VDD1
GND1
VREG1
REFOUT1
NC
EAOUT2
EAOUT
GND1
GND2
COMP
-IN
+IN
REFOUT
VREG2
GND2
VDD2
Description
Supply Voltage for Side 1 (3.0V to 20 V)
Ground Reference for Side 1
Internal Supply Voltage for Side 1. Connect a 1uF capacitor between VDD1 and GND1.
Reference Output Voltage for Side 1, maximum CREFOUT1 = 15pF.
No Connection, connect to GND1, do not leave floating.
Isolated Output Voltage, Open Drain Output, select pull-up resistor for up to 1mA current.
Isolated Output Voltage
Ground Reference for Side 1
Ground Reference for Side 2
Output of the Op Amp. Loop compensation network may be connected between COMP and -IN pins.
Inverting Op Amp input. Connection for the power supply set point and compensation network.
Non-Inverting Op Amp input. May be used as reference Input.
Reference Output Voltage for Side 2, maximum CREFOUT = 15pF.
Internal Supply Voltage for Side 2. Connect a 1uF capacitor between VDD2 and GND2.
Ground Reference for Side 2
Supply Voltage for Side 2 (3.0V to 20 V)
Rev. PrA| Page 8 of 9
Preliminary Technical Data
ADuM4190
OUTLINE DIMENSIONS
13.00 (0.5118)
12.60 (0.4961)
9
16
7.60 (0.2992)
7.40 (0.2913)
1
0.30 (0.0118)
0.10 (0.0039)
COPLANARITY
0.10
8
10.65 (0.4193)
10.00 (0.3937)
2.65 (0.1043)
2.35 (0.0925)
1.27
(0.0500)
BSC
0.51 (0.0201)
0.31 (0.0122)
0.75 (0.0295)
45°
0.25 (0.0098)
8°
0°
SEATING
PLANE
0.33 (0.0130)
0.20 (0.0079)
1.27 (0.0500)
0.40 (0.0157)
10-12-2010-A
COMPLIANT TO JEDEC STANDARDS MS-013-AC
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 6. 16-Lead Standard Small Outline Package, with Increased Creepage [SOIC_IC]
Wide Body (RI-16-1)
Dimension shown in millimeters and (inches)
ORDERING GUIDE
Model
ADuM4190ARIZ
ADuM4190BRIZ
ADuM4190SRIZ
ADuM4190TRIZ
Temperature Range
−40°C to +85°C
−40°C to +85°C
−40°C to +125°C
−40°C to +125°C
Bandwidth
(typical)
200kHz
400kHz
200kHz
400kHz
Package Description
16-Lead SOIC_IC
16-Lead SOIC_IC
16-Lead SOIC_IC
16-Lead SOIC_IC
©2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
PR11336-0-2/13(PrA)
Package
Option
RI-16-1
RI-16-1
RI-16-1
RI-16-1
www.analog.com/ADuM4190
Rev. PrA| Page 9 of 9