ELECTRONICS INDUSTRY (USA) CO., LTD. 103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com BR5000 - BR5010 SILICON BRIDGE RECTIFIERS BR50 PRV : 50 - 1000 Volts Io : 50 Amperes 0.728(18.50) 0.688(17.40) FEATURES : * * * * * * High case dielectric strength High surge current capability High reliability High efficiency Low reverse current Low forward voltage drop 0.570(14.50) 0.530(13.40) 0.685(16.70) 0.618(15.70) 0.210(5.30) 0.200(5.10) 0.658(16.70) 0.618(15.70) 0.032(0.81) 0.028(0.71) MECHANICAL DATA : * Case : Molded plastic with heatsink integrally mounted in the bridge encapsulation * Epoxy : UL94V-O rate flame retardant * Terminals : plated .25" (6.35 mm). Faston * Polarity : Polarity symbols marked on case * Mounting position : Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency. * Weight : 17.1 grams 1.130(28.70) 1.120(28.40) 0.252(6.40) 0.248(6.30) φ 0.100(2.50) 0.090(2.30) 0.905(23.0) 0.826(21.0) 0.310(7.87) 0.280(7.11) Metal Heatsink Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL BR5000 BR5001 BR5002 BR5004 BR5006 BR5008 BR5010 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Current Tc = 55°C IF(AV) 50 Amps. IFSM 500 Amps. Current Squared Time at t < 8.3 ms. 2 It 660 A2S Maximum Forward Voltage per Diode at IF=25 Amp. VF 1.1 Volts IR 10 µA IR(H) 200 µA RθJC 1.0 °C/W TJ - 40 to + 150 °C TSTG - 40 to + 150 °C Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range Notes : 1 ) Thermal resistance from Junction to Case with units mounted on a 9"x5"x4.6" (22.9x12.7x11.7 cm) Al-Finned Heatsink. UPDATE : JUNE 2, 1999 ELECTRONICS INDUSTRY (USA) CO., LTD. 103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com RATING AND CHARACTERISTIC CURVES (BR5000 - BR5010 ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 5 0 50 5 0 HEAT-SINK MOUNTING, Tc 9" x 5" x 4.6" THK. 5 5 (22.9 x 12.7 x 11.7cm) 0 0 Al.-Finned . PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES 60 5 0 40 30 20 10 0 0 25 50 75 100 125 150 600 500 T J = 50 °C 400 300 200 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 100 0 175 1 2 4 CASE TEMPERATURE, ( °C) FIG.3 - TYPICAL FORWARD CHARACTERISTICS 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE PER DIODE 10 100 T J = 100 °C REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES 6 NUMBER OF CYCLES AT 60Hz 10 Pulse Width = 300 µs 1 % Duty Cycle 1.0 1.0 T J = 25 °C 0.1 T J = 25 °C 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE, VOLTS 1.4 1.6 1.8 120 140