FUJITSU SEMICONDUCTOR DATA SHEET DS07-10204-1E Resonator Piezoelectric Resonator (4 to 16 MHz) FAR Family (C4 series P/Q type) For Motor Application ■ DESCRIPTION Fujitsu resonators C4 series (P/Q type) feature single crystals with a high electro-mechanical coefficient (LiNbO3: lithium niobate), the result is very compact packaging. C4 series (P/Q type) with built-in capacitors for exclusive use in microcomputer clocks, and this series is chip type device for surface-mount and suitable for motor appication due to its high reliability package. ■ FEATURES • • • • • Wide frequency range in 4 to 16 MHz Suitable for microcomputer clock PCT (121 °C, 2 atms, 96 hours) is guaranteed for Motor application. Emboss-typed pack for automatic mounting Superior shock and vibration resistance, preventing damage during automatic mounting ■ PACKAGE F 4.00 NMK A K F 8.00N FAR Family (C4 series P/Q type) ■ STANDARD CHARACTERISTICS Series C4 series (P/Q type) Parameter Material Lithium Niobate (LiNbO3) Frequency Standard frequency Remarks 4 to 16 MHz See “■ Standard Frequency.” Initial frequency deviation ±0.5% (M) The ±0.3% (K) version can also be produced. Temperature characteristic (–40°C to +105°C) ± 0.9 1.0 % (M) Reference temperature: +25°C Capacity of built-in capacitor 20±8 pF (standard) Within ±0.1% Aging stability PCT For ten years at room temperature Unsturated PCT: 121°C 2 atomospheric pressures 96 hours guaranteed Operating temperature –40°C to +105°C Storage temperature –55°C to +105°C Standard measuring circuit 10±4 pF, 30±8 pF are also available. Capacity is specified by Fujitsu, considering matching data with applied IC (mainly microcomputer). • Resonant frequency 4 MHz to 10 MHz IC: MB84069B×2 1 MΩ 10 MHz to 16.0 MHz IC: MC74HC04×2 R C1 • VCC: 5 V DC • R: Resonator • C1, C2: Loading capacitors (built-in) C2 FAR • Serial resonant resistance R 75 Ω OSC 2 C1 C2 75 Ω R: Resonator Measuring instrument: Network analyzer LM FAR Family (C4 series P/Q type) ■ STANDARD FREQUENCY Standard frequency (kHz) Package size Resonant resistance 4,000 P 150 Ω max. (Symbol: 01) 8,000 10,000 12,000 16,000 Q 75 Ω max. (Symbol: 02) Notes: • Fujitsu can also develop applicable device in addition to standard devices if it’s oscillation frequency is from 4 to 16 MHz. • Resonant resistance of the part other than standard, Fujitsu should specify its resonant resistance according to applied frequency. (See “• Frequency and standard resonant resistance.”) • Frequency and standard resonant resistance Frequency Standard resonant resistance 4.00 to 5.99 MHz 150 Ω max. (Symbol: 1) 6.00 to 16.00 MHz 75 Ω max. (Symbol: 2) ■ NOTES ON USE • Handle carefully • Solder under the following conditions. 5 seconds max. at 230°C (PCB) Recommended preheating is 150°C for one minute in order not to apply extreme heat to the resonator. • Avoid extreme fluctuations in temperature. • There is no specific direction in resonator mounting. • Oscillation data should be examined when used in oscillation circuit with microcomputer or other ICs. • This is for reflow solder, not for flow solder. 3 FAR Family (C4 series P/Q type) ■ PART NUMBERING SYSTEM FAR — C 4 C — (1) (2) (3) — (4) — (5) (6) (7) (8) (9) (1) Series Series Single crystal Capacitator C4 LiNbO3 With built-in capacitator (2) Package Type Specification Type C CHIP (3) Package Size Specification Size P Large (4.0 to 5.9 MHz) Q Small (6.0 to 16.0 MHz) (4) Frequency (Example) Unit: kHz (Specify in five digits.) Frequency Specification 8.000 MHz 08000 See “■ Standard Frequency”. (5) Initial Frequency Deviation Specification Deviation K ±0.3% M ±0.5% (6) Built-in Capacitor 4 Specification Capacitance 0 20±8 pF 1 10±4 pF 2 30±8 pF FAR Family (C4 series P/Q type) (7) Resonant Resistance Specification Resonant resistance 1 150 Ω 2 75 Ω (8) User-specific Special Symbols Specification Name — A to Z Description No specifications, no taping specification No specifications, with taping specification Serial number for custom design (9) Taping Specification Specification Description R 16 mm wide emboss tape (3,000 pcs) 5 FAR Family (C4 series P/Q type) ■ MARKING Frequency (MHz) Fujitsu logo F 8.00 NMK Lot No. (Date of manufacture, conforms to EIAJ) Initial frequency deviation Material symbol N: LiNbO3 Note: The marking color varies with the capacitance of the built-in capacitator. Capacitance Marking color 10 pF Yellow 20 pF White 30 pF Gray Data code (EIAJ standard) is specified as follows in four-year cycle. Year Month Symbol Year Month Symbol Year Month Symbol 1997 2001 6 Year Month Symbol 1 A 1 N 1 a 1 2 B 2 P 2 b 2 3 C 3 Q 3 4 D 4 R 4 d 4 5 F 5 S 5 e 5 6 G 6 T 6 f 7 H 7 U 8 I 8 V 8 9 J 9 W 9 10 K 10 X 10 10 11 L 11 Y 11 11 12 M 12 Z 12 12 1998 2002 1999 2003 n 3 7 2000 2004 6 t 7 u 8 j r 9 FAR Family (C4 series P/Q type) ■ PIN ASSIGNMENT (1) (2) (3) (1) (3) (2) ■ DIMENSIONS L1 2.5 W1 0.5 L W 1.5 2.54 2.54 Unit: mm Size L L1 W W1 P 10.0 9.4 4.5 3.3 Q 8.0 7.4 3.2 2.6 7 FAR Family (C4 series P/Q type) ■ TAPING FORM AND DIMENSIONS 4.0×10 = 40±0.2 0.1 0 W±0.1 7.65 (6.85) ±0.2 φ1.5± 8.0±0.1 ±0.1 2.1±0.1 Package size Reel form W t P 5.0 10.5 3.0 Q 3.7 8.5 2.8 18.0±1.5 2.0±0.5 ±0.2 φ330 φ80 φ13.0±0.5 φ21.0±0.8 R1.0 2.0±0.5 ⋅ Pack quantity Package size Quantity Unit: mm P, Q 8 3,000 16.0±0.2 2.0±0.1 1.5±0.1 4.0±0.1 FAR Family (C4 series P/Q type) FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-88, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F9705 FUJITSU LIMITED Printed in Japan 12