NEW Universal Plug connectors for PDC Type Digital Cellular Phones MQ138 Series Thin and short cover plug Short cover plug ■Overview The universal plug connectors will mate with most PDC type digital cellular phones. The major use of these connectors is for the connections of cellular phones with peripheral equipment. Three out of 16 contacts are removed from the housing for protection purpose of the cellular phones. Standard cover plug ■Features 1. Will interface with NTT DoCoMo, Vodafone and Tu-Ka cellular phones. 2. Variations Thin and short cover plugs, short cover plugs, and reverse cover plugs are available. Plugs with colors not listed in the catalog can be custom made. Please contact our sales representative for details. 3. Easy Wire Termination The lock spring and release buttons are incorporated in the outer shell, allowing easy placement of the terminated insulator, strain relief clamp and flexible boot. ■Applications Example of Connections with Peripheral Equipment PDC digital cellular phone PDC type digital cellular phones Notebook PC MQ138-M-16(13)S-CV 2004.3 1 ■Specifications Rating Current rating 1A Voltage rating 100V AC Characteristic Operating temperature range -55ç to +80ç (Note 1) Specification 11. Contact resistance 12. Insulation resistance 13. Dielectric Withstanding Voltage 14. Lock Strength 15. Mating/un-mating forces 16. Durability (mating/un-mating) 30 m ohms max. 1000 M ohms min. No flashover or insulation breakdown. No damage, cracks, or parts dislocation. Mating : 29.4N max. Contact resistance: 50 m ohms max. No damage, cracks or parts dislocation. 17. Vibration No electrical discontinuity of 10É sec. max. Contact resistance: 50 m ohms max. No damage, cracks, or parts dislocation. 18. Shock Contact resistance: 50 m ohms max. 19. Temperature cycle Insulation resistance: 1000 M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 50 m ohms max. Insulation resistance: 10 M ohms min. 10. Humidity No damage, cracks, or parts dislocation. Contact resistance: 50 m ohms max. 11. Salt Spray No corrosions Conditions 10 mA (DC or 1000 Hz) 250 V DC 350 V AC / one minute Pull force: 30N max. With corresponding connector. 5000 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours, 3 axis. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. Temperature : -55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç Time (Minutes) : 30 ➝ 5 ➝ 30 ➝ 5 5 cycles 96 hours at temperature of 40ç and humidity of 90% to 95% 5% salt water solution for 48 hours No deformation of the insulator parts affecting form, fit or Soldering temperature: 280ç to 300ç function. Recommended solder immersion time: 4 seconds max. 12. Solderability Note: Includes temperature rise caused by current flow. ■Materials Component Material Finish Remarks Insulator Polyamide Color: Black or Brown UL94V-0 Female contacts Copper alloy Gold plating ------------------- Cover Polycarbonate or ABS Color: Black (Note1) ------------------- Lock Push Button Thermoplastic compound Color: Light gray ------------------- Lock spring Stainless steel ------------------- ------------------- Note1: Outer shells available in various colors. Refer to page 3. ■Ordering Information MQ138 T - M - 16 (13) S - CV 1 2 1 Series name 3 4 : MQ138 Series 2 Plug length 6 4 Number of contact 5 Contact type 13 S: Female contact 6 Plug type Blank : Standard T : Thin and Short CV : Standard type : Short CVR : Reverse type S 3 Connector type 2 5 M :Universal Plug ■Thin and short cover type (4.2) (5.4) 5.4 5 (10.5) 17.5 (20) 4.8 (16) 18.9 20.4 Color of outer housings Part Number CL No. Gray MQ138T-M-16(13)S-CV CL206-2252-9 Ivory White MQ138T-M-16(13)S-CV(03) CL206-2252-9-03 No.7 No.1 No.15 No.9 ■Short cover type (Ø 5) (25) 5) 7 5 (2.2) (14) 19.5 (R (17) (18.9) 23 Marking Cover Color Gray MQ138S-M-16(13)S-CV1 CL206-2157-8 NTT Black MQ138S-M-16(13)S-CV1(01) CL206-2157-8-01 Light Gray MQ138S-M-16(13)S-CV1(02) CL206-2157-8-02 Ivory White MQ138S-M-16(13)S-CV1(03) CL206-2157-8-03 Gray MQ138S-M-16(13)S-CV2 CL206-2191-6 DoCoMo Vodafone or Tu-Ka No marking Part Number CL No. Black MQ138S-M-16(13)S-CV2(01) CL206-2191-6-01 Light Gray MQ138S-M-16(13)S-CV2(02) CL206-2191-6-02 Ivory White MQ138S-M-16(13)S-CV2(03) CL206-2191-6-03 Gray MQ138S-M-16(13)S-CV CL206-2192-9 Black MQ138S-M-16(13)S-CV(01) CL206-2192-9-01 Ivory White MQ138S-M-16(13)S-CV(03) CL206-2192-9-03 No.7 No.1 No.15 No.9 BRemarks[Thin and short cover plugs and Short cover plugs] 1 Thin and short cover plugs, and short cover plugs will not accept coaxial connectors. Use standard cover plugs for installing coaxial connectors. 2 The short cover plugs will not be supplied with the cable bushing. The cable bushing needs to be integrately molded to the cable. Refer to the customer drawing for recommended dimensions. 3 Power contacts are removed from the housing. 3 ■Standard cover type (Ø 7. 4) 10 5 (3) (14) 32 (R 3) (16) (17) (18.9) 23 Connector type Part Number CL No. Standard type MQ138-M-16(13)S-CV CL206-0749-6 Reverse type MQ138-M-16(13)S-CVR CL206-2031-0 ■Cable bushing(For standard cover only) No.7 No.1 No.15 No.9 ■Standard cover type D E C B A Part Number CL No. 4mm MQ138-BS(4.0)(01) CL206-0890-4-01 4.8mm MQ138-BS(4.8)(01) CL206-0683-0-01 5.2mm MQ138-BS(5.2)(01) CL206-0662-0-01 ■Clamp A Option Cable Dia. B C D E Plug Strain Relief Clamp Flexible Boot Label Coaxial contact ■Coaxial contact Cable Dia. Part Number CL No. 4mm MQ138-CM(4.0) CL206-0891-7 4.8mm MQ138-CM(4.8) CL206-0684-2 5.2mm MQ138-CM(5.2) CL206-0664-5 ■Label Applicable cable Part Number CL No. Coaxial/signal combined cable MS-138-C(P)-1 CL358-0088-3 Part Number CL No. 1.5D-2W MS-138-C(P)-1 CL358-0100-7 MQ138-M-LABEL CL206-0769-3 0.8D-2W MS-138-C(P)-2 CL358-0101-0 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 4 The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.