Arrays Feature •Reducing SMD surface area (40% reduced). •Reducing SMD costs (75% reduced). •Both flow and reflow soldering are applicable. •Convex & concave type. The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception. Application •For semiconductor devices. •For computers, digital circuits. Structure and Dimensions (1) CONVEX TERMINAL TYPE •4 Array •2 Array A T D A T 123 W W B B P L P L G G (UNIT: mm) Type L W T A D B G P Average Weight RP102P RP104P RP164P 1.00±0.10 2.00±0.10 3.20±0.10 1.00±0.10 1.00±0.10 1.60±0.10 0.35±0.10 0.35±0.10 0.50±0.10 0.33±0.05 0.30±0.15 0.40±0.15 0.40±0.15 0.60±0.15 0.20±0.10 0.15±0.10 0.30±0.15 0.25±0.10 0.25±0.15 0.30±0.15 0.65±0.10 0.50±0.15 0.80±0.15 1.1㎎ 2.2㎎ 8.9㎎ (2) CONCAVE TERMINAL TYPE •2 Array •4 Array T A T A B B (Top side) W W P P L L (Bottom side) G G (UNIT: mm) Type L W T A B G P Average Weight RN102P RN104P 1.00±0.10 2.00±0.10 1.00±0.10 1.00±0.10 0.35±0.10 0.40±0.10 0.30±0.10 0.30±0.10 0.15±0.10 0.15±0.10 0.25±0.15 0.25±0.15 0.5±0.10 0.5±0.10 1.2㎎ 2.8㎎ Parts Numbering System •The part number system shall be in the following format RN 16 4P J 100 Code Designation Dimension Resistors Tolerance Resistance Value 10: 1005 16: 1608 2P: 2 Pieces 4P: 4 Pieces RP: Convex type array RN: Concave type array J: ±5% ※Jumper:’ J’ FS Packaging Code 3 digit coding system (IEC coding system) E-24 series CS : Tape Packaging 7" ES : Tape Packaging 10" AS : Tape Packaging 13" Example of Land Pattern Design Specification Type Power Rating (W) 102P, 104P 162P, 164P 1/16 •Rated voltage (V) = Operation Notes Working Overload Voltage Voltage (MAX) (MAX) 25(V) 50(V) TCR (ppm/℃) Resistance Range (Ω) ±200ppm ±200ppm 1Ω~1MΩ 50(V) 100(V) Rated Rated Working Ambient Temperature Temperature 70℃ -55℃~+125℃ Recommended Soldering Conditions General Structure √ Rated power(W)×Normal resistance value (R) Rated voltage should be lower than (MAX) working voltage. General Power Derating Curve The rated power is the maximum continuous loading power at 70℃ ambient temperature. For ambient temperature above 70℃, the loading power follows the below power derating curve. (The load current shall be derated according to Derating curve in case of the 'Jumper') Precision Low Ohms Percentage of the rated dissipation(%) 100 80 Ultra Low Ohms 60 Operation area 40 Arrays 20 0 -55 70 -40 0 40 125 Arrays for Memory Modules 80 120 Ambient Temperature(℃) Attenuator Jumper Resistors Type Resistance Current Rating Rated Ambient Temperature Rated Working Temperature 102P, 104P 162P, 164P 50mΩMax. 1.0(A) 70℃ -55℃~+125℃ Characteristics Performance Packaging Marking Standard Resistance Value •3 digits indication(E-24 series) - Left 2 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 103 Left 2 digit: 10 Last 1 digits: 3 103 = 10×10 3 =10000Ω=10kΩ 103 ※Jumper chip is printed as “000”. •RP102P, RN102P, RN104P type : No marking. The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before you ordering. 16 17 Arrays for Memory Modules Feature •Reducing SMD surface area (40% reduced). •Reducing SMD costs (75% reduced). •Applicable both flow and reflow soldering. •Reverse & Short free Reverse Concave Type. The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception. Application •For semiconductor devices. •For computers, digital circuits. Structure and Dimensions (1) REVERSE CONCAVE TYPE <Side View> <Top View> <Bottom View> B G 150 W P A T L (UNIT: mm) Type L W T A B G P Average Weight RM102P RM104P 1.00±0.10 2.00±0.10 1.00±0.10 1.00±0.10 0.35±0.10 0.45±0.10 0.30±0.10 0.30±0.10 0.15±0.10 0.15±0.10 0.25±0.15 0.25±0.15 0.50±0.10 0.50±0.10 1.2㎎ 2.8㎎ (2) SHORT-FREE REVERSE CONCAVE TYPE <Top View> <Side View> <Bottom View> <Terminal Side View> G 150 W H P T A A T L (UNIT: mm) Type L W T A G P H Average Weight RK102P RK104P 1.00±0.10 2.00±0.10 1.00±0.10 1.00±0.10 0.35±0.10 0.45±0.10 0.30±0.10 0.30±0.10 0.25±0.15 0.25±0.15 0.50±0.10 0.50±0.10 0.17min 0.3min 1.2㎎ 2.8㎎ Parts Numbering System •The part number system shall be in the following format RM 10 4P J 100 Code Designation Dimension Resistors Tolerance Resistance Value RM : Reverse Concave Array RK : Short-free Reverse Concave Array 10: 1005 16: 1608 2P: 2 Pieces 4P: 4 Pieces J: ±5% ※Jumper:’ J’ CS Packaging Code 3 digit coding system (IEC coding system) E-24 series CS : Tape Packaging 7" ES : Tape Packaging 10" AS : Tape Packaging 13" Example of Land Pattern Design Specification Type Power Rating (W) 102P, 104P 1/16 •Rated voltage (V) = Operation Notes Working Overload Voltage Voltage (MAX) (MAX) 25(V) TCR (ppm/℃) Resistance Range (Ω) ±200ppm 1Ω~1MΩ 50(V) Rated Rated Working Ambient Temperature Temperature 70℃ -55℃~+125℃ Recommended Soldering Conditions General Structure √ Rated power(W)×Normal resistance value (R) Rated voltage should be lower than (MAX) working voltage. General Power Derating Curve The rated power is the maximum continuous loading power at 70℃ ambient temperature. For ambient temperature above 70℃, the loading power follows the below power derating curve. (The load current shall be derated according to Derating curve in case of the 'Jumper') Precision Low Ohms Percentage of the rated dissipation(%) 100 80 Ultra Low Ohms 60 Operation area 40 Arrays 20 0 -55 70 -40 0 40 125 Arrays for Memory Modules 80 120 Ambient Temperature(℃) Attenuator Jumper Resistors Type Resistance Current Rating Rated Ambient Temperature Rated Working Temperature 102P, 104P 50mΩMax. 1.0(A) 70℃ -55℃~+125℃ Characteristics Performance Packaging Marking Standard Resistance Value •3 digits indication(E-24 series) - Left 2 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 150 Left 2 digit: 15 Last 1 digits: 0 150 = 15×10 0=15Ω 150 ※Jumper chip is printed as “000”. •RM102P, RK102P Type : No marking. The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before you ordering. 18 19