Staggered Connector Directly Mounted on Board HIF2C Series ■ Features 1. Directly Mounted on Board This connector can be directly mounted on the board using 1.27mm pitch flat cable. 2. Variation in Number of Contacts The number of contacts contains 10, 16, 20, 26, 30, 34, 40, 50, and 60 contacts. 3. Low Profile Type The connector height is lower than that of the HIF2E series. 4. Applicable Cable The applicable cable is UL2651 AWG#28 flat cable (7 cores./0.127mm, jacket dia. :0.8 to 1.0mm). ■ Applications Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc. ■ Product Specifications Rating Current rating: 1A Voltage rating: 200V AC Item Operating Temperature Range:–55 to +85ç (Note 1) Operating Moisture Range:40 to 80% Storage Temperature Range:–10 to +60ç(Note 2) Storage Humidity Range:40 to 70% (Note 2) Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1µs or more 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle No damage, cracks, or parts looseness. (–65ç: 30 minutes ➝15 to 35ç: 5 minutes max. 125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles 7. Resistance to Flow: 260ç for 10 seconds Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■ Material Part Insulator Contact Material PBT Finish Remarks UL94V-0 Black Contact area Connection area Beryllium copper Gold plated Tin plated --------------- ■ Ordering Information HIF2C - * DT - 1.27 R (S) 1 2 3 4 5 6 1 Series Name: HIF 2C 4 Contact Pitch: 1.27mm 2 Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60 5 Connection type : R : ribbon cable 3 Contact alignment: DT : staggered 6 S : Tin plating B61 Part Number B62 CL No. HIF2C-10DT-1.27R 561-0075-0 HIF2C-10DT-1.27RS 561-0076-3 HIF2C-16DT-1.27R 561-0077-6 HIF2C-16DT-1.27RS 561-0078-9 HIF2C-20DT-1.27R 561-0079-1 HIF2C-20DT-1.27RS 561-0080-0 HIF2C-26DT-1.27R 561-0081-3 HIF2C-26DT-1.27RS 561-0082-6 HIF2C-30DT-1.27R 561-0083-9 HIF2C-30DT-1.27RS 561-0084-1 HIF2C-34DT-1.27R 561-0085-4 HIF2C-34DT-1.27RS 561-0086-7 HIF2C-40DT-1.27R 561-0087-0 HIF2C-40DT-1.27RS 561-0088-2 HIF2C-50DT-1.27R 561-0089-5 HIF2C-50DT-1.27RS 561-0090-4 HIF2C-60DT-1.27R 561-0091-7 HIF2C-60DT-1.27RS 561-0092-0 Number of Contacts A B 10 17.8 11.43 16 25.4 19.05 20 30.5 24.13 26 38.1 31.75 30 43.2 36.83 34 48.3 41.91 40 55.9 49.53 50 68.6 62.23 60 81.3 74.93 BPCB mounting pattern 10 contacts 16 contacts 20 contacts 26 contacts 30 contacts B63 BPCB mounting pattern 34 contacts 40 contacts 50 contacts 60 contacts B64