Non-reflective Terminations (SMA Type) HRM-TM Series ■Features 1.High Performance HRM-TMP-2 These super wide bandwidth/ultra high matching non-reflective termination use Hirose Electric original high frequency matching technology. 2.Equipped with SMA Connectors HRM-TMP-5-2 HRM-TMP-05 HRM-TMP-10-2 HRM-601D Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. HRM-602 HRM-601• HRM-601A(02) HRM-603 ■Product Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) DC to 26.5 GHz 50 ohms 0.25 to 10 W Operating temperature range Operating relative humidity -10ç to +65ç 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item Standard 1.Vibration No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions 2.Shock Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis 3.Temperature cycle No damage, cracks, or parts dislocation Temperature: -55ç → +5ç to +35ç → +85ç → +5ç to +35ç Time: 30 → 15 max. → 30 → 15 max. (Minutes) 200 cycles ●The test method conforms to MIL-STD-202. ●Please see the specification items for details concerning the VSWR. ■Materials Part Material Connector Body (Note) Stainless steel Finish Nickel plating Insulation PTFE ---------- Male contacts Brass Gold plating Female contacts Beryllium copper Gold plating Outer conductor Brass Nickel plating Coupling (Note) Stainless steel Passivated Radiator Aluminum Black alumite Resistor Metal film ---------- Note: The external cladding and coupling of HRM-601, HRM-602, and HRM-603 have received gold plating processing. 58 Conditions ■Ordering Information HRM - 601 S 1 2 HRM - TM P - 5 - 2 3 1 2 3 4 1 Series Name: HRM Series 1 Series Name: HRM Series 2 600 to 699: Indicates a non-reflective termination. 2 TM: Indicates a non-reflective terminator. 3 Coupling Finish 3 Connector type Blank: Gold plating P: Plug type S: Passivated J: Jack type 5 4 Power (Example) 05: 0.5 W 2: 2 W 5 Suffix A: Passivated (HRM-601S type without cap) D: Passivated (With connection leads) ■Specifications Part Number HRM-601 DC~2GHz 2~4GHz 4~8GHz 8~12.4GHz 12.4~18GHz 18~26.5GHz Power (W) Connectors Weight (g) 1.08 1.10 1.12 1.15 ---------- 1/4 HRM-P 3 HRM-601A DC~18 1.08 1.10 1.12 1.15 ---------- 1/4 HRM-P 3 HRM-601A(02) DC~26.5 1.08 1.10 1.12 1.15 1.20 1/4 HRM-P 3 HRM-601D DC~18 1.08 1.10 1.12 1.15 ---------- 1/4 HRM-P 3 DC~18 1.08 1.35 ---------- 1/4 HRM-J 4 DC~18 1.08 ---------- 1/4 HRM-P 5 HRM-602 HRM-602S HRM-603 HRM-603S ∆! V.S.W.R.(Max) DC~18 HRM-601S ∆! Frequency Range (GHz) 1.15 1.10 1.12 1.15 HRM-TMP-05 DC~18 1.10 1.12 1.15 ---------- 1/2 HRM-P 3 HRM-TMP-2 DC~18 1.10 1.15 1.20 1.25 1.25 ---------- 2 HRM-P 11 HRM-TMP-3 DC~8 1.10 1.15 1.20 ---------- ---------- 3 HRM-P 40 HRM-TMP-5-2 DC~18 ---------- 5 HRM-P 42 HRM-TMP-6 DC~8 ---------- 6 HRM-P 56 HRM-TMP-10-2 DC~18 ---------- 10 HRM-P 82 1.08 1.20 1.10 1.15 1.20 ---------1.30 1.20 ---------- ---------1.30 Note 1: When 300 metal plates are attached Note 2: When connection leads are to be attached to the jack connector side, please use a leading dimension of 6.6 mm or greater from the mounting surface. ∆! CAUTION: Beryllia is used in this product. Please follow associated laws when disposing. ■Typical Data 59 ■External Dimensions (NOTE: Mounting screw hole) (NOTE: Mounting screw hole) 60