Ei16C552 Dual FIFO UART and Parallel Port FEATURES DESCRIPTION • IBM PC AT™ and PS/2™ compatible • Dual channel version of Ei16C550 with Centronics printer interface • Independent control of transmit, receive, line status and data set interrupts on each channel • Programmable serial interface characteristics for each channel: -5, 6, 7 or 8 bit characters -Even, odd or no parity bit generation and dectection The Ei16C552 is an enhanced dual channel version of the Ei16C550 Universal Asynchronous Receiver Transmitter (UART). The device serves two serial input/output interfaces simultaneously in microcomputer or microprocessor based systems. Each channel performs a serial-to-parallel conversion on data characters received from peripheral devices or modems, and a parallel-to-serial conversion on data characters transmitted by the CPU. The complete status of each channel of the dual UART can be read at any time during functional operation by the CPU. The information obtained includes the type and condition of the transfer operations being performed, and error conditions. In addition to its dual communications interface capabilities, the Ei16C552 provides the user with a fully bidirectional parallel data port that fully supports the parallel Centronics type printer. The parallel port, together with the two serial ports, provide IBM PC AT™ and PS2 compatible computers with a single device to serve the three system ports. -1, 1.5 or 2 stop bit generation • Programmable baud rate generator divides CLK input by a divisor between 1 and (216 -1) • Tri-State® TTL drive capability for bidirectional data bus and control bus on each channel • 16 byte FIFO for receiver as well as for trans mitter. • Advanced CMOS low power technology with single 5 volt supply Part Numbers May Be Marked With "IMP" or "Ei." 9 8 7 6 5 4 3 2 1 68 67 66 65 64 63 62 61 RXRDY0• RSLD1• GND RI1• DSR1• CLK CS1• GND LPTOE• ACK• PE BUSY SLCT VCC ERR• SIN1 RXRDY1• PIN CONFIGURATION Ei16C552-CJ68 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 INT1 INT2 SLIN• INIT• AFD• STB• GND PD0 PD1 PD2 PD3 PD4 PD5 PD6 PD7 INT0 BD0 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 GND CTS0• RSLD0• RI0• DSR0• CS0 A2 A1 A0 IOW• IOR• CS2• RESET• VCC SIN0 TXRDY1• INTSLC SOUT1 DTR1• RTS1• CTS1• DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 TXRDY0• VCC RTS0• DTR0• SOUT0 5 For additional information, contact IMP, Inc. at 408.432.9100 or visit www.impweb.com IMP, Inc. acquired Epic products on January 26, 2001. (see press release at http://www.impweb.com/PRESS/PR012601.htm) Ei16C552 NOTES ON PIN DESCRIPTION: 1) Pin 4 and Pin 2 can be used by external crystal oscillator in future versions 2) Pin 23 and Pin 43 can be used as OUT20• and OUT21• respectively in future versions ORDERING INFORMATION Ei16C552-CJ68 68 Pin PLCC package LIFE SUPPORT POLICY: Epic products are not to be used in life support devices without prior written authorization. Epic Semiconductor Inc. retains the right to make changes these specifications at any time, without notice. Tri-state® is a Registered Trademark of National Semiconductor,Inc. IBM PC AT™ and PS2 are Trademark s of International Business Machines. BLOCK DIAGRAM CTS0• DSDR0• RLSD0• R10• SIN0 CS0• UART #1 8 DB0-DB7 RTS0• DTR0• SOUT0 INT0 TXRDY0• RXRDY0* 8 CTS1• DSR1• RLSD1• RI1• SIN1 CS1• A0-A2 IOW• IOR• RESET• RTS1• DTR1• SOUT1 INT1 TXRDY1• RXRDY1• UART #2 3 SELECT AND CONTROL • BDO 8 LOGIC CLK 8 ERR• SLCT BUSY PE ACK• PARALLEL PORT PD0-PD7 INIT• AFD• STB• SLIN• INT2 LPTOE• 6 CS2• For additional information, contact IMP, Inc. at 408.432.9100 or visit www.impweb.com IMP, Inc. acquired Epic products on January 26, 2001. (see press release at http://www.impweb.com/PRESS/PR012601.htm)