ispLSI 3256E ® In-System Programmable High Density PLD Functional Block Diagram G3 H0 A0 A1 OR Array A2 A3 ORP ORP • IN-SYSTEM PROGRAMMABLE — 5V In-System Programmable (ISP™) using Lattice ISP or Boundary Scan Test (IEEE 1149.1) Protocol — Increased Manufacturing Yields, Reduced Time-toMarket, and Improved Product Quality — Reprogram Soldered Devices for Faster Debugging B1 G0 Boundary Scan F3 D Q F2 D Q F1 Twin GLB D Q Array ORP G1 D Q D Q OR B0 G2 F0 D Q E3 D Q E2 D Q B2 E1 Global Routing Pool B3 E0 C0 C1 ORP C2 C3 ORP ORP ORP ORP H1 AND Array ORP ORP • HIGH PERFORMANCE E2CMOS® TECHNOLOGY — fmax = 100 MHz Maximum Operating Frequency — tpd = 10 ns Propagation Delay — TTL Compatible Inputs and Outputs — Electrically Erasable and Reprogrammable — Non-Volatile — 100% Tested at Time of Manufacture — Unused Product Term Shutdown Saves Power H2 ORP ORP H3 D0 D1 ORP D2 ORP • HIGH-DENSITY PROGRAMMABLE LOGIC — 256 I/O Pins — 12000 PLD Gates — 512 Registers — High Speed Global Interconnect — Wide Input Gating for Fast Counters, State Machines, Address Decoders, etc. — Small Logic Block Size for Random Logic ORP Features D3 ORP 0139A/3256E • 100% IEEE 1149.1 BOUNDARY SCAN COMPATIBLE Description • OFFERS THE EASE OF USE AND FAST SYSTEM SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY OF FIELD PROGRAMMABLE GATE ARRAYS — Complete Programmable Device Can Combine Glue Logic and Structured Designs — Five Dedicated Clock Input Pins — Synchronous and Asynchronous Clocks — Programmable Output Slew Rate Control to Minimize Switching Noise — Flexible Pin Placement — Optimized Global Routing Pool Provides Global Interconnectivity The ispLSI 3256E is a High Density Programmable Logic Device containing 512 Registers, 256 Universal I/O pins, five Dedicated Clock Input Pins, 16 Output Routing Pools (ORP) and a Global Routing Pool (GRP) which allows complete inter-connectivity between all of these elements. The ispLSI 3256E features 5V in-system programmability and in-system diagnostic capabilities. The ispLSI 3256E offers non-volatile reprogrammability of the logic, as well as the interconnect to provide truly reconfigurable systems. • ispDesignEXPERT™ – LOGIC COMPILER AND COMPLETE ISP DEVICE DESIGN SYSTEMS FROM HDL SYNTHESIS THROUGH IN-SYSTEM PROGRAMMING — Superior Quality of Results — Tightly Integrated with Leading CAE Vendor Tools — Productivity Enhancing Timing Analyzer, Explore Tools, Timing Simulator and ispANALYZER™ — PC and UNIX Platforms The basic unit of logic on the ispLSI 3256E device is the Twin Generic Logic Block (Twin GLB) labelled A0, A1...H3. There are a total of 32 Twin GLBs in the ispLSI 3256E device. Each Twin GLB has 24 inputs, a programmable AND array and two OR/Exclusive-OR Arrays and eight outputs which can be configured to be either combinatorial or registered. All Twin GLB inputs come from the GRP. Copyright © 2002 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com 3256e_08 1 June 2002 Specifications ispLSI 3256E Functional Block Diagram I/O 48 I/O 50 I/O 52 I/O 54 I/O 57 I/O 59 I/O 61 I/O 63 I/O 56 I/O 58 I/O 60 I/O 62 I/O 231 I/O 229 I/O 227 I/O 225 I/O 223 I/O 221 I/O 219 I/O 217 I/O 215 I/O 213 I/O 211 I/O 209 I/O 207 I/O 205 I/O 203 I/O 201 I/O 199 I/O 197 I/O 195 I/O 193 I/O 230 I/O 228 I/O 226 I/O 224 I/O 222 I/O 220 I/O 218 I/O 216 I/O 214 I/O 212 I/O 210 I/O 208 I/O 206 I/O 204 I/O 202 I/O 200 I/O 198 I/O 196 I/O 194 I/O 192 I/O 174 I/O 172 I/O 170 I/O 168 I/O 175 I/O 173 I/O 171 I/O 169 F0 I/O 166 I/O 164 I/O 162 I/O 160 I/O 167 I/O 165 I/O 163 I/O 161 B0 E3 I/O 158 I/O 156 I/O 154 I/O 152 I/O 159 I/O 157 I/O 155 I/O 153 B1 E2 I/O 150 I/O 148 I/O 146 I/O 144 I/O 151 I/O 149 I/O 147 I/O 145 B2 E1 I/O 142 I/O 140 I/O 138 I/O 136 I/O 143 I/O 141 I/O 139 I/O 137 B3 E0 I/O 134 I/O 132 I/O 130 I/O 128 I/O 135 I/O 133 I/O 131 I/O 129 A2 F1 A3 Input Bus I/O 49 I/O 51 I/O 53 I/O 55 I/O 183 I/O 181 I/O 179 I/O 177 F2 Global Routing Pool (GRP) C1 C0 Megablock C2 ORP C3 D1 D0 D2 ORP ORP Input Bus Input Bus I/O 40 I/O 42 I/O 44 I/O 46 I/O 182 I/O 180 I/O 178 I/O 176 A1 ORP I/O 41 I/O 43 I/O 45 I/O 47 I/O 191 I/O 189 I/O 187 I/O 185 F3 ORP I/O 32 I/O 34 I/O 36 I/O 38 TDO/SDO ORP I/O 33 I/O 35 I/O 37 I/O 39 TRST I/O 190 I/O 188 I/O 186 I/O 184 A0 ORP I/O 24 I/O 26 I/O 28 I/O 30 G0 D3 ORP Input Bus CLK 0 CLK 1 CLK 2 IOCLK 1 IOCLK 0 I/O 25 I/O 27 I/O 29 I/O 31 G1 ORP I/O 16 I/O 18 I/O 20 I/O 22 G2 G3 TDI/SDI ISP and Boundary Scan TAP ORP I/O 17 I/O 19 I/O 21 I/O 23 H0 ORP I/O 8 I/O 10 I/O 12 I/O 14 Input Bus I/O 9 I/O 11 I/O 13 I/O 15 H1 ORP ORP I/O 0 I/O 2 I/O 4 I/O 6 Input Bus I/O 1 I/O 3 I/O 5 I/O 7 Input Bus ORP ORP H2 H3 TMS/MODE I/O 239 I/O 237 I/O 235 I/O 233 I/O 238 I/O 236 I/O 234 I/O 232 ORP TCLK/SCLK I/O 247 I/O 245 I/O 243 I/O 241 I/O 246 I/O 244 I/O 242 I/O 240 Input Bus Generic Logic Blocks BSCAN/ispEN I/O 255 I/O 253 I/O 251 I/O 249 I/O 254 I/O 252 I/O 250 I/O 248 GOE0 TOE GOE1 Figure 1. ispLSI 3256E Functional Block Diagram 2 I/O 120 I/O 122 I/O 124 I/O 126 I/O 121 I/O 123 I/O 125 I/O 127 Y0 Y1 Y2 Y3 Y4 I/O 112 I/O 114 I/O 116 I/O 118 I/O 113 I/O 115 I/O 117 I/O 119 I/O 88 I/O 90 I/O 92 I/O 94 I/O 89 I/O 91 I/O 93 I/O 95 I/O 104 I/O 106 I/O 108 I/O 110 I/O 80 I/O 82 I/O 84 I/O 86 I/O 81 I/O 83 I/O 85 I/O 87 I/O 105 I/O 107 I/O 109 I/O 111 I/O 72 I/O 74 I/O 76 I/O 78 I/O 73 I/O 75 I/O 77 I/O 79 I/O 97 I/O 96 I/O 99 I/O 98 I/O 101 I/O 100 I/O 103 I/O 102 I/O 64 I/O 66 I/O 68 I/O 70 I/O 65 I/O 67 I/O 69 I/O 71 RESET 0139isp/3256E Specifications ispLSI 3256E Description (continued) All local logic block outputs are brought back into the GRP so they can be connected to the inputs of any other logic block on the device. The device also has 256 I/O cells, each of which is directly connected to an I/O pin. Each I/O cell can be individually programmed to be a combinatorial input, a registered input, a latched input, an output or a bidirectional I/O pin with 3-state control. The signal levels are TTL compatible voltages and the output drivers can source 4 mA or sink 8 mA. Each output can be programmed independently for fast or slow output slew rate to minimize overall output switching noise. Clocks in the ispLSI 3256E device are provided through five dedicated clock pins. The five pins provide three clocks to the Twin GLBs and two clocks to the I/O cells. The table below lists key attributes of the device along with the number of resources available. An additional feature of the ispLSI 3256E is its Boundary Scan capability, which is composed of cells connected between the on-chip system logic and the device’s input and output pins. All I/O pins have associated boundary scan registers, with 3-state I/O using three boundary scan registers and inputs using one. The 256 I/O Cells are grouped into 16 sets of 16 bits. Pairs of these I/O groups are associated with a logic Megablock through the use of the ORP. Each Megablock is able to provide one Product Term Output Enable (PTOE) signal which is globally distributed to all I/O cells. That PTOE signal can be generated within any GLB in the Megablock. Each I/O cell can select either a Global OE or a PTOE. The ispLSI 3256E supports all IEEE 1149.1 mandatory instructions, which include BYPASS, EXTEST and SAMPLE. Key Attributes of the ispLSI 3256E Attribute Four Twin GLBs, 32 I/O Cells and two ORPs are connected together to make a logic Megablock. The Megablock is defined by the resources that it shares. The outputs of the four Twin GLBs are connected to a set of 32 I/O cells by the ORP. The ispLSI 3256E device contains eight of these Megablocks. The GRP has as its inputs the outputs from all of the Twin GLBs and all of the inputs from the bidirectional I/O cells. All of these signals are made available to the inputs of the Twin GLBs. Delays through the GRP have been equalized to minimize timing skew and logic glitching. Quantity Twin GLBs 32 Registers 512 I/O Pins 256 Global Clocks 5 Global OE 2 Test OE 1 Table - 003/3256E 3 Specifications ispLSI 3256E Absolute Maximum Ratings 1 Supply Voltage Vcc ........................................................................... -0.5 to +7.0V Input Voltage Applied ........................................................................ -2.5 to VCC +1.0V Off-State Output Voltage Applied ..................................................... -2.5 to VCC +1.0V Storage Temperature ........................................................................ -65 to 150°C Case Temp. with Power Applied ...................................................... -55 to 125°C Max. Junction Temp. (TJ) with Power Applied (304-Pin PQFP) ...... 150°C Max. Junction Temp. (TJ) with Power Applied (320-Ball BGA) ........ 140°C 1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional operation of the device at these or at any other conditions above those indicated in the operational sections of this specification is not implied (while programming, follow the programming specifications). DC Recommended Operating Condition PARAMETER SYMBOL TA VCC VIL VIH Ambient Temperature Supply Voltage MIN. MAX. UNITS 0 70 °C 4.75 5.25 V V Input Low Voltage 0 0.8 Input High Voltage 2.0 VCC +1 V Table 2-0005/3256E Capacitance (TA=25°C,f=1.0 MHz) TYPICAL UNITS I/O Capacitance 10 pf VCC = 5.0V, VI/O = 2.0V Clock Capacitance 15 pf VCC = 5.0V, VY = 2.0V SYMBOL C1 C2 PARAMETER TEST CONDITIONS Table 2-0006/3256E Data Retention Specifications PARAMETER MINIMUM MAXIMUM 20 – Years 10000 – Cycles Data Retention ispLSI Erase/Reprogram Cycles UNITS Table 2-0008/3256E 4 Specifications ispLSI 3256E Switching Test Conditions Input Pulse Levels Figure 2. Test Load GND to 3.0V Input Rise and Fall Time ≤ 3ns 10% to 90% Input Timing Reference Levels 1.5V Output Timing Reference Levels 1.5V Output Load 3-state levels are measured 0.5V from steady-state active level. + 5V R1 See Figure 2 Table 2-0003/3256E Device Output Test Point R2 CL* Output Load conditions (See Figure 2) *CL includes Test Fixture and Probe Capacitance. TEST CONDITION A B C R1 R2 CL 470Ω 390Ω 35pF 0213A Active High ∞ 390Ω 35pF Active Low 470Ω 390Ω 35pF Active High to Z at VOH -0.5V ∞ 390Ω 5pF Active Low to Z at VOL +0.5V 470Ω 390Ω 5pF Table 2 - 0004A DC Electrical Characteristics Over Recommended Operating Conditions SYMBOL CONDITION 3 MIN. TYP. IOL= 8 mA – – Output High Voltage IOH = -4 mA 2.4 – – V Input or I/O Low Leakage Current 0V ≤ VIN ≤ VIL (Max.) – – -10 µA Input or I/O High Leakage Current 3.5V ≤ VIN ≤ VCC – – 10 µA Bscan/ispEN Input Low Leakage Current 0V ≤ VIN ≤ VIL – – -150 µA I/O Active Pull-Up Current 0V ≤ VIN ≤ VIL – – -150 µA PARAMETER MAX. UNITS VOL VOH IIL IIH IIL-isp IIL-PU IOS1 Output Low Voltage Output Short Circuit Current VCC = 5V, VOUT = 0.5V – – -200 mA ICC2,4 Operating Power Supply Current VIL = 0.0V, VIH = 3.0V fTOGGLE = 1 MHz – 300 – mA 0.4 V Table 2 - 0007isp/3256E 1. One output at a time for a maximum duration of one second. VOUT = 0.5V was selected to avoid test problems by tester ground degradation. Characterized but not 100% tested. 2. Measured using sixteen 16-bit counters. 3. Typical values are at VCC = 5V and TA = 25°C. 4. Maximum ICC varies widely with specific device configuration and operating frequency. Refer to the Power Consumption section of this datasheet and Thermal Management section of the Lattice Semiconductor Data Book or CD-ROM to estimate maximum ICC. 5 Specifications ispLSI 3256E External Switching Characteristics1, 2, 3 Over Recommended Operating Conditions PARAMETER TEST5 COND. #2 -100 DESCRIPTION1 -70 MIN. MAX. MIN. MAX. UNITS tpd1 A 1 Data Prop. Delay, 4PT Bypass, ORP Bypass — 10.0 — 15.0 ns tpd2 A 2 Data Propagation Delay — 13.0 — 18.0 ns fmax A 3 Clock Frequency with Internal Feedback 100 — 70.0 — MHz fmax (Ext.) — 4 Clock Freq. with Ext. Feedback,1/(tsu2 + tco1) 77.0 — 50.0 — MHz 3 fmax (Tog.) — 5 Clock Frequency, Max Toggle 100 — 83.0 — MHz tsu1 — 6 GLB Reg. Setup Time before Clock, 4PT bypass 5.5 — 9.0 — ns tco1 A 7 GLB Reg. Clock to Output Delay, ORP bypass — 6.5 — 9.0 ns th1 — 8 GLB Reg. Hold Time after Clock, 4PT bypass 0.0 — 0.0 — ns tsu2 — 9 GLB Reg. Setup Time before Clock 6.5 — 11.0 — ns tco2 — 10 GLB Reg. Clock to Output Delay — 7.0 — 10.0 ns th2 — 11 GLB Reg. Hold Time after Clock 0.0 — 0.0 — ns tr1 A 12 Ext. Reset Pin to Output Delay — 13.5 — 15.0 ns trw1 — 13 Ext. Reset Pulse Duration 6.5 — 12.0 — ns tptoeen B 14 Input to Output Enable — 16.0 — 19.0 ns tptoedis C 15 Input to Output Disable — 16.0 — 19.0 ns tgoeen B 16 Global OE Output Enable — 9.0 — 12.0 ns tgoedis C 17 Global OE Output Disable — 9.0 — 12.0 ns ttoeen — 18 Test OE Output Enable — 12.0 — 15.0 ns 4 ttoedis — 19 Test OE Output Disable — 12.0 — 15.0 ns twh — 20 Ext. Sync. Clock Pulse Duration, High 5.0 — 6.0 — ns twl — 21 Ext. Sync. Clock Pulse Duration, Low 5.0 — 6.0 — ns tsu3 — 22 I/O Reg. Setup Time before Ext. Sync. Clock (Y3, Y4) 4.5 — 5.0 — ns th3 — 23 I/O Reg. Hold Time after Ext. Sync. Clock (Y3, Y4) 0.0 — 0.0 — ns 1. 2. 3. 4. 5. Unless noted otherwise, all parameters use 20 PTXOR path and ORP. Refer to Timing Model in this data sheet for further details. Standard 16-bit counter using GRP feedback. fmax (Toggle) may be less than 1/(twh + twl). This is to allow for a clock duty cycle of other than 50%. Reference Switching Test Conditions section. Timing Ext.3256E.eps 6 Specifications ispLSI 3256E Internal Timing Parameters1 Over Recommended Operating Conditions PARAMETER #2 -100 DESCRIPTION MIN. -70 MAX. MIN. MAX. UNITS Inputs tiobp tiolat tiosu tioh tioco tior 24 I/O Register Bypass — 2.4 — 4.0 ns 25 I/O Latch Delay — 10.3 — 14.0 ns 26 I/O Register Setup Time before Clock 4.8 — 5.8 — ns 27 I/O Register Hold Time after Clock -1.6 — -2.5 — ns 28 I/O Register Clock to Out Delay — 5.8 — 8.5 ns 29 I/O Register Reset to Out Delay — 5.8 — 7.5 ns 30 GRP Delay — 2.3 — 3.2 ns 31 4 Product Term Bypass Path Delay (Comb.) — 3.2 — 3.6 ns GRP tgrp GLB t4ptbp t4ptbr t1ptxor t20ptxor txoradj tgbp tgsu tgh tgco tgro tptre tptoe tptck ORP torp torpbp 32 4 Product Term Bypass Path Delay (Reg.) — 3.1 — 4.8 ns 33 1 Product Term/XOR Path Delay — 4.0 — 5.1 ns 34 20 Product Term/XOR Path Delay — 4.1 — 5.2 ns 35 XOR Adjacent Path Delay3 — 4.3 — 5.7 ns 36 GLB Register Bypass Delay — 1.5 — 1.6 ns 37 GLB Register Setup Time before Clock 0.3 — 1.2 — ns 38 GLB Register Hold Time after Clock 5.0 — 7.6 — ns 39 GLB Register Clock to Output Delay — 1.6 — 3.0 ns 40 GLB Register Reset to Output Delay — 5.2 — 5.2 ns 41 GLB Product Term Reset to Register Delay — 4.0 — 4.4 ns 42 GLB Product Term Output Enable to I/O Cell Delay — 6.5 — 6.9 ns 43 GLB Product Term Clock Delay 3.0 3.6 3.4 4.2 ns 44 ORP Delay — 1.2 — 1.9 ns 45 ORP Bypass Delay — 0.7 — 0.9 ns 1. Internal Timing Parameters are not tested and are for reference only. 2. Refer to Timing Model in this data sheet for further details. 3. The XOR adjacent path can only be used by hard macros. Timing Int.3256E.eps 7 Specifications ispLSI 3256E Internal Timing Parameters1 Over Recommended Operating Conditions PARAMETER #2 -100 DESCRIPTION -70 UNITS MIN. MAX. MIN. MAX. — 3.3 ns Outputs tob 46 Output Buffer Delay — 2.6 tobs 47 Output Buffer Delay, Slew Limited Adder — 17.6 — 18.3 ns toen 48 I/O Cell OE to Output Enabled — 5.5 — 5.7 ns todis 49 I/O Cell OE to Output Disabled — 5.5 — 5.7 ns Clocks tgy0/1/2 50 Clock Delay, Y0 or Y1 or Y2 to Global GLB Clk Line 1.6 1.6 1.8 1.8 ns tioy3/4 51 Clock Delay, Y3 or Y4 to I/O Cell Global Clock Line 0.3 1.6 0.8 2.5 ns tgr 52 Global Reset to GLB and I/O Registers — 4.5 — 4.6 ns tgoe 53 Global OE Pad Buffer — 5.9 — 7.5 ns ttoe 54 Test OE Pad Buffer — 6.1 — 8.9 ns Global Reset 1. Internal Timing Parameters are not tested and are for reference only. 2. Refer to Timing Model in this data sheet for further details. Timing Int.2.3256E.eps 8 Specifications ispLSI 3256E ispLSI 3256E Timing Model I/O Cell GRP GLB ORP I/O Cell Feedback #31 I/O Reg Bypass I/O Pin (Input) #24 #52 GRP #30 Input D Register Q RST #25 - 29 4 PT Bypass GLB Reg Bypass ORP Bypass #32 #36 #45 20 PT XOR Delays GLB Reg Delay ORP Delay D #33 - 35 Q #44 RST #52 Reset Y3,4 #37 - 40 #51 Control RE PTs OE #41 - 43 CK #50 Y0,1,2 #53 GOE0,1 #54 TOE 0902/3256E Derivations of tsu, th and tco from the Product Term Clock 1 tsu = = = 1.4 ns = Logic + Reg su - Clock (min) (tiobp + tgrp + t20ptxor) + (tgsu) - (tiobp + tgrp + tptck(min)) (#24+ #30+ #34) + (#37) - (#24+ #30+ #43) (2.4 + 2.3 + 4.1) + (0.3) - (2.4 + 2.3 + 3.0) th = = = 4.5 ns = Clock (max) + Reg h - Logic (tiobp + tgrp + tptck(max)) + (tgh) - (tiobp + tgrp + t20ptxor) (#24+ #30+ #43) + (#38) - (#24+ #30+ #34) (2.4 + 2.3 + 3.6) + (5.0) - (2.4 + 2.3 + 4.1) tco = = = 13.7 ns = Clock (max) + Reg co + Output (tiobp + tgrp + tptck(max)) + (tgco) + (torp + tob) (#24 + #30 + #43) + (#39) + (#44 + #46) (2.4 + 2.3 + 3.6) + (1.6) + (1.2 + 2.6) Table 2- 0042-3256E Note: Calculations are based upon timing specifications for the ispLSI 3256E-100L. 9 #46, 47 #48, 49 I/O Pin (Output) Specifications ispLSI 3256E Power Consumption Power consumption in the ispLSI 3256E device depends on two primary factors: the speed at which the device is operating and the number of product terms used. Figure 3 shows the relationship between power and operating speed. Figure 3. Typical Device Power Consumption vs fmax ispLSI 3256E 600 ICC (mA) 500 400 300 200 0 20 40 60 80 100 fmax (MHz) Notes: Configuration of 16 16-bit Counters Typical Current at 5V, 25° C ICC can be estimated for the ispLSI 3256E using the following equation: ICC = 60 + (# of PTs * 0.48) + (# of nets * Max. freq * 0.0106) where: # of PTs = Number of Product Terms used in design # of nets = Number of Signals used in device Max. freq = Highest Clock Frequency to the device The ICC estimate is based on typical conditions (VCC = 5.0V, room temperature) and an assumption of two GLB loads on average exists. These values are for estimates only. Since the value of ICC is sensitive to operating conditions and the program in the device, the actual ICC should be verified. 0127/3256E 10 Specifications ispLSI 3256E Pin Description I/O Pin Name Description Input/Output pins – These are the general purpose I/O pins used by the logic array. GOE0, GOE1 Global Output Enable input pins. TOE Test Output Enable pin – This pin tristates all I/O pins when a logic low is driven. RESET Active Low (0) Reset pin – Resets all of the GLB and I/O registers in the device. Y0, Y1, Y2 Dedicated Clock inputs. These clock inputs are connected to one of the clock inputs of all the GLBs on the device. Y3, Y4 Dedicated Clock inputs. These clock inputs are connected to one of the clock inputs of all the I/O cells on the device. BSCAN/ispEN Input – Dedicated in-system programming enable input pin. When this pin is high, the BSCAN TAP controller pins TMS, TDI, TDO and TCK are enabled. When this pin is brought low, the ISP State Machine control pins MODE, SDI, SDO and SCLK are enabled. High-to-low transition of this pin will put the device in the programming mode and put all I/O pins in the high-Z state. TDI/SDI Input – This pin performs two functions. It is the Test Data input pin when ispEN is logic high. When ispEN is logic low, it functions as an input pin to load programming data into the device. SDI is also used as one of the two control pins for the ISP State Machine. TCK/SCLK Input – This pin performs two functions. It is the Test Clock input pin when ispEN is logic high. When ispEN is logic low, it functions as a clock pin for the Serial Shift Register. TMS/MODE Input – This pin performs two functions. It is the Test Mode Select input pin when ispEN is logic high. When ispEN is logic low, it functions as a pin to control the operation of the ISP State Machine. TRST/NC1 Input – Test Reset, active low to reset the Boundary Scan State Machine. TDO/SDO Output – This pin performs two functions. When ispEN is logic low, it functions as the pin to read the ISP data. When ispEN is high, it functions as Test Data Out. GND Ground (GND) VCC Vcc NC1 No Connect. 1. NC pins are not to be connected to any active signals, VCC or GND. Pin Locations Signal 304-Pin PQFP 320-Ball BGA GOE0, GOE1 195, 185 AD11, AC14 TOE 215 AC6 RESET 53 A17 Y0, Y1, Y2, Y3, Y4 43, 33, 205, 175, 165 A14, B11, AD8, AB16, AA18 ispEN/BSCAN 63 B19 SDI/TDI 23 C9 SCLK/TCK 73 D20 MODE/TMS 13 D7 TRST/NC1 225 AA5 SDO/TDO 155 AB21 GND 9, 19, 39, 49, 69, 85, 95, 115, 125, 145, 161, 171, 191, 201, 221, 237, 247, 267, 277, 297 D6, C8, B13, A16, D19, F21, H22, N23, T24, W21, AA19, AB17, AC12, AD9, AA6, W4, U3, M2, J1, F4 VCC 1, 29, 59, 77, 105, 135, 153, 181, 211, 229, 257, 287, 304 D4, B10, B18, D21, K23, V23, AA21, AC15, AC7, AA4, R2, G2, C3 NC1 A1, A2, A23, A24, B1, B2, B23, B24, AC1, AC2, AC23, AC24, AD1, AD2, AD23, AD24 1. NC pins are not to be connected to any active signals, VCC or GND. 11 Specifications ispLSI 3256E I/O Locations Signal PQFP BGA Signal PQFP BGA I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 I/O 8 I/O 9 I/O 10 I/O 11 I/O 12 I/O 13 I/O 14 I/O 15 I/O 16 I/O 17 I/O 18 I/O 19 I/O 20 I/O 21 I/O 22 I/O 23 I/O 24 I/O 25 I/O 26 I/O 27 I/O 28 I/O 29 I/O 30 I/O 31 I/O 32 I/O 33 I/O 34 I/O 35 I/O 36 I/O 37 I/O 38 I/O 39 I/O 40 I/O 41 I/O 42 I/O 43 I/O 44 I/O 45 I/O 46 I/O 47 I/O 48 I/O 49 I/O 50 I/O 51 I/O 52 40 41 42 44 45 46 47 48 50 51 52 54 55 56 57 58 60 61 62 64 65 66 67 68 70 71 72 74 75 76 78 79 80 81 82 83 84 86 87 88 89 90 91 92 93 94 96 97 98 99 100 101 102 C13 D13 A13 B14 C14 D14 A15 B15 C15 D15 B16 C16 B17 D16 A18 C17 A19 D17 C18 A20 D18 C19 B20 A21 C20 B21 A22 C21 B22 C22 C23 D22 C24 E21 D23 E22 D24 E23 F22 E24 G21 F23 G22 F24 H21 G23 G24 J21 H23 J22 H24 J23 K21 I/O 53 I/O 54 I/O 55 I/O 56 I/O 57 I/O 58 I/O 59 I/O 60 I/O 61 I/O 62 I/O 63 I/O 64 I/O 65 I/O 66 I/O 67 I/O 68 I/O 69 I/O 70 I/O 71 I/O 72 I/O 73 I/O 74 I/O 75 I/O 76 I/O 77 I/O 78 I/O 79 I/O 80 I/O 81 I/O 82 I/O 83 I/O 84 I/O 85 I/O 86 I/O 87 I/O 88 I/O 89 I/O 90 I/O 91 I/O 92 I/O 93 I/O 94 I/O 95 I/O 96 I/O 97 I/O 98 I/O 99 I/O 100 I/O 101 I/O 102 I/O 103 I/O 104 I/O 105 103 104 106 107 108 109 110 111 112 113 114 116 117 118 119 120 121 122 123 124 126 127 128 129 130 131 132 133 134 136 137 138 139 140 141 142 143 144 146 147 148 149 150 151 152 154 156 157 158 159 160 162 163 K22 J24 K24 L21 L22 L23 L24 M24 M21 M22 M23 N22 N21 N24 P24 P23 P22 P21 R24 R23 R22 R21 T23 U24 T22 U23 T21 V24 U22 W24 U21 V22 W23 Y24 V21 W22 Y23 AA24 Y22 AA23 AB24 Y21 AA22 AB23 AB22 AC22 AD22 AA20 AC21 AB20 AD21 AC20 AB19 Signal I/O 106 I/O 107 I/O 108 I/O 109 I/O 110 I/O 111 I/O 112 I/O 113 I/O 114 I/O 115 I/O 116 I/O 117 I/O 118 I/O 119 I/O 120 I/O 121 I/O 122 I/O 123 I/O 124 I/O 125 I/O 126 I/O 127 I/O 128 I/O 129 I/O 130 I/O 131 I/O 132 I/O 133 I/O 134 I/O 135 I/O 136 I/O 137 I/O 138 I/O 139 I/O 140 I/O 141 I/O 142 I/O 143 I/O 144 I/O 145 I/O 146 I/O 147 I/O 148 I/O 149 I/O 150 I/O 151 I/O 152 I/O 153 I/O 154 I/O 155 I/O 156 I/O 157 I/O 158 PQFP BGA 164 166 167 168 169 170 172 173 174 176 177 178 179 180 182 183 184 186 187 188 189 190 192 193 194 196 197 198 199 200 202 203 204 206 207 208 209 210 212 213 214 216 217 218 219 220 222 223 224 226 227 228 230 12 AD20 AC19 AB18 AD19 AA17 AC18 AD18 AA16 AC17 AD17 AC16 AA15 AB15 AD16 AD15 AA14 AB14 AD14 AD13 AA13 AB13 AC13 AB12 AA12 AD12 AC11 AB11 AA11 AD10 AC10 AB10 AA10 AC9 AB9 AC8 AA9 AD7 AB8 AD6 AA8 AB7 AD5 AA7 AB6 AC5 AD4 AB5 AC4 AD3 AB4 AC3 AB3 AB2 Signal PQFP I/O 159 I/O 160 I/O 161 I/O 162 I/O 163 I/O 164 I/O 165 I/O 166 I/O 167 I/O 168 I/O 169 I/O 170 I/O 171 I/O 172 I/O 173 I/O 174 I/O 175 I/O 176 I/O 177 I/O 178 I/O 179 I/O 180 I/O 181 I/O 182 I/O 183 I/O 184 I/O 185 I/O 186 I/O 187 I/O 188 I/O 189 I/O 190 I/O 191 I/O 192 I/O 193 I/O 194 I/O 195 I/O 196 I/O 197 I/O 198 I/O 199 I/O 200 I/O 201 I/O 202 I/O 203 I/O 204 I/O 205 I/O 206 I/O 207 I/O 208 I/O 209 I/O 210 I/O 211 231 232 233 234 235 236 238 239 240 241 242 243 244 245 246 248 249 250 251 252 253 254 255 256 258 259 260 261 262 263 264 265 266 268 269 270 271 272 273 274 275 276 278 279 280 281 282 283 284 285 286 288 289 BGA AA3 AB1 Y4 AA2 Y3 AA1 Y2 W3 Y1 V4 W2 V3 W1 U4 V2 V1 T4 U2 T3 U1 T2 R4 R3 T1 R1 P4 P3 P2 P1 N1 N4 N3 N2 M3 M4 M1 L1 L2 L3 L4 K1 K2 K3 K4 J2 H1 J3 H2 J4 G1 H3 F1 H4 Signal PQFP I/O 212 I/O 213 I/O 214 I/O 215 I/O 216 I/O 217 I/O 218 I/O 219 I/O 220 I/O 221 I/O 222 I/O 223 I/O 224 I/O 225 I/O 226 I/O 227 I/O 228 I/O 229 I/O 230 I/O 231 I/O 232 I/O 233 I/O 234 I/O 235 I/O 236 I/O 237 I/O 238 I/O 239 I/O 240 I/O 241 I/O 242 I/O 243 I/O 244 I/O 245 I/O 246 I/O 247 I/O 248 I/O 249 I/O 250 I/O 251 I/O 252 I/O 253 I/O 254 I/O 255 290 291 292 293 294 295 296 298 299 300 301 302 303 2 3 4 5 6 7 8 10 11 12 14 15 16 17 18 20 21 22 24 25 26 27 28 30 31 32 34 35 36 37 38 BGA G3 F2 E1 G4 F3 E2 D1 E3 D2 C1 E4 D3 C2 B3 C4 A3 D5 B4 C5 A4 B5 C6 A5 B6 C7 A6 D8 B7 A7 D9 B8 A8 B9 D10 C10 A9 A10 D11 C11 A11 A12 D12 C12 B12 Specifications ispLSI 3256E Pin Configuration 304 303 302 301 300 299 298 297 296 295 294 293 292 291 290 289 288 287 286 285 284 283 282 281 280 279 278 277 276 275 274 273 272 271 270 269 268 267 266 265 264 263 262 261 260 259 258 257 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 VCC I/O 224 I/O 223 I/O 222 I/O 221 I/O 220 I/O 219 GND I/O 218 I/O 217 I/O 216 I/O 215 I/O 214 I/O 213 I/O 212 I/O 211 I/O 210 VCC I/O 209 I/O 208 I/O 207 I/O 206 I/O 205 I/O 204 I/O 203 I/O 202 I/O 201 GND I/O 200 I/O 199 I/O 198 I/O 197 I/O 196 I/O 195 I/O 194 I/O 193 I/O 192 GND I/O 191 I/O 190 I/O 189 I/O 188 I/O 187 I/O 186 I/O 185 I/O 184 I/O 183 VCC I/O 182 I/O 181 I/O 180 I/O 179 I/O 178 I/O 177 I/O 176 I/O 175 I/O 174 GND I/O 173 I/O 172 I/O 171 I/O 170 I/O 169 I/O 168 I/O 167 I/O 166 I/O 165 GND I/O 164 I/O 163 I/O 162 I/O 161 I/O 160 I/O 159 I/O 158 VCC ispLSI 3256E 304-Pin PQFP Pinout Diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 ispLSI 3256E Top View I/O 157 I/O 156 I/O 155 TRST/NC1 I/O 154 I/O 153 I/O 152 GND I/O 151 I/O 150 I/O 149 I/O 148 I/O 147 TOE I/O 146 I/O 145 I/O 144 VCC I/O 143 I/O 142 I/O 141 I/O 140 I/O 139 Y2 I/O 138 I/O 137 I/O 136 GND I/O 135 I/O 134 I/O 133 I/O 132 I/O 131 GOE0 I/O 130 I/O 129 I/O 128 GND I/O 127 I/O 126 I/O 125 I/O 124 I/O 123 GOE1 I/O 122 I/O 121 I/O 120 VCC I/O 119 I/O 118 I/O 117 I/O 116 I/O 115 Y3 I/O 114 I/O 113 I/O 112 GND I/O 111 I/O 110 I/O 109 I/O 108 I/O 107 Y4 I/O 106 I/O 105 I/O 104 GND I/O 103 I/O 102 I/O 101 I/O 100 I/O 99 SDO/TDO I/O 98 VCC VCC I/O 30 I/O 31 I/O 32 I/O 33 I/O 34 I/O 35 I/O 36 GND I/O 37 I/O 38 I/O 39 I/O 40 I/O 41 I/O 42 I/O 43 I/O 44 I/O 45 GND I/O 46 I/O 47 I/O 48 I/O 49 I/O 50 I/O 51 I/O 52 I/O 53 I/O 54 VCC I/O 55 I/O 56 I/O 57 I/O 58 I/O 59 I/O 60 I/O 61 I/O 62 I/O 63 GND I/O 64 I/O 65 I/O 66 I/O 67 I/O 68 I/O 69 I/O 70 I/O 71 I/O 72 GND I/O 73 I/O 74 I/O 75 I/O 76 I/O 77 I/O 78 I/O 79 I/O 80 I/O 81 VCC I/O 82 I/O 83 I/O 84 I/O 85 I/O 86 I/O 87 I/O 88 I/O 89 I/O 90 GND I/O 91 I/O 92 I/O 93 I/O 94 I/O 95 I/O 96 I/O 97 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 VCC I/O 225 I/O 226 I/O 227 I/O 228 I/O 229 I/O 230 I/O 231 GND I/O 232 I/O 233 I/O 234 MODE/TMS I/O 235 I/O 236 I/O 237 I/O 238 I/O 239 GND I/O 240 I/O 241 I/O 242 SDI/TDI I/O 243 I/O 244 I/O 245 I/O 246 I/O 247 VCC I/O 248 I/O 249 I/O 250 Y1 I/O 251 I/O 252 I/O 253 I/O 254 I/O 255 GND I/O 0 I/O 1 I/O 2 Y0 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 GND I/O 8 I/O 9 I/O 10 RESET I/O 11 I/O 12 I/O 13 I/O 14 I/O 15 VCC I/O 16 I/O 17 I/O 18 ispEN/BSCAN I/O 19 I/O 20 I/O 21 I/O 22 I/O 23 GND I/O 24 I/O 25 I/O 26 SCLK/TCK I/O 27 I/O 28 I/O 29 304MQFP.3256E 1. NC pins are not to be connected to any active signals, VCC or GND. 13 Specifications ispLSI 3256E Signal Configuration ispLSI 3256E 320-Ball BGA Signal Diagram 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 8 7 6 5 4 3 2 1 A NC1 NC1 I/O 26 I/O 23 I/O 19 I/O 16 I/O 14 RESET GND I/O 6 Y0 I/O 252 I/O 251 I/O 248 I/O 247 I/O 243 I/O 240 I/O 237 I/O 234 I/O 231 I/O 227 NC1 NC1 A B NC1 NC1 I/O 28 I/O 25 I/O 22 ispEN/ BSCAN VCC I/O 12 I/O 10 I/O 7 I/O 3 I/O GND 255 Y1 I/O VCC 244 I/O 242 I/O 239 I/O 235 I/O 232 I/O 229 I/O 225 NC1 NC1 C I/O 32 I/O 30 I/O 29 I/O 27 I/O 24 I/O 21 I/O 18 I/O 15 I/O 11 I/O 8 I/O 4 I/O 0 B I/O 254 I/O 250 I/O 246 SDI/ I/O TDI GND 236 I/O 233 I/O 230 I/O 226 VCC I/O 224 I/O 221 C D I/O 36 I/O 34 I/O 31 VCC SCLK/ TCK GND I/O 20 I/O 17 I/O 13 I/O 9 I/O 5 I/O 1 I/O 253 I/O 249 I/O 245 I/O 241 I/O I/O GND 228 VCC 223 I/O 220 I/O 218 E I/O 39 I/O 37 I/O 35 I/O 33 I/O 222 D I/O 219 I/O 217 I/O 214 E F I/O 43 I/O 41 I/O 38 GND GND I/O 216 I/O 213 I/O 210 G I/O 46 I/O 45 I/O 42 F I/O 40 I/O 215 I/O 212 I/O VCC 208 H I/O 50 I/O 48 G GND I/O 44 I/O 211 I/O 209 I/O 206 I/O 204 J I/O 54 H I/O 51 I/O 49 I/O 47 I/O 207 I/O 205 I/O 203 GND J K I/O 55 VCC I/O 53 I/O 52 I/O 202 I/O 201 I/O 200 I/O 199 K L I/O 59 I/O 58 I/O 57 I/O 56 I/O 198 I/O 197 I/O 196 I/O 195 L M I/O 60 I/O 63 I/O 62 I/O 61 ispLSI 3256E I/O 193 I/O I/O 192 GND 194 M N I/O 66 GND I/O 64 I/O 65 Bottom View I/O 189 I/O 190 I/O 191 I/O 188 N P I/O 67 I/O 68 I/O 69 I/O 70 I/O 184 I/O 185 I/O 186 I/O 187 P R I/O 71 I/O 72 I/O 73 I/O 74 I/O 180 I/O 181 I/O VCC 183 R T GND I/O 75 I/O 77 I/O 79 I/O 175 I/O 177 I/O 179 I/O 182 T U I/O 76 I/O 78 I/O 81 I/O 83 I/O I/O 172 GND 176 I/O 178 U V I/O 80 VCC I/O 84 I/O 87 I/O 168 W I/O 82 I/O 85 I/O 88 GND Y I/O 86 I/O 89 I/O 91 I/O 94 AA I/O 90 I/O 92 I/O 95 AB I/O 93 I/O 96 I/O SDO/ I/O 97 TDO 102 I/O 101 I/O 103 AC NC1 NC1 I/O 98 AD NC1 NC1 I/O 99 I/O VCC 100 GND I/O 2 9 I/O 238 MODE/ TMS I/O 170 I/O 173 I/O 174 V I/O GND 166 I/O 169 I/O 171 W I/O 161 I/O 163 I/O 165 I/O 167 Y I/O VCC 159 I/O 162 I/O 164 AA I/O 110 I/O 113 I/O 117 I/O 121 I/O 125 I/O 129 I/O 133 I/O 137 I/O 141 I/O 145 I/O 148 GND I/O 105 I/O GND 108 Y3 I/O 118 I/O 122 I/O 126 I/O 128 I/O 132 I/O 136 I/O 139 I/O 143 I/O 146 I/O 152 I/O 155 I/O 157 I/O 158 I/O 160 AB I/O 104 I/O 107 I/O 111 I/O 114 GOE I/O I/O I/O 1 116 VCC 127 GND 131 I/O 135 I/O 138 I/O I/O 140 VCC TOE 150 I/O 153 I/O 156 NC1 NC1 AC I/O 106 I/O 109 I/O 112 I/O 115 I/O 119 AD Y4 I/O 120 I/O 123 I/O 124 I/O GOE I/O 130 0 134 GND 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 1. NC pins are not to be connected to any active signals, VCC or GND. Note: Ball A1 indicator dot on top side of package. 14 9 I/O 149 TRST/ NC1 Y2 I/O 142 I/O 144 I/O 147 I/O 151 I/O 154 NC1 NC1 8 7 6 5 4 3 2 1 Specifications ispLSI 3256E Part Number Description ispLSI 3256E – XXX X XXXX X Device Family Grade Blank = Commercial Device Number Package P = PQFP B320 = BGA Speed 100 = 100 MHz fmax 70 = 70 MHz fmax Power L = Low 0212/3256E Ordering Information COMMERCIAL FAMILY ispLSI fmax (MHz) tpd (ns) ORDERING NUMBER PACKAGE 100 10 ispLSI 3256E-100LQ 304-Pin PQFP 100 10 ispLSI 3256E-100LB320 320-Ball BGA 70 15 ispLSI 3256E-70LQ 304-Pin PQFP 70 15 ispLSI 3256E-70LB320 320-Ball BGA Table 2-0041/3256E 15