LATTICE ISPLSI5384VA

ispLSI 5384VA
®
In-System Programmable
3.3V SuperWIDE™ High Density PLD
— Superior Quality of Results
— Tightly Integrated with Leading CAE Vendor Tools
— Productivity Enhancing Timing Analyzer, Explore
Tools, Timing Simulator and ispANALYZER™
— PC and UNIX Platforms
Features
• SuperWIDE HIGH-DENSITY IN-SYSTEM
PROGRAMMABLE LOGIC
— 3.3V Power Supply
— User Selectable 3.3V/2.5V I/O
— 18,000 PLD Gates / 384 Macrocells
— Up to 288 I/O Pins
— 384 Registers
— High-Speed Global Interconnect
— SuperWIDE 32 Generic Logic Block (GLB) Size for
Optimum Performance
— SuperWIDE Input Gating (68 Inputs) for Fast
Counters, State Machines, Address Decoders, etc.
— PCB Efficient Ball Grid Array (BGA) Package
Options
— Interfaces with Standard 5V TTL Devices
Generic
Logic Block
Generic
Logic Block
Input Bus
Input Bus
Input Bus
Input Bus
Generic
Logic Block
Input Bus
Generic
Logic Block
Input Bus
Generic
Logic Block
Input Bus
Global Routing Pool
(GRP)
Boundary
Scan
Interface
Input Bus
Generic
Logic Block
Input Bus
Generic
Logic Block
Generic
Logic Block
• 100% IEEE 1149.1 BOUNDARY SCAN TESTABLE AND
3.3V IN-SYSTEM PROGRAMMABLE
Input Bus
Generic
Logic Block
Generic
Logic Block
• IN-SYSTEM PROGRAMMABLE
— Increased Manufacturing Yields, Reduced Time-toMarket, and Improved Product Quality
— Reprogram Soldered Devices for Faster Debugging
Input Bus
Generic
Logic Block
Generic
Logic Block
• HIGH PERFORMANCE E2CMOS® TECHNOLOGY
— fmax = 125 MHz Maximum Operating Frequency
— tpd = 7.5 ns Propagation Delay
— Enhanced tsu2 = 7 ns, tsu3 (CLK0/1) = 4.5ns,
tsu3 (CLK2/3) = 3.5ns
— TTL/3.3V/2.5V Compatible Input Thresholds and
Output Levels
— Electrically Erasable and Reprogrammable
— Non-Volatile
— Programmable Speed/Power Logic Path
Optimization
Input Bus
Functional Block Diagram
ispLSI 5000V Description
The ispLSI 5000V Family of In-System Programmable
High Density Logic Devices is based on Generic Logic
Blocks (GLBs) of 32 registered macrocells and a single
Global Routing Pool (GRP) structure interconnecting the
GLBs.
• ARCHITECTURE FEATURES
— Enhanced Pin-Locking Architecture with SingleLevel Global Routing Pool and SuperWIDE GLBs
— Wrap Around Product Term Sharing Array Supports
up to 35 Product Terms Per Macrocell
— Macrocells Support Concurrent Combinatorial and
Registered Functions
— Macrocell Registers Feature Multiple Control
Options Including Set, Reset and Clock Enable
— Four Dedicated Clock Input Pins Plus Macrocell
Product Term Clocks
— Slew and Skew Programmable I/O (SASPI/O™)
Supports Programmable Bus Hold, Pull-up, Open
Drain and Slew and Skew Rate Options
— Six Global Output Enable Terms, Two Global OE
Pins and One Product Term OE per Macrocell
Outputs from the GLBs drive the Global Routing Pool
(GRP) between the GLBs. Switching resources are provided to allow signals in the Global Routing Pool to drive
any or all the GLBs in the device. This mechanism allows
fast, efficient connections across the entire device.
Each GLB contains 32 macrocells and a fully populated,
programmable AND-array with 160 logic product terms
and five extra control product terms. The GLB has 68
inputs from the Global Routing Pool which are available
in both true and complement form for every product term.
• ispDesignEXPERT™ – LOGIC COMPILER AND COMPLETE ISP DEVICE DESIGN SYSTEMS FROM HDL
SYNTHESIS THROUGH IN-SYSTEM PROGRAMMING
Copyright © 2000 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
5384va_04
1
September 2000
Specifications ispLSI 5384VA
Functional Block Diagram
TMS
TCK
I/O 219
I/O 218
I/O 217
I/O 216
I/O 239
I/O 238
I/O 237
I/O 236
Generic
Logic Block
Generic
Logic Block
Input Bus
Input Bus
Input Bus
Generic
Logic Block
Generic
Logic Block
Generic
Logic Block
Generic
Logic Block
Input Bus
Input Bus
Input Bus
1. CLK2, CLK3 and TOE signals are multiplexed with I/O signals. Which I/O is multiplexed is
determined by the package type used – see table below.
Package Type
208 PQFP
208 fpBGA
272 BGA
388 BGA
I/O 89 / CLK2
I/O 89 / CLK2
I/O 119 / CLK2
I/O 179 / CLK2
Multplexed Signals
I/O 98 / CLK3
I/O 98 / CLK3
I/O 131 / CLK3
I/O 197 / CLK3
2
I/O 0 / TOE
I/O 0 / TOE
I/O 0 / TOE
I/O 0 / TOE
1CLK 2
1CLK 3
CLK 0
CLK 1
I/O 140
I/O 141
I/O 142
I/O 143
I/O 120
I/O 121
I/O 122
I/O 123
I/O 116
I/O 117
I/O 118
I/O 119
I/O 96
I/O 97
I/O 98
I/O 99
I/O 92
I/O 93
I/O 94
I/O 95
I/O 72
I/O 73
I/O 74
I/O 75
GSET/GRESET
Input Bus
I/O 68
I/O 69
I/O 70
I/O 71
Generic
Logic Block
I/O 48
I/O 49
I/O 50
I/O 51
Global Routing Pool
(GRP)
Input Bus
I/O 44
I/O 45
I/O 46
I/O 47
Generic
Logic Block
I/O 24
I/O 25
I/O 26
I/O 27
Generic
Logic Block
Boundary
Scan
Interface
Input Bus
I/O 20
I/O 21
I/O 22
I/O 23
Generic
Logic Block
Generic
Logic Block
Input Bus
Generic
Logic Block
1I/O 0 / TOE
I/O 1
I/O 2
I/O 3
I/O 243
I/O 242
I/O 241
I/O 240
Input Bus
Input Bus
VCCIO
I/O 263
I/O 262
I/O 261
I/O 260
I/O 267
I/O 266
I/O 265
I/O 264
I/O 287
I/O 286
I/O 285
I/O 284
GOE1
GOE0
Figure 1. ispLSI 5384VA Functional Block Diagram (388 BGA Option)
TDI
TDO
I/O 215
I/O 214
I/O 213
I/O 212
I/O 195
I/O 194
I/O 193
I/O 192
I/O 191
I/O 190
I/O 189
I/O 188
I/O 171
I/O 170
I/O 169
I/O 168
I/O 167
I/O 166
I/O 165
I/O 164
I/O 147
I/O 146
I/O 145
I/O 144
Specifications ispLSI 5384VA
a separate VCCIO reference input which is independent
of the main VCC supply for the device. This feature allows
the output drivers to drive either 3.3V or 2.5V output
levels while the device logic and the output current drive
is always powered from 3.3V. The output drivers also
provide individually programmable edge rates and open
drain capability. A programmable pullup resistor is provided to tie off unused inputs and a programmable
bus-hold latch is available to hold tristate outputs in their
last valid state until the bus is driven again by some
device.
ispLSI 5000V Description (Continued)
The 160 product terms are grouped in 32 sets of five and
sent into a Product Term Sharing Array (PTSA) which
allows sharing up to a maximum of 35 product terms for
a single function. Alternatively, the PTSA can be bypassed for functions of five product terms or less. The
five extra product terms are used for shared GLB controls, set, reset, clock, clock enable and output enable.
The 32 registered macrocells in the GLB are driven by the
32 outputs from the PTSA or the PTSA bypass. Each
macrocell contains a programmable XOR gate, a programmable register/latch/toggle flip-flop and the
necessary clocks and control logic to allow combinatorial
or registered operation. The macrocells each have two
outputs, which can be fed back through the Global
Routing Pool. This dual output capability from the
macrocell allows efficient use of the hardware resources.
One output can be a registered function for example,
while the other output can be an unrelated combinatorial
function. A direct register input from the I/O pad facilitates efficient use of this feature to construct high-speed
input registers.
The ispLSI 5000V Family features 3.3V, non-volatile insystem programmability for both the logic and the
interconnect structures, providing the means to develop
truly reconfigurable systems. Programming is achieved
through the industry standard IEEE 1149.1-compliant
Boundary Scan interface. Boundary Scan test is also
supported through the same interface.
An enhanced, multiple cell security scheme is provided
that prevents reading of the JEDEC programming file
when secured. After the device has been secured using
this mechanism, the only way to clear the security is to
execute a bulk-erase instruction.
Macrocell registers can be clocked from one of several
global or product term clocks available on the device. A
global and product term clock enable is also provided,
eliminating the need to gate the clock to the macrocell
registers. Reset and preset for the macrocell register is
provided from both global and product term signals. The
macrocell register can be programmed to operate as a Dtype register, a D-type latch or a T-type flip flop.
ispLSI 5000V Family Members
The ispLSI 5000V Family ranges from 256 macrocells to
512 macrocells and operates from a 3.3V power supply.
All family members will be available with multiple package options. The ispLSI 5000VA Family device matrix
showing the various bondout options is shown in the table
below.
The 32 outputs from the GLB can drive both the Global
Routing Pool and the device I/O cells. The Global Routing
Pool contains one line from each macrocell output and
one line from each I/O pin.
The interconnect structure (GRP) is very similar to Lattice’s
existing ispLSI 1000, 2000 and 3000 families, but with an
enhanced interconnect structure for optimal pin locking
and logic routing. This eliminates the need for registered
I/O cells or an Output Routing Pool.
The input buffer threshold has programmable TTL/3.3V/
2.5V compatible levels. The output driver can source
4mA and sink 8mA in 3.3V mode. The output drivers have
Table 1. ispLSI 5000VA Family
Package Type
Device
GLBs
Macrocells
208 fpBGA
208 PQFP
272 BGA
388 BGA
ispLSI 5256VA
8
256
144 I/O
144 I/O
192 I/O
—
ispLSI 5384VA
12
384
144 I/O
144 I/O
192 I/O
288 I/O
ispLSI 5512VA
16
512
—
144 I/O
192 I/O
288 I/O
3
Specifications ispLSI 5384VA
Figure 2. ispLSI 5384VA Block Diagram (288 I/O Version)
24
I/O
24
24
32
32
32
24
32
Q
D
D
5
160
160
CLK2
24
24
32
32
32
24
32
Q
160
24
24
32
32
32
32
Q
160
160
Q
24
24
32
32
160
160
Q
24
24
32
32
160
160
Q
24
24
32
32
5
5
24
I/O
TOE
32
D
D
160
5
PT
24
68
32
32
32
5
PT
160
PT
68
24
Q
160
160
PT
24
I/O
24
I/O
D
160
5
5
32
D
5
PT
24
68
32
32
32
5
PT
160
PT
68
24
Q
160
160
PT
24
I/O
24
I/O
D
672
160
5
5
32
D
5
PT
24
68
32
32
32
5
PT
160
PT
68
24
Q
160
160
PT
24
I/O
24
I/O
D
160
5
5
32
D
5
PT
24
68
68
24
32
5
PT
160
PT
160
CLK3
Q
160
160
PT
24
I/O
Buffers/Pins
24
I/O
D
160
5
5
32
D
5
PT
Generic
Logic
Block
(GLB)
24
68
68
24
I/O
32
5
PT
160
PT
160
PT
5
PT
Q
160
160
Global
Routing
Pool
(GRP)
24
I/O
32
Q
32
24
160
160
PT
160
PT
160
160
68
68
4
5
PT
5
5384_288
6/10/97
CLK0
CLK1
GOE0
GOE1
SET/RESET
Specifications ispLSI 5384VA
Figure 3. ispLSI 5000V Generic Logic Block (GLB)
From Global Routing Pool
0 1 2
66 67
Global PTOE Bus
PTSA
Macrocell 0
PT 0
PT 1
From PTSA
PTSA bypass
PT 2
To I/O Pad
PTOE
PT Clock
PT Reset
PT Preset
PT 3
PT 4
Shared PT Clock 0
Shared PT (P)reset 0
Shared PT Clock 1
Shared PT (P)reset 1
6
To GRP
Global PTOE 0 ... 5
Macrocell 1
PT 9
PT 8
From PTSA
PTSA bypass
PT 7
To I/O Pad
PTOE
PT Clock
PT Reset
PT Preset
PT 6
PT 5
Shared PT Clock 0
Shared PT (P)reset 0
Shared PT Clock 1
Shared PT (P)reset 1
6
To GRP
Global PTOE 0 ... 5
Macrocell 15
PT 79
PT 78
From PTSA
PTSA bypass
PT 77
To I/O Pad
PTOE
PT Clock
PT Reset
PT Preset
PT 76
PT 75
Shared PT Clock 0
Shared PT (P)reset 0
Shared PT Clock 1
Shared PT (P)reset 1
6
To GRP
Global PTOE 0 ... 5
Macrocell 31
PT 159
PT 158
From PTSA
PTSA bypass
PT 157
To I/O Pad
PTOE
PT Clock
PT Reset
PT Preset
PT 156
PT 155
PT 160
PT 161
Shared PT Clock 0
Shared PT (P)reset 0
PT 162
PT 163
Shared PT Clock 1
Shared PT (P)reset 1
6
PT 164
To GRP
Global PTOE 0 ... 5
GLB_5K
Programmable
AND Array
5
Specifications ispLSI 5384VA
Figure 4. ispLSI 5000V Macrocell
VCCIO
Global PTOE 0
Global PTOE 1
Global PTOE 2
Global PTOE 3
Global PTOE 4
Global PTOE 5
PTOE
VCC
VCCIO
GOE0
GOE1
TOE
PTSA bypass
I/O Pad
Delay
D
PTSA
PT Clock
Q
D/T
Shared PT Clock 0
Shared PT Clock 1
Slew Open
rate drain
2.5V/3.3V
Output
Clk En
To GRP
R/L
CLK0
CLK1
CLK2
CLK3
Clk
R P
PT Reset
D
D Q
Q
SET/RESET
PT Preset
D/T
Clk En
Clk
Shared PT (P)reset 0
Shared PT (P)reset 1
Programmable
Speed/Power
Option
Register/
Latch
R P
6
Specifications ispLSI 5384VA
speed. The clock inversion is available on the remaining
CLK1 - CLK3 signals. By sharing the pins with the I/O
pins, CLK2 and CLK3 can not only be inverted but also is
available for logic implementation through GRP signal
routing. Figure 5 shows these different clock distribution
options.
Global Clock Distribution
The ispLSI 5000V Family has four dedicated clock input
pins: CLK0 - CLK3. CLK0 input is used as the dedicated
master clock that has the lowest internal clock skew with
no clock inversion to maintain the fastest internal clock
Figure 5. ispLSI 5000V Global Clock Structure
CLK 0
CLK0
CLK 1
CLK1
IO/CLK 2
To GRP
CLK2
CLK3
IO/CLK 3
To GRP
GSET/GRST
SET/RESET
7
Specifications ispLSI 5384VA
Figure 6. Boundary Scan Register Circuit for I/O Pins
HIGHZ
EXTEST
SCANIN
(from previous
cell)
BSCAN
Registers
D
Q
TOE
BSCAN
Latches
D
Normal
Function
OE
Q
0
1
EXTEST
PROG_MODE
Normal
Function
Shift DR
D
Q
D
Q
Clock DR
D
0
I/O Pin
1
Q
SCANOUT
(to next cell)
Update DR
Reset
Figure 7. Boundary Scan Register Circuit for Input-Only Pins
Input Pin
SCANIN
(from previous
cell)
D
Shift DR
Clock DR
8
Q
SCANOUT
(to next cell)
Specifications ispLSI 5384VA
Figure 8. Boundary Scan Waveforms and Timing Specifications
TMS
TDI
Tbtsu
Tbtch
Tbth
Tbtcl
Tbtcp
TCK
Tbtvo
Tbtco
TDO
Valid Data
Tbtcpsu
Data to be
captured
Valid Data
Tbtcph
Data Captured
Tbtuov
Tbtuco
Data to be
driven out
SYMBOL
Tbtoz
Valid Data
Tbtuoz
Valid Data
PARAMETER
MIN
MAX UNITS
tbtcp
TCK [BSCAN test] clock pulse width
125
–
ns
tbtch
tbtcl
TCK [BSCAN test] pulse width high
62.5
–
ns
TCK [BSCAN test] pulse width low
62.5
–
ns
tbtsu
TCK [BSCAN test] setup time
25
–
ns
tbth
TCK [BSCAN test] hold time
25
–
ns
trf
TCK [BSCAN test] rise and fall time
50
–
mV/ns
25
ns
tbtco
TAP controller falling edge of clock to valid output
–
tbtoz
TAP controller falling edge of clock to data output disable
–
25
ns
tbtvo
TAP controller falling edge of clock to data output enable
–
25
ns
tbtcpsu
BSCAN test Capture register setup time
25
–
ns
tbtcph
BSCAN test Capture register hold time
25
–
ns
tbtuco
BSCAN test Update reg, falling edge of clock to valid output
–
50
ns
tbtuoz
BSCAN test Update reg, falling edge of clock to output disable
–
50
ns
tbtuov
BSCAN test Update reg, falling edge of clock to output enable
–
50
ns
9
Specifications ispLSI 5384VA
Absolute Maximum Ratings 1, 2
Supply Voltage Vcc .................................. -0.5 to +5.4V
Input Voltage Applied ............................... -0.5 to +5.6V
Tri-Stated Output Voltage Applied ........... -0.5 to +5.6V
Storage Temperature ................................ -65 to 150°C
Case Temp. with Power Applied .............. -55 to 125°C
Max. Junction Temp. (TJ) with Power Applied ... 150°C
1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional
operation of the device at these or at any other conditions above those indicated in the operational sections of this specification
is not implied (while programming, follow the programming specifications).
2. Compliance with the Thermal Management section of the Lattice Semiconductor Data Book or CD-ROM is a requirement.
DC Recommended Operating Condition
SYMBOL
MIN.
MAX.
UNITS
Commercial
TA = 0°C to +70°C
3.00
3.60
V
Industrial
TA = -40°C to +85°C
3.00
3.60
V
2.3
3.60
PARAMETER
VCC
Supply Voltage
VCCIO
I/O Reference Voltage
V
Table 2 - 0005/5384
Capacitance (TA=25°C,f=1.0 MHz)
SYMBOL
C1
C2
C3
PARAMETER
I/O Capacitance
TYPICAL
UNITS
10
pf
TEST CONDITIONS
VCC = 3.3V, VI/O = 2.0V
Clock Capacitance
10
pf
VCC = 3.3V, VCK = 2.0V
Global Input Capacitance
10
pf
VCC = 3.3V, VG = 2.0V
Table 2 - 0006/5384
Erase Reprogram Specification
PARAMETER
ispLSI Erase/Reprogram Cycles
MINIMUM
MAXIMUM
UNITS
10000
–
Cycles
Table 2-0008/3320
10
Specifications ispLSI 5384VA
Switching Test Conditions
Figure 9. Test Load
Input Pulse Levels
GND to VCCIOmin
≤ 1.5ns 10% to 90%
Input Rise and Fall Time
Input Timing Reference Levels
1.5V
Ouput Timing Reference Levels
1.5V
Output Load
VCCIO
R1
See figure
Device
Output
Table 2 - 0003/5384
3-state levels are measured 0.5V from steady-state
active level.
Test
Point
CL*
R2
Output Load Conditions (See figure 8)
3.3V
R1
R2
R1
316Ω
348Ω
511Ω
475Ω 35pF
Active High
∞
348Ω
∞
475Ω 35pF
Active Low
316Ω
∞
511Ω
∞
35pF
Active High to Z
at VOH -0.5V
∞
348Ω
∞
475Ω
5pF
Active Low to Z
at VOL+0.5V
316Ω
∞
511Ω
∞
5pF
∞
∞
∞
∞
35pF
TEST CONDITION
A
B
C
D
*CL includes Test Fixture and Probe Capacitance.
2.5V
Slow Slew
R2
0213D
CL
Table 2 - 0004A/5384
DC Electrical Characteristics for 3.3V Range1
Over Recommended Operating Conditions
SYMBOL
VCCIO
VIL
VIH
VOL
VOH
PARAMETER
CONDITION
MIN.
3.0
–
3.6
V
Input Low Voltage
VOH ≤ VOUT or VOUT ≤ VOL (max)
-0.3
–
0.8
V
Input High Voltage
VOH ≤ VOUT or VOUT ≤ VOL(max)
2.0
–
5.25
V
I/O Reference Voltage
TYP.
MAX. UNITS
Output Low Voltage
IOL = 8 mA
–
–
0.4
V
Output High Voltage
IOH = -4 mA
2.4
–
–
V
Table 2-0007/5384VA
1. I/O voltage configuration must be set to VCC.
11
Specifications ispLSI 5384VA
DC Electrical Characteristics for 2.5V Range1
Over Recommended Operating Conditions
SYMBOL
VCCIO
VIL
VIH
I/O Reference Voltage
VOL
Output Low Voltage
VOH
CONDITION
PARAMETER
MIN.
TYP.
2.3
–
MAX. UNITS
2.7
V
Input Low Voltage
VOH(min) ≤ VOUT or VOUT ≤ VOL(max)
-0.3
–
0.7
V
Input High Voltage
VOH(min) ≤ VOUT or VOUT ≤ VOL(max)
1.7
–
5.25
V
VCCIO=min, VIN=VIH or VIL, IOL= 100µA
–
–
0.2
V
VCCIO=min, VIN=VIH or VIL, IOL= 2mA
Output High Voltage
–
–
0.7
V
VCCIO=min, VIN=VIH or VIL, IOH= -100µA
2.1
–
–
V
VCCIO=min, VIN=VIH or VIL, IOH= -2mA
1.7
–
–
V
2.5V/5384VA
1. I/O voltage configuration must be set to VCCIO.
DC Electrical Characteristics
Over Recommended Operating Conditions
SYMBOL
IIL
IIH
1
IPU
IBHL
IBHH
IBHLO
IBHLH
IBHT
IVCCIO
CONDITION
PARAMETER
MIN.
TYP.
MAX. UNITS
Input or I/O Low Leakage Current
0V ≤ VIN≤ VIL(Max.)
–
–
-10
µA
Input or I/O High Leakage Current
(VCCIO-0.2)V ≤ VIN ≤ VCCIO
–
–
10
µA
VCCIO ≤ VIN ≤ 5.25V
–
–
50
µA
I/O Active Pullup Current
0V ≤ VIN ≤ VIL
–
–
-150
µA
Bus Hold Low Sustaining Current
VIN = VIL(max)
40
–
–
µA
Bus Hold High Sustaining Current
VIN = VIH(min)
0V ≤ VIN ≤ VCCIO
-40
–
–
µA
Bus Hold Low Overdrive Current
–
–
550
µA
Bus Hold High Overdrive Current
0V ≤ VIN ≤ VCCIO
–
–
-550
µA
VIL
–
VIH
V
–
–
45
mA
Bus Hold Trip Points
Current Needed for VCCIO Pin
All I/Os Pulled-up, (Total I/Os * IPUmax)
1. Pullup is capable of pulling to a minimum voltage of VOH under no-load conditions.
12
DC Char_5384VA
Specifications ispLSI 5384VA
External Switching Characteristics
Over Recommended Operating Conditions
PARAM.
TEST3
#
COND.
tpd16
tpd26
fmax
fmax (Ext.)
fmax (Tog.)
tsu1
tco16
th1
tsu2
th2
DESCRIPTION
-125
4,5
-100
-70
MIN. MAX. MIN. MAX. MIN. MAX.
A
1 Data Prop. Delay, 5PT Bypass
A
A
—
4 Clock Freq. with Ext. Feedback,1/(tsu2 + tco1)
—
5 Clock Frequency, Max Toggle2
—
10
—
15
UNITS
—
7.5
ns
2 Data Propagation Delay
—
9.5
—
13
—
19
ns
3 Clock Frequency with Internal Feedback1
125
—
100
—
70
—
MHz
91
—
69
—
45
—
MHz
167
—
125
—
83
—
MHz
—
6 GLB Reg. Setup Time before Clk, 5PT bypass
6
—
8
—
12
—
ns
A
7 GLB Reg. Clock to Output Delay
—
4
—
5.5
—
8
ns
—
8 GLB Reg. Hold Time after Clock, 5PT bypass
0
—
0
—
0
—
ns
—
9 GLB Reg. Setup Time before Clock
7
—
9
—
14
—
ns
—
10 GLB Reg. Hold Time after Clock
0
—
0
—
0
—
ns
tsu3 (CLK0/1)
—
GLB Reg. Setup Time before Clock, Input Reg.
11
Path (CLK0/1)
4.5
—
6
—
9
—
ns
tsu3 (CLK2/3)
—
12
GLB Reg. Setup Time before Clock, Input Reg.
Path (CLK2/3)
3.5
—
5
—
7
—
ns
th3 (CLK0/1)
—
13
GLB Reg. Hold Time after Clock, Input Reg. Path
(CLK0/1)
0
—
0
—
0
—
ns
th3 (CLK2/3)
—
14
GLB Reg. Hold Time after Clock, Input Reg. Path
(CLK2/3)
0
—
0
—
0
—
ns
tr1
trw1
tptoe/dis
tgptoe/dis
tgoe/dis
twh
twl
1.
2.
3.
4.
5.
6.
A
15 Ext. Reset Pin to Output Delay
—
15
—
20
—
30
ns
—
16 Ext. Reset Pulse Duration
7
—
9
—
14
—
ns
B/C
17 Local Product Term Output Enable/Disable
—
9
—
12
—
18
ns
B/C
18 Global Product Term Output Enable/Disable
—
18
—
24
—
30
ns
B/C
19 Global OE Input to Output Enable/Disable
—
6
—
8
—
12
ns
—
20 Ext. Sync. Clock Pulse Duration, High
3
—
4
—
6
—
ns
—
21 Ext. Sync. Clock Pulse Duration, Low
3
—
4
—
6
—
ns
Standard 32-bit counter using GRP feedback.
fmax (Toggle) may be less than 1/(twh + twl). This is to allow for a clock duty cycle of other than 50%.
Reference Switching Test Conditions section.
Unless noted otherwise, all timing numbers are taken with worst case PTSA fanout, a GRP load of 1 GLB, and CLK0.
Timing parameters measured using normal active output driver.
The delay parameters are measured with Vcc as I/O voltage reference. An additional 0.5ns delay is incurred when Vccio is
used as I/O voltage reference.
Timing Ext.5384VA/4.0.eps
13
Specifications ispLSI 5384VA
Internal Timing Parameters1
Over Recommended Operating Conditions
PARAM
-125
-100
-70
MIN MAX MIN MAX MIN MAX
#
DESCRIPTION
22
Input Pad and Buffer, Combinatorial Input
–
0.7
–
0.9
–
1.4
ns
23
Input Pad and Buffer, Registered Input
–
4.7
–
6.6
–
9.7
ns
24
Output Pad and Buffer, Combinatorial Output
–
1.3
–
1.7
–
2.6
ns
25
Output Pad and Buffer, Registered Output
–
1.8
–
2.8
–
4.6
ns
UNIT
I/O Buffer
tidcom
tidreg
todcom
todreg
todz
tslf
tsls
tslfd
tslsd
26
Output Buffer Enable/Disable
–
1.3
–
1.7
–
2.6
ns
27
Slew Rate Adder, Fast Slew
–
0
–
0
–
0
ns
28
Slew Rate Adder, Slow Slew
–
7.5
–
10
–
15
ns
29
Programmable Delay Adder, Fast Slew
–
0.5
–
0.7
–
1
ns
30
Programmable Delay Adder, Slow Slew
–
8
–
10.7
–
16
ns
GLB/Macrocell Delay Register
tmbp
tmlat
tmco
tmsu
tmh
tmsuce
tmhce
tmrst
tftog
31
Macrocell Register/Latch Bypass
–
0
–
0
–
0
ns
32
Macrocell Latch Delay
–
1
–
1.4
–
2
ns
33
Macrocell Register/Latch Clock to Output
–
1
–
1
–
1
ns
34
Macrocell Register/Latch Setup Time
1
–
1.1
–
1.7
–
ns
35
Macrocell Register/Latch Hold Time
2.5
–
3.9
–
5.3
–
ns
36
Macrocell Register/Latch CLKEN Setup Time
1
–
1.4
–
2
–
ns
37
Macrocell Register/Latch CLKEN Hold Time
1
–
1.4
–
2
–
ns
38
Macrocell Register/Latch Set/Reset Time
–
1
–
1.4
–
2
ns
39
Toggle Flip-Flop Feedback
–
1
–
1.3
–
2
ns
40
AND Array, High Speed Mode
–
3
–
4
–
6
ns
41
AND Array, Low Power Mode
–
5
–
6.6
–
10
ns
42
5 Product Term Bypass, Combinatorial
–
1
–
1.4
–
2
ns
43
5 Product Term Bypass, Registered
–
1
–
1.7
–
2.3
ns
44
5 Product Term XOR, Combinatorial
–
2.5
–
3.6
–
5
ns
AND Array
tandhs
tandlp
PTSA
t5ptcom
t5ptreg
t5ptxcom
t5pxtreg
tptsacom
tptsareg
45
5 Product Term XOR, Registered
–
1.5
–
2.2
–
3.3
ns
46
Product Term Sharing Array, Combinatorial
–
3
–
4.1
–
6
ns
47
Product Term Sharing Array, Registered
–
2.0
–
2.7
–
4.3
ns
48
Product Term Clock Delay
–
0.5
–
0.7
–
1
ns
49
Product Term CLKEN Delay
–
1
–
1.4
–
2
ns
50
Shared Product Term CLKEN Delay
–
1
–
1.4
–
2
ns
51
Shared Product Term Clock Delay
–
0.5
–
0.7
–
1
ns
PTSA Controls
tpck
tpcken
tscken
tsck
tptsacken
tsrst
tprst
tpoe
tgpoe
52
Product Term Sharing Array CLKEN Delay
–
2.0
–
2.4
–
4
ns
53
Shared Product Term Set/Reset Delay
–
2.5
–
3.4
–
5
ns
54
Product Term Set/Reset Delay
–
1.5
–
2
–
3
ns
55
Product Term Output Enable/Disable
–
2.5
–
3.4
–
5
ns
56
Global PT Output Enable/Disable
–
11.5
–
15.4
–
17
ns
1. Internal Timing Parameters are not tested and are for reference only.
Refer to Timing Model in this data sheet for further details.
14
Timing Rev 4.0
Specifications ispLSI 5384VA
Internal Timing Parameters1
Over Recommended Operating Conditions
PARAM
-125
-100
-70
MIN MAX MIN MAX MIN MAX
#
DESCRIPTION
57
GRP Delay from I/O Pad
–
1.5
–
2
–
3
ns
58
GRP Delay from Macrocell
–
1.0
–
1.2
–
1.2
ns
UNIT
GRP
tgrpi
tgrpm
Global Control Delays
tgclk01
tgclk23
tgclken0
tgclken1
tgrst
tgoe
ttoe
59
Global Clock 0 or 1 Delay
–
1.2
–
1.7
–
2.4
ns
60
Global Clock 2 or 3 Delay
–
2.2
–
2.7
–
4.4
ns
61
Global CLKEN 0 Delay
–
1.7
–
2.4
–
3.4
ns
62
Global CLKEN 1 Delay
–
2.7
–
3.4
–
5.4
ns
63
Global Set/Reset Delay
–
12.2
–
15.8
–
23.4
ns
64
Global OE Delay
–
4.7
–
6.3
–
9.4
ns
65
Test OE Delay
–
4.7
–
6.2
–
9.4
ns
1. Internal Timing Parameters are not tested and are for reference only.
Refer to Timing Model in this data sheet for further details.
Timing Rev 4.0
ispLSI 5384VA Timing Model
Input
Buffer
I/O
Pad
INPUT
#20
tidcom
tidreg
#56 tgrpm
#55 tgrpi
PTSA
#40 t5ptcom
#44 tptsacom
#42 t5ptxcom
#41 t5ptxreg
#45 tptsareg
#43 t5ptreg
AND Array
#31 tmco
#35 tmhce
#34 tmsuce
tandhs
tandlp
#39
Register
#29 tmbp
#30 tmlat
#32 tmsu
#33 tmh
#38
Input
Pad
Buffer Delays
#37 tftog
#21
Dedicated
Input Buffers
#57 tgclk0
#58 tgclk123
#59 tgclken0
#60 tgclken1
#61 tgrst
#62 tgoe
#63 ttoe
Output
Buffer
GLB/Macrocell
GRP
#36 tmrst
PT Controls
#49 tsck
#46 tpck
#50 tptsacken
#47 tpcken
#48 tscken
#51 tsrst
#52 tprst
#53 tpoe
#54 tgpoe
15
#22
#23
#24
todcom
todreg
todz
Slew
#28 tslsd
#27 tslfd
#25 tslf
#26 tsls
I/O
Pad
OUTPUT
Specifications ispLSI 5384VA
Power Consumption
Power consumption in the ispLSI 5384VA device depends on two primary factors: the speed at which the
device is operating and the number of product terms
used. The product terms have a fuse-selectable speed/
power tradeoff setting. Each group of four product terms
has a single speed/power tradeoff control fuse that acts
on the complete group of four. The fast “high-speed”
setting operates product terms at their normal full power
consumption. For portions of the logic that can tolerate
longer propagation delays, selecting the slower “lowpower” setting will significantly reduce the power
dissipation for these product terms. Figure 10 shows the
relationship between power and operating speed.
Figure 10. Typical Device Power Consumption vs fmax
600
ispLSI 5384VA
High Speed Mode
550
500
ICC (mA)
450
400
350
300
ispLSI 5384VA
Low Power Mode
250
200
150
0
20
40
60
80
100
120
140
fmax (MHz)
Notes: Configuration of 24 16-bit Counters
Typical Current at 3.3V, 25° C
ICC can be estimated for the ispLSI 5384VA using the following equation:
High Speed Mode: ICC = 40 + (# of PTs * 0.432) + (# of nets * Max. freq * 0.0045)
Low Power Mode: ICC = 40 + (# of PTs * 0.161) + (# of nets * Max. freq * 0.0045)
# of PTs = Number of Product Terms used in design
# of nets = Number of Signals used in device
Max. freq = Highest Clock Frequency to the device
The ICC estimate is based on typical conditions (VCC = 3.3V, room temperature) and an assumption of 2 GLB loads
on average exists. These values are for estimates only. Since the value of ICC is sensitive to operating conditions
and the program in the device, the actual ICC should be verified.
0127/5384
16
Specifications ispLSI 5384VA
Signal Descriptions
Signal Name
TMS
Description
Input - This pin is the Test Mode Select input, which is used to control the JTAG state machine.
TCK
Input - This pin is the Test Clock input pin used to clock through the JTAG state machine.
TDI
Input - This pin is the JTAG Test Data In pin used to load data.
TDO
Output - This pin is the JTAG Test Data Out pin used to shift data out.
TOE / I/O0
Input/Output - This pin functions as either the Test Output Enable pin or an I/O pin based upon
customer's design. TOE tristates all I/O pins when a logic low is driven.
GOE0, GOE1
Input - These two pins are the Global Output Enable input pins.
GSET/GRST
Dedicated Set/Reset Input - This pin is available to all registers in the device and can
independently be configured as preset, reset or no effect on each register. The global polarity
(active high or low input) for this pin is also selectable.
I/O
Input/Output – These are the general purpose I/O used by the logic array.
GND
Ground
NC1
No connect.
VCC
Vcc
CLK0, CLK1
Dedicated clock inputs for all registers. Both clocks are muxed before being used as the clock
input to all registers in the device.
CLK2 / I/O,
CLK3 / I/O
Input/Output - These pins function as either dedicated clock inputs for all registers or an I/O
pin based upon customer's design. Both clocks are muxed before being used as the clock input
to all registers in the device.
VCCIO
Input - This pin is used if an optional 2.5V output is to be used. Every IO can independently
select either 3.3V or the optional voltage as its output level. If the optional output voltage is
not required, this pin must be connected to the Vcc supply. Programmable pull-up resistors and
bus-hold latches only draw current from this supply.
1. NC pins are not to be connected to any active signals, VCC or GND.
17
Specifications ispLSI 5384VA
208-Pin PQFP Signal Locations
Signal
GOE0, GOE1
Pin
78, 79
TOE / I/O0
32
GSET/GRST
138
TCK
29
TDI
30
TDO
136
TMS
28
CLK0, CLK1
184,185
CLK2 / I/O89
162
CLK3 / I/O98
173
VCCIO
137
GND
3, 12, 19, 27, 39, 48, 58, 69, 77, 88, 99, 113, 121, 128, 135, 150, 164, 170, 179, 191, 199
VCC
7, 14, 22, 31, 41, 61, 80, 90, 110, 123, 139, 152, 156, 177, 186, 201
NC
49, 50, 51, 52, 101, 102, 103, 104, 105, 106, 107, 108, 109, 157, 158, 207, 208
1. NCs are not to be connected to any active signals, VCC or GND.
208-Pin PQFP I/O Locations
I/O #
0*
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Pin
32
33
34
35
36
37
38
40
42
43
44
45
46
47
53
54
55
56
57
59
60
62
63
64
I/O #
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Pin
65
66
67
68
70
71
72
73
74
75
76
81
82
83
84
85
86
87
89
91
92
93
94
95
I/O #
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
I/O #
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89*
90
91
92
93
94
95
Pin
96
97
98
100
111
112
114
115
116
117
118
119
120
122
124
125
126
127
129
130
131
132
133
134
Pin
140
141
142
143
144
145
146
147
148
149
151
153
154
155
159
160
161
162
163
165
166
167
168
169
I/O #
96
97
98*
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
Pin
171
172
173
174
175
176
178
180
181
182
183
187
188
189
190
192
193
194
195
196
197
198
200
202
* I/O 89 is multiplexed with CLK2, I/O 98 is multiplexed with CLK3 and I/O 0 is multiplexed with TOE.
18
I/O #
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
Pin
203
204
205
206
1
2
4
5
6
8
9
10
11
13
15
16
17
18
20
21
23
24
25
26
Specifications ispLSI 5384VA
208-Ball fpBGA Signal Locations
Signal
GOE0, GOE1
Ball
P9, P10
TOE / I/O0
K1
GSET/GRST
H14
TCK
K2
TDI
K3
TDO
G14
TMS
J1
CLK0, CLK1
A7, B8
CLK2 / I/O89
B13
CLK3 / I/O98
A11
VCCIO
H15
GND
D10, D12, D13, D5, D7, D8, E4, F13, G4, G8, G9, H10, H13, H7, J10, J13, J4, J7, K8, K9, L13, L4,
M13, N10, N12, N4, N5, N7, N8
VCC
D11, D4, D6, D9, E13, F4, G10, G13, G7, H4, H8, H9, J8, J9, K10, K13, K4, K7, M4, N11, N13, N6, N9
NC1
E15, C14
1. NCs are not to be connected to any active signals, VCC or GND.
208-Ball fpBGA I/O Locations (Sorted by I/O)
I/O #
0*
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Ball
K1
L2
L1
L3
M1
M2
M3
N1
N3
N2
P2
P1
R1
R2
R3
P3
T1
P4
R4
R5
P5
T2
R6
T3
I/O #
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Ball
T4
T5
R7
P6
T6
T7
R8
P8
P7
T8
T9
R9
R10
T10
T11
T12
T13
T14
P11
P12
R11
T15
T16
R14
I/O #
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
I/O #
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89*
90
91
92
93
94
95
Ball
R12
P14
P13
R13
R15
P15
R16
P16
N15
N14
M14
N16
M15
M16
L14
L15
L16
K14
K15
K16
J14
J15
J16
H16
Ball
G16
F14
G15
F16
E14
F15
E16
D16
C16
B16
D15
D14
A16
C15
B15
A15
B14
B13
C13
A14
C12
B12
A13
A12
I/O #
96
97
98*
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
Ball
C11
B11
A11
B10
A10
C10
B9
C9
A9
A8
C8
C7
B7
A6
A5
C6
B6
A4
A3
A2
C5
B5
B4
C4
* I/O 89 is multiplexed with CLK2, I/O 98 is multiplexed with CLK3 and I/O 0 is multiplexed with TOE.
19
I/O #
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
Ball
C3
C2
B3
B2
A1
D2
B1
D3
E2
C1
E3
D1
F2
E1
F1
G2
F3
H2
H3
G3
G1
H1
J2
J3
Specifications ispLSI 5384VA
208-Ball fpBGA I/O Locations (Sorted by Ball)
I/O #
Ball
I/O #
Ball
I/O #
Ball
I/O #
Ball
I/O #
Ball
I/O #
Ball
124
115
114
113
110
109
105
104
100
98*
95
94
91
87
84
126
123
122
118
117
112
108
102
99
A01
A02
A03
A04
A05
A06
A08
A09
A10
A11
A12
A13
A14
A15
A16
B01
B02
B03
B04
B05
B06
B07
B09
B10
97
93
89*
88
86
81
129
121
120
119
116
111
107
106
103
101
96
92
90
85
80
131
125
127
B11
B12
B13
B14
B15
B16
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
C11
C12
C13
C15
C16
D01
D02
D03
83
82
79
133
128
130
76
78
134
132
136
73
77
75
140
135
139
74
72
141
137
138
71
142
D14
D15
D16
E01
E02
E03
E14
E16
F01
F02
F03
F14
F15
F16
G01
G02
G03
G15
G16
H01
H02
H03
H16
J02
143
68
69
70
0*
65
66
67
2
1
3
62
63
64
4
5
6
58
60
61
7
9
8
57
J03
J14
J15
J16
K01
K14
K15
K16
L01
L02
L03
L14
L15
L16
M01
M02
M03
M14
M15
M16
N01
N02
N03
N14
56
59
11
10
15
17
20
27
32
31
42
43
50
49
53
55
12
13
14
18
19
22
26
30
N15
N16
P01
P02
P03
P04
P05
P06
P07
P08
P11
P12
P13
P14
P15
P16
R01
R02
R03
R04
R05
R06
R07
R08
35
36
44
48
51
47
52
54
16
21
23
24
25
28
29
33
34
37
38
39
40
41
45
46
R09
R10
R11
R12
R13
R14
R15
R16
T01
T02
T03
T04
T05
T06
T07
T08
T09
T10
T11
T12
T13
T14
T15
T16
* I/O 89 is multiplexed with CLK2, I/O 98 is multiplexed with CLK3 and I/O 0 is multiplexed with TOE.
20
Specifications ispLSI 5384VA
272-Ball BGA Signal Locations
Signal
GOE0, GOE1
Ball
V11, U11
TOE / I/O 0
M2
GSET/GRST
J18
TCK
L4
TDI
M1
TDO
J20
TMS
L3
CLK0, CLK1
C10, D10
CLK2 / I/O 119
A18
CLK3 / I/O 131
B13
VCCIO
J19
GND
A1, D4, D8, D13, D17, H4, H17, J9, J10, J11, J12, K9, K10, K11, K12, L9, L10, L11, L12, M9, M10,
M11, M12, N4, N17, U4, U8, U13, U17
VCC
D6, D11, D15, F4, F17, K4, L17, R4, R17, U6, U10, U15
NC1
U1, W1, E2, U2, W2, Y2, B3, C3, D3, U3, C5, W4, T4, Y12, A17, T17, W17, B18, C18, B19, C19, D19,
W19, B20, T20, W20, Y20, P19, R3
1. NCs are not to be connected to any active signals, VCC or GND.
21
Specifications ispLSI 5384VA
272-Ball BGA I/O Locations (Sorted by I/O)
I/O #
Ball
I/O #
Ball
I/O #
Ball
0*
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
M2
M3
M4
N1
N2
N3
P1
P2
R1
P3
R2
T1
P4
T2
T3
V1
V2
V3
Y1
W3
V4
U5
Y3
Y4
V5
W5
Y5
V6
U7
W6
Y6
V7
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
W7
Y7
V8
W8
Y8
U9
V9
W9
Y9
W10
V10
Y10
Y11
W11
W12
V12
U12
Y13
W13
V13
Y14
W14
Y15
V14
W15
Y16
U14
V15
W16
Y17
V16
Y18
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
U16
V17
W18
Y19
V18
V19
U19
U18
V20
U20
T18
T19
R18
P17
R19
R20
P18
P20
N18
N19
N20
M17
M18
M19
M20
L19
L18
L20
K20
K19
K18
K17
I/O #
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119*
120
121
122
123
124
125
126
127
Ball
I/O #
Ball
I/O #
J17
H20
H19
H18
G20
G19
F20
G18
F19
E20
G17
F18
E19
D20
E18
C20
E17
D18
A20
A19
B17
C17
D16
A18
C16
B16
A16
C15
D14
B15
A15
C14
128
129
130
131*
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
B14
A14
C13
B13
A13
D12
C12
B12
A12
B11
C11
A11
A10
B10
A9
B9
C9
D9
A8
B8
C8
A7
B7
A6
C7
B6
A5
D7
C6
B5
A4
B4
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
* I/O 119 is multiplexed with CLK2, I/O 131 is multiplexed with CLK3 and I/O 0 is multiplexed with TOE.
22
Ball
A3
D5
C4
B2
A2
B1
C2
D2
E4
C1
D1
E3
E1
F3
G4
F2
F1
G3
G2
G1
H3
H2
H1
J4
J3
J2
J1
K2
K3
K1
L1
L2
Specifications ispLSI 5384VA
272-Ball BGA I/O Locations (Sorted by Ball)
I/O #
164
160
158
154
151
149
146
142
140
139
136
132
129
126
122
119*
115
114
165
163
159
157
153
150
147
143
141
137
135
131*
128
125
Ball
I/O #
Ball
I/O #
Ball
I/O #
Ball
I/O #
A02
A03
A04
A05
A06
A07
A08
A09
A10
A11
A12
A13
A14
A15
A16
A18
A19
A20
B01
B02
B04
B05
B06
B07
B08
B09
B10
B11
B12
B13
B14
B15
121
116
169
166
162
156
152
148
144
138
134
130
127
123
120
117
111
170
167
161
155
145
133
124
118
113
109
172
171
168
112
110
B16
B17
C01
C02
C04
C06
C07
C08
C09
C11
C12
C13
C14
C15
C16
C17
C20
D01
D02
D05
D07
D09
D12
D14
D16
D18
D20
E01
E03
E04
E17
E18
108
105
176
175
173
107
104
102
179
178
177
174
106
103
101
100
182
181
180
99
98
97
186
185
184
183
96
189
187
188
95
94
E19
E20
F01
F02
F03
F18
F19
F20
G01
G02
G03
G04
G17
G18
G19
G20
H01
H02
H03
H18
H19
H20
J01
J02
J03
J04
J17
K01
K02
K03
K17
K18
93
92
190
191
90
89
91
0*
1
2
85
86
87
88
3
4
5
82
83
84
6
7
9
12
77
80
81
8
10
76
78
79
K19
K20
L01
L02
L18
L19
L20
M02
M03
M04
M17
M18
M19
M20
N01
N02
N03
N18
N19
N20
P01
P02
P03
P04
P17
P18
P20
R01
R02
R18
R19
R20
11
13
14
74
75
21
28
37
48
58
64
71
70
73
15
16
17
20
24
27
31
34
38
42
47
51
55
59
62
65
68
69
Ball
T01
T02
T03
T18
T19
U05
U07
U09
U12
U14
U16
U18
U19
U20
V01
V02
V03
V04
V05
V06
V07
V08
V09
V10
V12
V13
V14
V15
V16
V17
V18
V19
* I/O 119 is multiplexed with CLK2, I/O 131 is multiplexed with CLK3 and I/O 0 is multiplexed with TOE.
23
I/O #
72
19
25
29
32
35
39
41
45
46
50
53
56
60
66
18
22
23
26
30
33
36
40
43
44
49
52
54
57
61
63
67
Ball
V20
W03
W05
W06
W07
W08
W09
W10
W11
W12
W13
W14
W15
W16
W18
Y01
Y03
Y04
Y05
Y06
Y07
Y08
Y09
Y10
Y11
Y13
Y14
Y15
Y16
Y17
Y18
Y19
Specifications ispLSI 5384VA
388-Ball BGA Signal Locations
Signal
GOE0, GOE1
Ball
AF14, AD13
TOE / I/O0
T1
GSET/GRST
L25
TCK
T2
TDI
R3
TDO
N24
TMS
R1
CLK0, CLK1
A13, C14
CLK2 / I/O179
A23
CLK3 / I/O197
B17
VCCIO
M26
GND
A1, A2, A26, B2, B25, B26, C3, C24, D4, D9, D14, D19, D23, H4, J23, L11, L12, L13, L14, L15, L16,
M11, M12, M13, M14, M15, M16, N4, N11, N12, N13, N14, N15, N16, P11, P12, P13, P14, P15, P16,
P23, R11, R12, R13, R14, R15, R16, T11, T12, T13, T14, T15, T16, V4, W23, AC4, AC8, AC13, AC18,
AC23, AD3, AD24, AE1, AE2, AE25, AF1, AF25, AF26
VCC
NC
1
D6, D11, D16, D21, F4, F23, L4, L23, T4, T23, AA4, AA23, AC6, AC11, AC16, AC21
C9, D2, E24, L1, AC25, AF19
1. NCs are not to be connected to any active signals, VCC or GND.
24
Specifications ispLSI 5384VA
388-Ball BGA I/O Locations (Sorted by I/O)
I/O #
Ball
I/O #
Ball
I/O #
Ball
I/O #
Ball
I/O #
Ball
I/O #
Ball
0*
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
T1
R4
U2
T3
U1
U4
V2
U3
V1
W2
W1
V3
Y2
W4
Y1
W3
AA2
Y4
AA1
Y3
AB2
AB1
AA3
AC2
AB4
AC1
AB3
AD2
AC3
AD1
AF2
AE3
AF3
AE4
AD4
AF4
AE5
AC5
AD5
AF5
AE6
AC7
AD6
AF6
AE7
AF7
AD7
AE8
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
AC9
AF8
AD8
AE9
AF9
AE10
AD9
AF10
AC10
AE11
AD10
AF11
AE12
AF12
AD11
AE13
AC12
AF13
AD12
AE14
AC14
AE15
AD14
AF15
AE16
AD15
AF16
AC15
AE17
AD16
AF17
AC17
AE18
AD17
AF18
AE19
AD18
AE20
AC19
AF20
AD19
AE21
AC20
AF21
AD20
AE22
AF22
AD21
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
AE23
AC22
AF23
AD22
AE24
AD23
AF24
AE26
AD25
AD26
AC24
AC26
AB25
AB23
AB24
AB26
AA25
Y23
AA24
AA26
Y25
Y26
Y24
W25
V23
W26
W24
V25
V26
U25
V24
U26
U23
T25
U24
T26
R25
R26
T24
P25
R23
P26
R24
N25
N23
N26
P24
M25
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179*
180
181
182
183
184
185
186
187
188
189
190
191
M24
L26
M23
K25
L24
K26
K23
J25
K24
J26
H25
H26
J24
G25
H23
G26
H24
F25
G23
F26
G24
E25
E26
F24
D25
E23
D26
C25
D24
C26
A25
B24
A24
B23
C23
A23
B22
D22
C22
A22
B21
D20
C21
A21
B20
A20
C20
B19
192
193
194
195
196
197*
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
D18
A19
C19
B18
A18
B17
C18
A17
D17
B16
C17
A16
B15
A15
C16
B14
D15
A14
C15
B13
D13
B12
C13
A12
B11
C12
A11
D12
B10
C11
A10
D10
B9
C10
A9
B8
A8
B7
D8
A7
C8
B6
D7
A6
C7
B5
A5
C6
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
B4
D5
A4
C5
B3
C4
A3
B1
C2
C1
D3
D1
E2
E4
E3
E1
F2
G4
F3
F1
G2
G1
G3
H2
J4
H1
H3
J2
J1
K2
J3
K1
K4
L2
K3
M2
M1
L3
N2
M4
N1
M3
P2
P4
P1
N3
R2
P3
* I/O 179 is multiplexed with CLK2, I/O 197 is multiplexed with CLK3 and I/O 0 is multiplexed with TOE.
25
Specifications ispLSI 5384VA
388-Ball BGA I/O Locations (Sorted by Ball)
I/O #
246
242
238
235
231
228
226
222
218
215
209
205
203
199
196
193
189
187
183
179*
176
174
247
244
240
237
233
229
227
224
220
216
213
211
207
204
201
197*
195
191
188
184
180
177
175
249
248
245
Ball
I/O #
Ball
I/O #
Ball
I/O #
A03
A04
A05
A06
A07
A08
A09
A10
A11
A12
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
B01
B03
B04
B05
B06
B07
B08
B09
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
C01
C02
C04
243
239
236
232
225
221
217
214
210
206
202
198
194
190
186
182
178
171
173
251
250
241
234
230
223
219
212
208
200
192
185
181
172
168
170
255
252
254
253
169
165
166
259
256
258
167
161
163
C05
C06
C07
C08
C10
C11
C12
C13
C15
C16
C17
C18
C19
C20
C21
C22
C23
C25
C26
D01
D03
D05
D07
D08
D10
D12
D13
D15
D17
D18
D20
D22
D24
D25
D26
E01
E02
E03
E04
E23
E25
E26
F01
F02
F03
F24
F25
F26
261
260
262
257
162
164
157
159
265
263
266
158
160
154
155
268
267
270
264
156
151
153
271
269
274
272
150
152
147
149
273
277
148
145
276
275
281
279
146
144
143
280
278
285
140
139
141
284
G01
G02
G03
G04
G23
G24
G25
G26
H01
H02
H03
H23
H24
H25
H26
J01
J02
J03
J04
J24
J25
J26
K01
K02
K03
K04
K23
K24
K25
K26
L02
L03
L24
L26
M01
M02
M03
M04
M23
M24
M25
N01
N02
N03
N23
N25
N26
P01
282
287
283
142
135
137
286
1
136
138
132
133
0*
3
134
129
131
4
2
7
5
128
130
125
127
8
6
11
120
126
123
124
10
9
15
13
122
119
121
14
12
19
17
113
118
116
117
18
Ball
P02
P03
P04
P24
P25
P26
R02
R04
R23
R24
R25
R26
T01
T03
T24
T25
T26
U01
U02
U03
U04
U23
U24
U25
U26
V01
V02
V03
V23
V24
V25
V26
W01
W02
W03
W04
W24
W25
W26
Y01
Y02
Y03
Y04
Y23
Y24
Y25
Y26
AA01
I/O #
16
22
114
112
115
21
20
26
24
109
110
108
111
25
23
28
37
41
48
56
64
68
75
79
86
90
97
106
107
29
27
34
38
42
46
50
54
58
62
66
70
73
77
81
84
88
92
95
Ball
I/O #
Ball
AA02
AA03
AA24
AA25
AA26
AB01
AB02
AB03
AB04
AB23
AB24
AB25
AB26
AC01
AC02
AC03
AC05
AC07
AC09
AC10
AC12
AC14
AC15
AC17
AC19
AC20
AC22
AC24
AC26
AD01
AD02
AD04
AD05
AD06
AD07
AD08
AD09
AD10
AD11
AD12
AD14
AD15
AD16
AD17
AD18
AD19
AD20
AD21
99
101
104
105
31
33
36
40
44
47
51
53
57
60
63
67
69
72
76
80
83
85
89
93
96
100
103
30
32
35
39
43
45
49
52
55
59
61
65
71
74
78
82
87
91
94
98
102
AD22
AD23
AD25
AD26
AE03
AE04
AE05
AE06
AE07
AE08
AE09
AE10
AE11
AE12
AE13
AE14
AE15
AE16
AE17
AE18
AE19
AE20
AE21
AE22
AE23
AE24
AE26
AF02
AF03
AF04
AF05
AF06
AF07
AF08
AF09
AF10
AF11
AF12
AF13
AF15
AF16
AF17
AF18
AF20
AF21
AF22
AF23
AF24
* I/O 179 is multiplexed with CLK2, I/O 197 is multiplexed with CLK3 and I/O 0 is multiplexed with TOE.
26
Specifications ispLSI 5384VA
Pin Configuration
208
207
206
205
204
203
202
201
200
199
198
197
196
195
194
193
192
191
190
189
188
187
186
185
184
183
182
181
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
162
161
160
159
158
157
NC1
NC1
I/O 123
I/O 122
I/O 121
I/O 120
I/O 119
VCC
I/O 118
GND
I/O 117
I/O 116
I/O 115
I/O 114
I/O 113
I/O 112
I/O 111
GND
I/O 110
I/O 109
I/O 108
I/O 107
VCC
CLK1
CLK0
I/O 106
I/O 105
I/O 104
I/O 103
GND
I/O 102
VCC
I/O 101
I/O 100
I/O 99
I/O 98 / CLK32
I/O 97
I/O 96
GND
I/O 95
I/O 94
I/O 93
I/O 92
I/O 91
GND
I/O 90
I/O 89 / CLK22
I/O 88
I/O 87
I/O 86
NC1
NC1
ispLSI 5384VA 208-pin PQFP (with Heat Spreader)
ispLSI 5384VA
Top View
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
VCC
I/O 85
I/O 84
I/O 83
VCC
I/O 82
GND
I/O 81
I/O 80
I/O 79
I/O 78
I/O 77
I/O 76
I/O 75
I/O 74
I/O 73
I/O 72
VCC
GSET/GRST
VCCIO
TDO
GND
I/O 71
I/O 70
I/O 69
I/O 68
I/O 67
I/O 66
GND
I/O 65
I/O 64
I/O 63
I/O 62
VCC
I/O 61
GND
I/O 60
I/O 59
I/O 58
I/O 57
I/O 56
I/O 55
I/O 54
GND
I/O 53
I/O 52
VCC
NC1
NC1
NC1
NC1
NC1
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
I/O 14
I/O 15
I/O 16
I/O 17
I/O 18
GND
I/O 19
I/O 20
VCC
I/O 21
I/O 22
I/O 23
I/O 24
I/O 25
I/O 26
I/O 27
GND
I/O 28
I/O 29
I/O 30
I/O 31
I/O 32
I/O 33
I/O 34
GND
GOE0
GOE1
VCC
I/O 35
I/O 36
I/O 37
I/O 38
I/O 39
I/O 40
I/O 41
GND
I/O 42
VCC
I/O 43
I/O 44
I/O 45
I/O 46
I/O 47
I/O 48
I/O 49
I/O 50
GND
I/O 51
1NC
1NC
1NC
1NC
I/O 124
I/O 125
GND
I/O 126
I/O 127
I/O 128
VCC
I/O 129
I/O 130
I/O 131
I/O 132
GND
I/O 133
VCC
I/O 134
I/O 135
I/O 136
I/O 137
GND
I/O 138
I/O 139
VCC
I/O 140
I/O 141
I/O 142
I/O 143
GND
TMS
TCK
TDI
VCC
2I/O 0 / TOE
I/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
GND
I/O 7
VCC
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
GND
1NC
1NC
1NC
1NC
208-PQFP/5384V
1. NC pins are not to be connected to any active signal, Vcc or GND.
2. Pins have dual function capability.
27
Specifications ispLSI 5384VA
Part Number Description
ispLSI 5384VA – XXX X XXXX X
Device Family
Grade
Blank = Commercial
I = Industrial
Device Number
Package
Q208 = 208-Pin PQFP
(with Heat Spreader)
B208 = 208-Ball fpBGA
(Thermally Enhanced)
B272 = 272-Ball BGA
B388 = 388-Ball BGA
Speed
125 = 125 MHz fmax
100 = 100 MHz fmax
70 = 70 MHz fmax
Power
L = Low
0212/5384va
Ordering Information
COMMERCIAL
Family
ispLSI
fmax
tpd
Ordering Number
Package
125
7.5
ispLSI 5384VA-125LQ208
208-Pin PQFP
125
7.5
ispLSI 5384VA-125LB208
208-Ball fpBGA
125
7.5
ispLSI 5384VA-125LB272
272-Ball BGA
125
7.5
ispLSI 5384VA-125LB388
388-Ball BGA
100
10
ispLSI 5384VA-100LQ208
208-Pin PQFP
100
10
ispLSI 5384VA-100LB208
208-Ball fpBGA
100
10
ispLSI 5384VA-100LB272
272-Ball BGA
100
10
ispLSI 5384VA-100LB388
388-Ball BGA
70
15
ispLSI 5384VA-70LQ208
208-Pin PQFP
70
15
ispLSI 5384VA-70LB208
208-Ball fpBGA
70
15
ispLSI 5384VA-70LB272
272-Ball BGA
70
15
ispLSI 5384VA-70LB388
388-Ball BGA
INDUSTRIAL
Family
fmax
tpd
Ordering Number
Package
ispLSI
70
15
ispLSI 5384VA-70LB272I
272-Ball BGA
28