MCC FR6A THRU FR6M omponents 21201 Itasca Street Chatsworth !"# $ % !"# Features • • • • 6 Amp Fast Recovery Rectifier Low Leakage Low Forward Voltage Drop High Current Capability Fast Switching Speed For High Efficiency 50 to 1000 Volts Maximum Ratings • Operating Temperature: -55°C to +150°C • Storage Temperature: -55°C to +150°C MCC Part Number FR6A FR6B FR6D FR6G FR6J FR6K FR6M Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V DO-214AB (SMCJ) (Round Lead) H Cathode Band J A E D F IF(AV) 6A IFSM 300A 8.3ms, half sine VF 1.30V IFM = 6.0A; TA = 25°C IR 10µA 50µA TA = 25°C TA = 55°C 150ns 250ns 500ns IF=0.5A, IR =1.0A, Irr =0.25A Trr TA = 55°C B G Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time FR6A-FR6G FR6J FR6K-FR6M C DIMENSIONS DIM A B C D E F G H J INCHES MIN .200 .177 .002 --.053 .168 .320 .239 .234 MM MIN 5.08 4.70 .05 --1.35 4.27 8.13 6.08 5.95 MAX .214 .203 .005 .02 .067 .179 .330 .243 .240 MAX 5.43 5.30 .13 .51 1.70 4.55 8.38 6.18 6.10 SUGGESTED SOLDER PAD LAYOUT 0.190 0.200” 0.070” *Pulse Test: Pulse Width 300µsec, Duty Cycle 1% www.mccsemi.com NOTE MCC FR6A thru FR6M Figure 1 Typical Forward Characteristics 20 Figure 2 Forward Derating Curve 10 12 6 4 10 2 Amps 25°C 8 1 .6 Amps .4 6 4 .2 2 .1 .06 0 .04 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 50 75 100 125 °C .02 .01 .6 .8 1.0 1.2 1.4 1.6 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF T J =25°C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 Junction Capacitance - pF versus Reverse Voltage - Volts www.mccsemi.com 400 1000 150 175 MCC FR6A thru FR6M Figure 4 Peak Forward Surge Current 300 250 200 150 Amps 100 50 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 Pulse Generator Note 2 25Vdc 1Ω Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm www.mccsemi.com