MIC2981/2982 Micrel MIC2981/2982 High-Voltage High-Current Source Driver Array Preliminary Information General Features The MIC2981/82 is an 8-channel, high-voltage, high-current source driver array ideal for switching high-power loads from logic-level TTL, CMOS, or PMOS control signals. • • • • • These drivers can manage multiple loads of up to 50V and 500mA, limited only by package power dissipation. Micrel’s MIC2981/82 features inputs compatible with 5V TTL and 5V to 15V CMOS or PMOS logic outputs. Micrel’s dualmarked device replaces either UDN2981 or UDN2982 devices. The MIC2981/82 is available in the 18-pin plastic DIP and 18lead wide SOP package. Both devices operate in the industrial temperature range. Output voltage to 50V Output current to 500mA Transient-protected outputs Integral clamp diodes TTL, CMOS, or PMOS compatible inputs Applications • Relay and solenoid switching • Stepping motor • LED and incandescent displays Ordering Information Part Number Temperature Range Package MIC2981BN/ MIC2982BN* –40°C to +85°C 18-pin DIP MIC2981BWM/ MIC2982BWM* –40°C to +85°C 18-pin wide SOP * Orders for MIC2981BN or MIC2982BN will be filled with dual-marked MIC2981/82BN. Orders for MIC2981BWM or MIC2982BWM will be filled with dual-marked MIC2981/82BWM. Functional Diagrams IN1 OUT1 VS IN2 OUT2 20k IN3 OUT3 1.8k IN IN4–IN7 4 OUT4–OUT7 800Ω OUT 1.5k IN8 OUT8 VS GND GND Typical MIC2891/2982 Source Driver MIC2981 MIC2982 Micrel, Inc. • 1849 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 944-0970 • http://www.micrel.com November 1999 1 MIC2981/2982 MIC2981/2982 Micrel Pin Configuration IN1 1 18 OUT1 IN2 2 17 OUT2 IN3 3 16 OUT3 IN4 4 15 OUT4 IN5 5 14 OUT5 IN6 6 13 OUT6 IN7 7 12 OUT7 IN8 8 11 OUT8 VS 9 10 GND 18-Pin DIP (N) 18-Pin Wide SOP (WM) Pin Description Pin No. Pin No. Pin Name 1–8 IN1–IN8 Input 1 through Input 8: Base drive to driver input transistor. 9 VS 10 GND 11–18 OUT8–OUT1 MIC2981/2982 Pin Function Supply Input Ground Output 8 through Output 1: Emitter of Darlington driver output. 2 November 1999 MIC2981/2982 Micrel Absolute Maximum Ratings Operating Ratings Supply Voltage (VS) ...................................................... 50V Output Voltage (VCE) .................................................... 50V Continuous Output Current (IC) ................................ 500mA Input Voltage (VIN) MIC2981/82 ............................................................... 30V Ground Current (IGND) .................................................... 3A Junction Temperature (TJ) ...................................... +150°C Storage Temperature (TS) ....................... –65°C to +150°C Supply Voltage (VS) ............................................ 5V to 50V Ambient Temperature (TA) ......................... –40°C to +85°C Package Thermal Resistance PDIP θJA .............................................................. 56°C/W SOP θJA .............................................................. 84°C/W Electrical Characteristics VS = 50V, TA = +25°C, unless noted. Symbol Parameter Condition Min Typ Max Units ICEX Output Leakage Current VIN = 0.4V, TA = +70°C, Note 1 200 µA VCE(sus) Output Sustaining Voltage IOUT = 45mA VCE(sat) Collector-Emitter Saturation Voltage VIN = 2.4V, IOUT = 100mA VIN = 2.4V, IOUT = 225mA VIN = 2.4V, IOUT = 350mA 1.7 1.8 1.9 2.0 2.1 2.2 V V V IIN(on) Input Current MIC2981 VIN = 2.4V VIN = 3.85 140 310 200 450 µA µA MIC2982 VIN = 2.4V VIN = 12V 140 1.25 200 1.93 µA mA 35 IOUT Output Source Current VIN = 2.4V, VCE = 2.2V IS Supply Current VIN = 2.4, OUT1–8 = open, Note 1 tON Turn-On Delay 0.5EIN to 0.5EOUT, RL = 100Ω, VS = 35V, tOFF Turn-Off Delay 0.5EIN to 0.5EOUT, RL = 100Ω, VS = 35V, Note 2 IR Clamp Diode Leakage Current VR = 50V, VIN = 0.4V, Note 1 VF Clamp Diode Forward Voltage IF = 350mA V 350 mA 10 mA 1.0 2.0 µs 5.0 10 µs 50 µA 2.0 V 1.5 General Note: Devices are ESD protected; however, handling precautions are recommended. Note 1: Applied to all 8 inputs simultaneously. Note 2: Load conditions affect turnoff delay. November 1999 3 MIC2981/2982 MIC2981/2982 Micrel Package Information 0.920 MAX (23.370) PIN 1 0.030-0.110 RAD (0.762-2.794) .250±0.005 (6.350±0.127) 0.060±0.005 (1.524±0.127) 0.290-0.320 (7.336-8.128) 0.020 (0.508) 0.040 TYP (1.016) 0.130±0.005 (3.302±0.127) 0°-10° 0.020 MIN (0.508) 0.018±0.003 (0.457±0.076) 0.100±0.010 (2.540±0.254) 0.125 MIN (3.175) +0.025 –0.015 +0.635 8.255 –0.381 0.325 ( ) 18-Pin Plastic DIP (N) PIN 1 DIMENSIONS: INCHES (MM) 0.301 (7.645) 0.297 (7.544) 0.027 (0.686) 0.031 (0.787) 0.094 (2.388) 0.090 (2.286) 0.103 (2.616) 0.050 (1.270) 0.016 (0.046) 0.099 (2.515) TYP TYP 0.459 (11.659) 0.455 (11.557) 7° TYP 0.015 R (0.381) 0.015 (0.381) SEATING MIN PLANE 0.297 (7.544) 0.293 (7.442) 0.330 (8.382) 0.326 (8.280) 0.022 (0.559) 0.018 (0.457) 5° TYP 10° TYP 0.032 (0.813) TYP 0.408 (10.363) 0.404 (10.262) 18-Pin Wide SOP (WM) MICREL INC. 1849 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 944-0970 WEB USA http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. © 1999 Micrel Incorporated MIC2981/2982 4 November 1999