VISHAY 830B120KBO10

Model 830
Vishay Spectrol
1 13/16" (46 mm) Three Turn Wirewound
Bushing Mount
FEATURES
• Gangable up to 2 sections
• Large range of ohmic values: 15 Ω to 50 kΩ
• Extra taps available upon request
• Ideally suits for all industry applications
ELECTRICAL SPECIFICATIONS
PARAMETER
MODEL 830
Total Resistance
Standard Range
Tolerance:
200 Ω and Above
Below 200 Ω
SPECIAL
to 150 kΩ
SPECIAL
±1%
±3%
15 Ω to 50 kΩ
STANDARD
±3%
±5%
Linearity (Independent)
± 0.25 % standard
15 Ω to 1 kΩ
1 kΩ to 5 kΩ
5 kΩ to 25 kΩ
25 kΩ and Above
± 0.15 %
± 0.10 %
± 0.075 %
± 0.05 %
Noise
100 Ω ENR
Electrical Rotation
1080° + 4° - 0°
Power Rating
3.0 W at 40 °C derated to zero at 125 °C
Insulation Resistance
1000 MΩ minimum 500 VDC
Dielectric Strength
1000 VRMS, 60 Hz
Not to exceed linearity x total resistance or 1 Ω, whichever is greater
Absolute Minimum Resistance
End Voltage
0.5 % of total applied voltage maximum
Phasing
CCW end points sect. 2 phased to sect 1 within 1°
Taps (Extra)
Available as special standard tolerance ± 1°
ORDERING INFORMATION/DESCRIPTION
Model 830 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
830
B
1
20K
BO10
MODEL
BUSHING MOUNT
NUMBER OF SECTIONS
RESISTANCE OF EACH SECTION
PACKAGING
From 1 up to 2 sections
(maximum)
Beginning with the section nearest
the mounting end
Box of 10 pieces
SAP PART NUMBERING GUIDELINES
830
B
1
203
B10
MODEL
STYLE
NUMBER OF SECTIONS
OHMIC VALUE OF SECTION NO 1
PACKAGING
Document Number: 57073
Revision: 23-Mar-07
For technical questions, contact: [email protected]
www.vishay.com
135
Model 830
1 13/16" (46 mm) Three Turn Wirewound
Bushing Mount
Vishay Spectrol
DIMENSIONS in inches (millimeters)
MODEL 830
MTG. FACE
1
± 0.015
1.218
(30.94)
0.250
MIN.
(6.35)
0.062
(1.57)
± 0.031
0.812
(20.62)
± 0.015
0.312
(7.92)
0.030
MAX.
(0.76)
0.010
(0.25)
1 3
2
± 0.015
0.218
(5.54)
3/
8
- 32 UNEF - 2A
± 0.015
1.812
(46.02)
0.062
(1.57)
0.562
(14.27)
+ 0.0000
Ø 0.2497 - 0.0003
(6.34)
Ø 0.125
(3.18)
+ 0.0000
MTG. - 0.0020
Ø 0.4062
(10.32)
1
2
ADD 1.010 ± 0.010 (25.65) FOR 2 GANG UNIT
CW
3
1
SCHEMATIC
TOLERANCES: OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
1080° + 4° - 0°
Bearing Type
Sleeve bearing
Torque (maximums): Starting
Section 1
Section 2
Runouts (Maximums)
Shaft (TIR)
Pilot Dia. (TIR)
Lateral (TIR)
Shaft End Play
Shaft Radial Play
Weight (maximums)
Single Section
Additional Section
Stop Strength
Ganging
Moment Inertia
www.vishay.com
136
STARTING
1.75 oz. - in (126.02 g - cm)
2.55 oz. - in (183.62 g - cm)
RUNNING
1.26 oz. - in (90.01 g - cm)
1.85 oz. - in (133.21 g - cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" min. 0.010" max. (0.05 - 0.25 cm)
0.003" max. (0.08 cm)
3.0 oz. (85.05 g)
2.5 oz. (70.80 g)
750 oz. - in (static) (54.01 kg - cm)
2 sections maximum ears of clamp band between
sections positioned 45°, ± 10° CCW from
terminal center line
5.5 g - cm2 maximum
For technical questions, contact: [email protected]
Document Number: 57073
Revision: 23-Mar-07
Model 830
1 13/16" (46 mm) Three Turn Wirewound
Bushing Mount
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Bushing
Vibration
Aluminum, nickel plated
Molded glass filled thermoset
plastic
Housing and Front Lid
Rear Lid
Molded glass filled nylon
Shaft
Stainless steel, non magnetic,
non-passivated
Terminals
Brass, plated for solderability
Mounting Hardware
Lockwasher:
Panel Nut:
Internal tooth steel, nickel plated
Brass, nickel plated
10 g thru 500 CPS
Shock
50 g
Rotational Life
500 000 shaft revolution
Load Life
900 h
Temperature Range
- 55 °C to + 125 °C
Salt Spray
48 h
MARKING
Unit
Identification
Units will be marked with Spectrol name and model no, resistance and resistance tolerance, linearity, terminal
identification, and date code
POWER RATING CHART
RESISTANCE ELEMENT DATA
12
STANDARD
RESISTANCE RESOVALUES
LUTION
(W)
(%)
RATED POWER IN W
10
8
6
4
2
0
0
20
40
60
80
100
120
AMBIENT TEMPERATURE IN °C
Document Number: 57073
Revision: 23-Mar-07
140
OHMS
PER
TURN
MAXIMUM MAXIMUM
WIRE
CURRENT VOLTAGE
TEMP.
AT 70 °C ACROSS
COEF.
AMBIENT
COIL
(ppm/°C)
(mA)
(V)
20
0.094
0.019
387
8
800
50
0.074
0.037
245
12
800
100
0.071
0.071
173
17
180
200
0.072
0.145
122
25
20
500
0.064
0.320
77
39
20
1K
0.050
0.500
55
55
20
2K
0.047
0.948
39
77
20
5K
0.035
1.73
24
125
20
10K
0.029
2.92
17
176
20
20K
0.024
4.80
12
250
20
50K
0.017
8.31
8
375
20
100K
0.015
14.5
5
600
20
150K
0.013
20.0
4
750
20
For technical questions, contact: [email protected]
www.vishay.com
137
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1