SOLID STATE LED LAMPS SUBMINIATURE T-1 3/4 (1.9mm) AlGaAs RED AllnGaP ORANGE AllnGaP YELLOW PACKAGE DIMENSIONS 0.087 (2.2) 0.079 (2.0) EMITTER 0.276 (7.0) MIN 0.024 (0.6) 0.016 (0.4) ANODE Clear Clear Clear FEATURES 0.091 (2.3) 0.083 (2.1) • Subminiature package 0.020 (0.5) 0.012 (0.3) 0.075 (1.9) 0.063 (1.6) HLMP-Q106A HLMA-QH00A HLMA-QL00A • Low profile package • Three lead bend options for surface mounting 0.058 (1.40) 0.050 (1.28) • Available in tape and reel 0.056 (1.44) 0.048 (1.24) 0.010 (0.26) 0.002 (0.06) 0.031 (0.78) 0.023 (0.58) DESCRIPTION CATHODE MARK (COLOR STRIPE ON SIDE OF PACKAGE) These subminiature LED lamps are intended for high volume, low cost status indication on PCBs, as well as for backlighting keyboards and switches. Choices of “Yoke”, “Z-Bend” or “GullWing” lead bends are available. NOTE: Dimensions are in inches (mm). ABSOLUTE MAXIMUM RATINGS Parameter Continuous Forward Current - IF Peak Forward Current - IF (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage - VR (IR = 10 µA) Power Dissipation - PD (TA = 25°C unless otherwise specified) AlGaAs Red AllnGaP Orange AllnGaP Yellow HLMP-Q106A HLMA-QH00A HLMA-QL00A 50 50 50 mA 200 100 100 mA 5 5 5 V 120 120 mW 100 Units Operating Temperature - TOPR -40 to +100 °C Storage Temperature - TSTG -40 to +100 °C Wave 260 for 5 sec °C Reflow 260 for 10 sec Lead Soldering Time - TSOL ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) AlGaAs Red AllnGaP Orange AllnGaP Yellow HLMP-Q106A HLMA-QH00A HLMA-QL00A Minimum 50 150 150 Typical 500 500 500 Part Number Luminous Intensity (mcd) Condition IF = 20mA Forward Voltage (V) IF = 20mA Maximum 2.4 2.4 2.4 Typical 1.9 1.9 1.9 Peak Wavelength (nm) 660 620 590 IF = 20mA Spectral Line Half Width (nm) 20 18 15 IF = 20mA Viewing Angle (°) 25 25 25 IF = 20mA 1 of 4 4/4/00 300049A SOLID STATE LED LAMPS SUBMINIATURE T-1 3/4 (1.9mm) AlGaAs RED AllnGaP ORANGE AllnGaP YELLOW HLMP-Q106A HLMA-QH00A HLMA-QL00A Clear Clear Clear TYPICAL PERFORMANCE CURVES 100 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 90 80 70 AllnGaP Yellow AllnGaP Orange AlGaAs Red 60 50 40 30 20 10 1.5 1.0 0.5 0.0 0 1.0 2.0 1.5 2.0 2.5 3.0 0 20 VF - FORWARD VOLTAGE (V) NORMALIZED INTENSITY RELATIVE INTENSITY AlGaAs Red 0.5 0 2 of 4 50 1.0 AllnGaP Yellow 600 40 Fig. 2 Relative Luminous Intensity vs. DC Forward Current AllnGaP Orange 550 30 IF - DC FORWARD CURRENT (mA) Fig. 1 Forward Current vs. Forward Voltage 1.0 20 650 700 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -50 -40 -30 -20 -10 0 10 20 30 WAVELENGTH (nm) ANGULAR DISPLACEMENT - DEGREES Fig. 3 Relative Intensity vs. Peak Wavelength Fig. 4 Relative Luminous Intensity vs. Angular Displacement 4/4/00 40 50 300049A SOLID STATE LED LAMPS SUBMINIATURE T-1 3/4 (1.9mm) AlGaAs RED AllnGaP ORANGE AllnGaP YELLOW Gull-Wing Lead Option HLMP-Q106A HLMA-QH00A HLMA-QL00A Clear Clear Clear Yoke Lead Option 0.087 (2.21) 0.079 (2.01) 0.087 (2.21) 0.079 (2.01) 0.020 (0.50) 0.079 (2.00) 0.091 (2.31) 0.083 (2.11) 0.016 (0.4) 0.024 (0.61) 0.016 (0.41) 0.045 (1.14) 0.020 (0.51) 0.012 (0.30) 0.304 (7.72) 0.296 (7.52) 0.159 (4.05) 0.148 (3.75) 0.075 (1.90) 0.067 (1.70) 0.075 (1.91) 0.063 (1.60) 0.058 (1.48) 0.050 (1.28) 0.058 (1.48) 0.050 (1.28) 0.035 (0.90) 0.028 (0.70) .026 [0.66] 0.027 (0.68) 0.009 (0.23) 0.016 (0.40) 0.008 (0.20) 0.040 (1.02) 0.007 (0.1) 0.001 (.03) 0.109 (2.76) Z-Bend Lead Option 0.087 (2.21) 0.079 (2.01) 0.024 (0.61) 0.016 (0.41) 0.091 (2.31) 0.083 (2.11) 0.020 (0.51) 0.012 (0.30) 0.075 (1.90) 0.067 (1.70) 0.058 (1.48) 0.050 (1.28) .026 [0.66] 0.027 (0.68) NOTE All dimensions are in inches (millimeters) 0.120 (3.04) 0.181 (4.60) 0.244 (6.20) 0.236 (6.00) www.qtopto.com Call QT Optoelectronics for more information or the phone number of your nearest distributor. United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7352417 3 of 4 4/4/00 300049A SOLID STATE LED LAMPS SUBMINIATURE T-1 3/4 (1.9mm) DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 4 of 4 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2000 Fairchild Semiconductor Corporation 4/4/00 300049A