Revised January 2005 NC7NZ34 TinyLogic UHS Triple Buffer General Description Features The NC7NZ34 is a triple buffer from Fairchild’s Ultra High Speed Series of TinyLogic in the space saving US8 package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. ■ Space saving US8 surface mount package ■ MicroPak Pb-Free leadless package ■ Ultra High Speed: tPD 2.4 ns Typ into 50 pF at 5V VCC ■ High Output Drive: ±24 mA at 3V VCC ■ Broad VCC Operating Range: 1.65V to 5.5V ■ Power down high impedance inputs/outputs ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Code: Product Order Package Code Number Number Top Mark NC7NZ34K8X MAB08A 7NZ34 NC7NZ34L8X MAC08A P9 Package Description Supplied As 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel Pb-Free 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Logic Symbol Connection Diagrams IEEE/IEC (Top View) Pin Descriptions Pin Names Description A1, A2, A3 Data Inputs Y1, Y2, Y3 Output Function Table Pin One Orientation Diagram AAA represents Product Code Top Mark - see ordering code Y=A Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Input Output A Y L L H H Pad Assignments for MicroPak H = HIGH Logic Level L = LOW Logic Level (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS500494 MicroPak is a trademark of Fairchild Semiconductor Corporation. www.fairchildsemi.com NC7NZ34 TinyLogic UHS Triple Buffer July 2001 NC7NZ34 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC ) −0.5V to +7.0V DC Input Voltage (VIN) −0.5V to +7.0V DC Output Voltage (VOUT) −0.5V to +7.0V Recommended Operating Conditions (Note 2) Supply Voltage DC Input Diode Current (IIK) VIN < 0V −50 mA DC Output Diode Current (IOK) VOUT < 0V −50 mA 1.65V to 5.5V Data Retention 1.5V to 5.5V Input Voltage (VIN) 0V to 5.5V Output Voltage (VOUT) 0V to VCC Input Rise and Fall Time (tr, tf) ±50 mA VCC = 1.8V, 2.5V ± 0.2V 0 to 20 ns/V ±100 mA VCC = 3.3V ± 0.3V 0 to 10 ns/V −65°C to +150 °C VCC = 5.5V ± 0.5V DC Output Source/Sink Current (IOUT) DC VCC/GND Current (ICC/IGND) Storage Temperature (TSTG) Operating (VCC) 150 °C Junction Temperature under Bias (TJ) 0 to 5 ns/V −40°C to +85°C Operating Temperature (TA) Thermal Resistance (θJA) Junction Lead Temperature (TL) 260 °C (Soldering, 10 seconds) Power Dissipation (PD) @ +85°C 250°C/W Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. 250 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter TA = +25°C VCC Typ TA = −40°C to +85°C (V) Min Max Min HIGH Level Control 1.8 ± 0.15 0.75 VCC 0.75 VCC Input Voltage 2.3 to 5.5 0.7 VCC 0.7 VCC LOW Level Control 1.8 ± 0.15 0.25 VCC 0.25 VCC Input Voltage 2.3 to 5.5 0.3 VCC 0.3 VCC Units Conditions Max V V HIGH Level Control 1.65 1.55 1.65 Output Voltage 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.14 1.9 IOH = −8 mA 3.0 2.4 2.75 2.4 IOH = −16 mA 3.0 2.3 2.62 2.3 IOH = −24 mA 4.5 3.8 4.13 3.8 LOW Level Control 1.65 Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com 1.55 IOH = −100 µA V VIN = VIH IOH = −4 mA IOH = −32 mA 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.24 2.3 0.10 0.3 0.3 IOL = 100 µA V VIN = VIL IOL = 4 mA IOL = 8 mA 3.0 0.16 0.4 0.4 IOL = 16 mA 3.0 0.24 0.55 0.55 IOL = 24 mA 4.5 0.25 0.55 0.55 ±0.1 ±1.0 µA 0 ≤ VIN ≤ 5.5V 0 to 5.5 IOL = 32 mA 0.0 1.0 10 µA VIN or VOUT = 5.5V 1.65 to 5.5 1.0 10 µA VIN = 5.5V, GND 2 Symbol tPLH (V) Propagation Delay tPHL tPLH TA = +25°C VCC Parameter Propagation Delay tPHL Min Typ 1.8 ± 0.15 1.8 2.5 ± 0.2 1.0 3.3 ± 0.3 TA = −40°C to +85°C Max Min Max 4.6 8.0 1.8 8.8 3.0 5.2 1.0 5.8 0.8 2.3 3.6 0.8 4.0 5.0 ± 0.5 0.5 1.8 2.9 0.5 3.2 3.3 ± 0.3 1.2 3.0 4.6 1.2 5.1 5.0 ± 0.5 0.8 2.4 3.8 0.8 4.2 CIN Input Capacitance 0 2.5 CPD Power Dissipation 3.3 9 Capacitance 5.0 11 Units ns ns Conditions CL = 15 pF, RL = 1 MΩ CL = 50 pF, Figure Number Figures 1, 3 RL = 500Ω Figures 1, 3 (Note 3) Figure 2 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). Dynamic Switching Characteristics Symbol Parameter Conditions VCC TA = 25°C (V) Typical Unit VOLP Quiet Output Dynamic Peak VOL CL = 50pF, VIH = 5.0V, VIL = 0V 5.0 0.8 V VOLV Quiet Output Dynamic Valley VOL CL = 50pF, VIH = 5.0V, VIL = 0V 5.0 −0.8 V AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns FIGURE 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50% FIGURE 3. AC Waveforms FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7NZ34 AC Electrical Characteristics NC7NZ34 Tape and Reel Specification TAPE FORMAT for US8 Package Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator K8X Cover Tape Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Cover Tape TAPE DIMENSIONS inches (millimeters) TAPE FORMAT for MicroPak Package Designator K8X Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) www.fairchildsemi.com 4 NC7NZ34 Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) 5 www.fairchildsemi.com NC7NZ34 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A www.fairchildsemi.com 6 NC7NZ34 TinyLogic UHS Triple Buffer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 8-Lead MicroPak, 1.6 mm Wide Package Number MAC08A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com