MOTOROLA DSP96002FE60

MOTOROLA Freescale Semiconductor, Inc.
SEMICONDUCTOR TECHNICAL DATA
Order this document by:
DSP96002/D, Rev. 2
DSP96002
The DSP96002 is designed to support intensive graphic image and numeric processing. It is
a dual-port, low-power, general purpose floating-point processor. The DSP includes 1024
words of data RAM (equally divided into X data and Y data memory), 1024 words of fullspeed on-chip Program RAM, two data ROMs, a dual-channel Direct Memory Access (DMA)
controller, special on-chip bootstrap hardware, and On-Chip Emulation (OnCE™) debug
circuitry. The Central Processing Unit (CPU) consists of three 32-bit execution units
operating in parallel. The DSP96002 has two identical memory expansion ports with control
lines to facilitate interfacing SRAMs, DRAMs (operating in their fast access modes), and
Video RAMs (VRAMs). Each port can be configured as a Host Interface (HI), which
facilitates easy interface with other processors for multiprocessor applications. Linear arrays
of DSP96002s can be implemented without glue logic. The MPU-style programming model
and instruction set allow straightforward generation of efficient, compact code. The high
speed of the DSP96002 makes it well-suited for high bandwidth and numerically intensive
applications that require floating-point processing and access to large memory subsystems.
18
Bus
Control
Address
Generation
Unit (AGU)
Bus
Control
YAB *
XAB *
PAB *
Address
External
32
Address
Switch
4
32-bit
Host
Interface
Timer
32
Data
Dual Channel
DMA
Controller
Internal
Switch And Bit
Manipulation
Unit
Clock
Generator
Y Data *
Memory
512 × 32
RAM
512 × 32†
ROM
Program
Address
Generator
Program Controller
CLK
32-bit Buses
* Dual Access (DMA/Core)
† 1024 × 32 Virtual Locations
32-bit
Host
Interface
Program
Interrupt
Controller
External
Data
Bus
Switch
32
Data
OnCE
Data ALU
Debug
• IEEE Floating Point Controller
• 32 × 32 Integer ALU
MODC/IRQC
MODB/IRQB
MODA/IRQA
RESET
Figure 1 Block Diagram
©1996 MOTOROLA, INC.
4
Timer
DDB
YDB
XDB
PDB
GDB
Program
Decode
Controller
18
External Address
32
Address
Switch
Program *
X Data *
Memory
Memory
1024 × 32 512 × 32
RAM and
RAM
64 × 32
Bootstrap
512 × 32†
ROM
ROM
Instruction
Cache
External
Data
Bus
Switch
Control
Port B
Control
Port A
Freescale Semiconductor, Inc...
32-BIT GENERAL PURPOSE FLOATING-POINT DUAL-PORT
PROCESSOR
For More Information On This Product,
Go to: www.freescale.com
4
Serial Debug
Port
AA0306
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc...
TABLE OF CONTENTS
SECTION 1
SIGNAL/CONNECTION DESCRIPTIONS . . . . . . . . . . . . . . . . . . 1-1
SECTION 2
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
SECTION 3
PACKAGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
SECTION 4
DESIGN CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
SECTION 5
ORDERING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
APPENDIX A
BOOTSTRAP CODE FOR DSP96002. . . . . . . . . . . . . . . . . . . . . A-1
APPENDIX B
X AND Y MEMORY ROM TABLES . . . . . . . . . . . . . . . . . . . . . . . B-1
FOR TECHNICAL ASSISTANCE:
Telephone:
1-800-521-6274
Email:
[email protected]
Internet:
http://www.motorola-dsp.com
Data Sheet Conventions
This data sheet uses the following conventions:
OVERBAR
Used to indicate a signal that is active when pulled low (For example, the RESET
pin is active when low.)
“asserted”
Means that a high true (active high) signal is high or that a low true (active low)
signal is low
“deasserted”
Means that a high true (active high) signal is low or that a low true (active low)
signal is high
Examples:
Note:
ii
Signal/Symbol
Logic State
Signal State
Voltage
PIN
True
Asserted
VIL/VOL
PIN
False
Deasserted
VIH/VOH
PIN
True
Asserted
VIH/VOH
PIN
False
Deasserted
VIL/VOL
Values for VIL, VOL, VIH, and VOH are defined by individual product specifications.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
DSP96002
Features
FEATURES
Freescale Semiconductor, Inc...
•
Digital signal processing core
–
Efficient 32-bit DSP engine
–
Conforms to IEEE 754-1985 standard for single precision (32-bit) and single
extended precision (44-bit) arithmetic
–
Up to 30 Million Instructions Per Second (MIPS) at 60 MHz
–
Parallel operation of Data ALU, Address Generation Unit (AGU), and program
controller within the CPU allow more processing per instruction cycle
–
Single-cycle 32 × 32 bit parallel multiplier
–
Highly parallel instruction set with unique DSP addressing modes
–
Nested hardware DO loops
–
Instruction cache extended to operate as 4 K byte (1 K word)
–
Fast auto-return interrupts
–
Address buses:
–
–
•
•
One 32-bit unidirectional internal X memory Address Bus (XAB)
•
One 32-bit unidirectional internal Y memory Address Bus (YAB)
•
One 32-bit internal Program Address Bus (PAB)
•
Two 32-bit external address buses
Data buses:
•
One 32-bit bidirectional internal X memory Data Bus (XDB)
•
One 32-bit bidirectional internal Y memory Data Bus (YDB)
•
One 32-bit bidirectional internal Global memory Data Bus (GDB)
•
One 32-bit bidirectional internal DMA Data Bus (DDB)
•
One 32-bit bidirectional internal Program Data Bus (PDB)
•
Two 32-bit external data buses
MCU-like instruction set mnemonics make programming easier
Memory
–
On-chip 1024 × 32-bit Program RAM
–
Two independent on-chip 512 × 32-bit data RAMs
–
Two independent on-chip 512 × 32-bit data ROMs (1024 × 32-bit virtual memory)
–
On-chip 64 × 32-bit bootstrap ROM
MOTOROLA
DSP96002/DRev. 2
For More Information On This Product,
Go to: www.freescale.com
iii
Freescale Semiconductor, Inc.
DSP96002
Product Documentation
Freescale Semiconductor, Inc...
•
–
Off-chip expansion to 2 × 232 32-bit words of data memory
–
Off-chip expansion to 232 32-bit words of program memory
Miscellaneous features
–
Two expansion ports assignable to X data, Y data, or program memory spaces or
a combination thereof, effectively doubling off-chip bus bandwidth.
–
Host interface circuitry on each port provides a flexible slave interface to Direct
Memory Access (DMA) controllers and external processors for easy design of
multimaster systems
–
Write strobe pins support interface to external SRAMs without additional logic
–
Two programmable timers/counters
–
Three external interrupt/mode control lines
–
One external reset line for hardware reset
–
4-pin OnCE port for unobtrusive, processor speed-independent debugging
–
HCMOS design for operating frequencies from 60 MHz down to DC
–
223-pin plastic Pin Grid Array (PGA) package or 240-pin Ceramic Quad Flat Pack
(CQFP) package
–
5.0 V power supply
PRODUCT DOCUMENTATION
The two manuals listed in Table 1 are required for a complete description of the DSP96002
and are necessary to design properly with the device. Documentation is available from a
local Motorola distributor, a Motorola semiconductor sales office, a Motorola Literature
Distribution Center, or through the Motorola DSP home page on the Internet (the source for
the latest information).
Table 1 Additional Documentation
Document Name
Description
Order Number
DSP96002 User’s Manual
Detailed description of the DSP96002 core
processor and peripherals
DSP96002UM/AD
DSP96002 Data Sheet
Electrical and timing specifications, and pin and
package descriptions
DSP96002/D
iv
DSP96002/DRev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
SECTION 1
SIGNAL/CONNECTION DESCRIPTIONS
Freescale Semiconductor, Inc...
SIGNAL GROUPINGS
The input and output signals of the DSP96002 are organized into eight functional
groups, as shown in Table 1-1 and as illustrated in Figure 1-1.
Table 1-1 DSP96002 Functional Signal Groupings
Functional Group
Detailed
Description
Power (VCCN and VCCQ)
Table 1-2
Ground (GNDN and GNDQ)
Table 1-3
Clock (CLK)
Table 1-4
Interrupt and Mode Control
Table 1-5
Port A (Address, Data, and Control)
Table 1-6
Port B (Address, Data, and Control)
Table 1-6
Timer/Event Counters
Table 1-7
OnCE Port
Table 1-8
Figure 1-1 is a diagram of DSP96002 signals by functional group.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-1
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Signal Groupings
Power1
VCCN
VCCQ
DSP96002
Ground2
GNDN
GNDQ
32
/
Address Bus B
BA0–BA31
32
/
Data Bus B
BD0 – BD31
Port B Bus Control
BS1
BS0
BR/W
Freescale Semiconductor, Inc...
Clock Input
CLK
Interrupt and Mode Control
MODA/IRQA
MODB/IRQB
MODC/IRQC
RESET
Address Bus A
AA0–AA31
32
/
Data Bus A
AD0–AD31
32
/
BWR
BBS
BBL
BTT
BTS
BTA
BAE
BDE
BHS
BHA
BHR
BR
BBG
BBB
BBA
Port A Bus Control
AS1
AS0
AR/W
AWR
ABS
ABL
ATT
ATS
ATA
AAE
ADE
AHS
AHA
AHR
ABR
ABG
ABB
ABA
Note:
1.
2.
2
Timer/Event Counters
TIO0–TIO1
On-Chip Emulation Port (OnCE)
DSO
DSI/OSO
DSCK/OS1
DR
Number of power input pins is package dependent. See Section 3.
Number of ground connections is package dependent. See Section
3.
Figure 1-1 Functional Group Pin Allocations
1-2
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Power
POWER
Table 1-2 Power Inputs
Freescale Semiconductor, Inc...
Power Name
Description
VCCN
Normal Power —VCCN inputs are VCC provided for general use with the
DSP96002 peripheral circuits. This input must be tied externally to all other chip
power inputs. The user must provide adequate external decoupling capacitors.
VCCQ
Quiet Power—VCCQ inputs provide isolated power for the internal processing
logic. The voltage should be well-regulated, and the input should be provided
with an extremely low impedance path to the VCC power rail. This input must be
tied externally to all other chip power inputs. The user must provide adequate
external decoupling capacitors.
Note:
The number of available power connecctions is package-dependent. See Section
description of individual package pinouts.
3 for a detailed
GROUND
Table 1-3 Grounds
Ground Name
Description
GNDN
Normal Ground —GNDP connections provide a ground return for the DSP96002
peripheral circuits. This connection must be tied externally to all other chip
ground connections. The user must provide adequate external decoupling
capacitors.
GNDQ
Quiet Ground —GNDQ is an isolated ground for the internal processing logic.
The connection should be provided with an extremely low-impedance path to
ground. This connection must be tied externally to all other chip ground
connections. The user must provide adequate external decoupling capacitors.
Note:
The number of available ground connecctions is package-dependent. See Section
description of individual package pinouts.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3 for a detailed
1-3
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Clock
CLOCK
Table 1-4 Clock Signal
Signal Name
Freescale Semiconductor, Inc...
CLK
Type
State During
Reset
Input
Signal Description
Input
Clock Input—CLK is a high frequency processor clock
input. The frequency is twice the instruction rate. As
shown in Figure 1-2, an internal phase generator divides
CLK into four phases (t0, t1, t2 and t3), which is the basic
instruction execution cycle. Additional tw phases are
optionally generated to insert Wait States (WS) into
instruction execution. A Wait State is formed by pairing
a t2 and tw phase. CLK should be continuous with a 46–
54% duty cycle.
Instruction Cycle
t0
No Wait States
t1
t2
Instruction Cycle
t3
t0
t1
t2
Two Wait States
tw
t2
tw
t2
t3
CLK
Figure 1-2 Clock Input and Instruction Cycle Timing
1-4
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Interrupt and Mode Control
INTERRUPT AND MODE CONTROL
Table 1-5 Interrupt and Mode Control
Freescale Semiconductor, Inc...
Signal Name
Type
State During
Reset
Signal Description
RESET
Input Input
Reset—This input is a direct hardware reset of the
processor. When RESET is asserted low, the signal is
internally synchronized to the input clock (CLK), the DSP
is placed in the Reset state, and the internal phase
generator is reset. A Schmitt trigger input is used for
noise immunity and allows a slowly rising input (such as
a capacitor charging) to reliably reset the chip. If RESET is
deasserted synchronous to the input clock (CLK), exact
start-up timing is guaranteed, allowing multiple
processors to start-up synchronously and operate
together in “lock-step.” When the RESET pin is
deasserted, the initial chip operating mode is latched
from the MODA, MODB and MODC pins.
MODA/IRQA
Input Input
Mode Select A/External Interrupt Request A—This
input is internally synchronized to the input clock (CLK).
MODA/IRQA selects the initial chip operating mode
during hardware reset and becomes a level-sensitive or
negative-edge-triggered, maskable interrupt request
input during normal instruction processing. MODA,
MODB and MODC select one of eight initial chip
operating modes latched into the Operating Mode
Register (OMR) when the RESET pin is deasserted. If
IRQA is asserted synchronous to the input clock (CLK),
multiple processors can be resynchronized by using the
WAIT instruction and asserting IRQA to exit the Wait
state. If the processor is in the Stop standby state and
IRQA is asserted, the processor will exit the Stop state.
MODB/ IRQB
Input Input
Mode Select B/External Interrupt Request B—This input
is internally synchronized to the input clock (CLK).
MODB/IRQB selects the initial chip operating mode
during hardware reset and becomes a level-sensitive or
negative-edge-triggered, maskable interrupt request
input during normal instruction processing. MODA,
MODB and MODC select one of eight initial chip
operating modes latched into the Operating Mode
Register (OMR) when the RESET pin is deasserted. If
IRQB is asserted synchronous to the input clock (CLK),
multiple processors can be resynchronized by using the
WAIT instruction and asserting IRQB to exit the Wait
state.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-5
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-5 Interrupt and Mode Control (Continued)
Signal Name
Freescale Semiconductor, Inc...
MODC/IRQC
Type
State During
Reset
Input Input
Signal Description
Mode Select C/External Interrupt Request C—This input
is internally synchronized to the input clock (CLK).
MODC/IRQC selects the initial chip operating mode
during hardware reset and becomes a level-sensitive or
negative-edge-triggered, maskable interrupt request
input during normal instruction processing. MODA,
MODB and MODC select one of eight initial chip
operating modes latched into the Operating Mode
Register (OMR) when the RESET pin is deasserted. If
IRQC is asserted synchronous to the input clock (CLK),
multiple processors can be resynchronized by using the
WAIT instruction and asserting IRQC to exit the Wait
state.
PORT A AND PORT B
Port A and Port B are identical in pinout and function. The following pin
descriptions apply to both ports. Each port may be a bus master and each port has
a slave Host Interface which can be accessed on demand.
Table 1-6 Port A and Port B
Signal
Name
AA0–AA31
BA0–BA31
1-6
Type
Input
or
Output
State
During
Reset
Tri-stated
Signal Description
Address Bus—A0–A31 specify the address for external
program and data memory accesses. If there is no external
bus activity, A0–A31 remain at their previous values. The
Address Enable (AE) input acts as an output enable control
for A0–A31. A0–A31 are stable whenever the transfer
strobe TS is asserted and may change only when TS is
deasserted. The signal direction depends on whether the
DSP is the bus master:
• Bus Master—A0–A31 are tri-state, active high
outputs.
• Not a Bus Master—A2–A5 are active high inputs
used to select the Host Interface register. Lines A0–
A1 and A6–A31 are tri-stated. As inputs, A2–A5
may change asynchronously relative to the input
clock (CLK).
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Freescale Semiconductor, Inc...
Table 1-6 Port A and Port B (Continued)
State
During
Reset
Signal
Name
Type
AD0–AD31
BD0–BD31
Input/
Output
Tri-stated
Data Bus—D0–D31 are tri-state, active high, bidirectional
input/outputs whether the DSP is a bus master or not. The
Data Enable (DE) input acts as an output enable control for
D0–D31. As a bus master, the data lines are controlled by
the CPU instruction execution or the DMA controller. D0–
D31 are also the Host Interface data lines. If there is no
external bus activity, D0–D31 are tri-stated.
AS0–AS1
BS0–BS1
Output
Tri-stated
Space Select—These signals can be viewed in different
ways, depending on how the external memories are
mapped. They support splitting memory spaces among
ports, and mapping multiple memory spaces into the same
physical memory locations. S0 and S1 are outputs when the
DSP is the bus master and tri-stated when the DSP is not a
bus master. Timing is the same as the address lines A0–
A31.
AR/W
BR/W
Input
or
Output
Tri-stated
Read/Write—R/W is a an output when the DSP is the bus
master and an input when not a bus master. Bus master
timing is the same as the DSP96002 address lines, giving an
“early write” signal for DRAM interfacing. R/W is high for
a read access and low for a write access. The R/W pin is
also the Host Interface read/write input. As an input, R/W
may change asynchronously relative to the input clock.
R/W goes high if the external bus is not used during an
instruction cycle.
AWR
BWR
Output
Tri-stated
Write Strobe —WR is an output when the DSP is the bus
master and tri-stated when it is not a bus master. WR
supports a glueless interface to external SRAMs. WR is
asserted during external memory write cycles to indicate
that the address lines A0–A32, S1, S0, BS, BL, and R/W are
stable. The output data goes to the data bus after WR is
asserted. WR requires a weak external pull-up resistor and
can be connected directly to the WE pin of a Static RAM.
ABS
BBS
Output
Tri-stated
Bus Strobe—BS is an output when the DSP is the bus
master and tri-stated when it is not a bus master. Bus strobe
is asserted at the start of a bus cycle (providing an “early
bus start” signal for DRAM interfacing) and deasserted at
the end of the bus cycle. The early negation provides an
“early bus end” signal useful for external bus control. If the
external bus is not used during an instruction cycle, BS
remains deasserted until the next external bus cycle.
MOTOROLA
Signal Description
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-7
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-6 Port A and Port B (Continued)
Type
State
During
Reset
ATT
BTT
Output
Tri-stated
Transfer Type—TT is an output when the DSP is the bus
master and tri-stated when it is not a bus master. When the
DSP is the bus master, TT is controlled by an on-chip page
circuit. TT is asserted when a fast access memory mode
(Page, Static Column, Nibble or Serial Shift Register) is
detected. If the external bus is not used during an
instruction cycle, or a fault is detected by the page circuit
during an external access, TT remains deasserted. The
parameters of the page circuit fault detection are user
programmable.
ATS
BTS
Input
or
Output
Tri-stated
Transfer Strobe—TS is an output when the DSP is the bus
master and an input when it is not a bus master. When the
DSP is the bus master, TS is asserted to indicate that the
address lines A0–A31, S1, S0, BS, BL and R/W are stable
and that a bus read or bus write transfer is taking place.
During a read cycle, input data is latched inside the
DSP96002 on the rising edge of TS. During a write cycle,
output data is placed on the data bus after TS is asserted.
Therefore, TS can be used as an output enable control for
external data bus buffers if they are present. If the external
bus is not used during an instruction cycle, TS remains
deasserted until the next external bus cycle. An external
flip-flop can delay TS, if required, for slow devices or more
address decoding time. The TS pin is also the Host Interface
transfer strobe input used to enable the data bus output
drivers during host read operations and to latch data inside
the Host Interface during host write operations. As an
input, TS may change asynchronously relative to the input
clock. Write data is latched inside the Host Interface on the
rising edge of TS. When the DSP is the bus master, the
combination of BS and TS can be decoded externally to
determine the status of the current bus cycle and to
generate hardware strobes useful for latching address and
data signals.
Freescale Semiconductor, Inc...
Signal
Name
1-8
Signal Description
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-6 Port A and Port B (Continued)
Signal
Name
Freescale Semiconductor, Inc...
ATA
BTA
Type
Input
State
During
Reset
Input,
ignored
during
reset
Signal Description
Transfer Acknowledge— The TA input is a synchronous
“DTACK” function that can extend an external bus cycle
indefinitely. TA must be asserted and deasserted
synchronously to the input clock (CLK) for proper
operation. TA is sampled on the falling edge of the input
clock (CLK). Any number of wait states (0, 1, 2, …, infinity)
may be inserted by keeping TA deasserted. In a typical
operation, TA is first deasserted at the start of a bus cycle,
then is asserted to enable completion of the bus cycle, and
finally is deasserted before the next bus cycle.The current
bus cycle completes one clock period after TA is asserted
synchronously to CLK. The number of wait states is
determined by the TA input or by the Bus Control Register
(BCR), whichever is longer. The BCR can be used to set the
minimum number of wait states in external bus cycles. If
TA is tied low (asserted) and no wait states are specified in
the BCR, zero wait states will be inserted into external bus
cycles.
Note:
AAE
BAE
Input
Input,
ignored
during
reset
Address Enable—AE is an input that must be asserted and
deasserted synchronous to the input clock (CLK) for proper
operation. If the DSP is the bus master, AE is asserted to
enable the A0–A31 address output drivers. If AE is
deasserted, the address output drivers are tri-stated. If the
DSP is not a bus master, the address output drivers are tristated regardless of whether AE is asserted or deasserted.
The function of AE is to allow implementation of
multiplexed bus systems. An example of such an
implementation is a multiplexed address1/address2 bus
used with dual port memories, such as dynamic VRAMs.
Note:
MOTOROLA
If the DSP96002 is the bus master and there is no external
bus activity or the DSP96002 is not the bus master, then
the TA input is ignored by the core.
There must be at least one undriven CLK period between
enables for multiplexed buses to allow one bus to tristate before another bus is enabled. External control is
responsible for this timing. For non-multiplexed systems,
AE should be tied low.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-9
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-6 Port A and Port B (Continued)
Signal
Name
Freescale Semiconductor, Inc...
ADE
BDE
Type
Input
State
During
Reset
Input,
ignored
during
reset
Signal Description
Data Enable—DE is an input that must be asserted and
deasserted synchronous to the input clock (CLK) for proper
operation. If a bus master or the Host Interface is being
read, DE is asserted to enable the D0–D31 data bus output
drivers. If DE is deasserted, the data bus output drivers are
tri-stated. If not a bus master, the data bus output drivers
are tri-stated regardless of whether DE is asserted or
deasserted. Read-only bus cycles may be performed even
though DE is deasserted. The function of DE is to allow
multiplexed bus systems to be implemented. An example is
a multiplexed data1/data2 bus used for long word
transfers with one 32-bit wide memory.
Note:
AHS
BHS
Input
Input
Host Select—HS is an input that may change asynchronous
to the input clock. HS is asserted low to enable selection of
the Host Interface functions by the address lines A2–A5. If
TS is asserted when HS is asserted, a data transfer with the
Host Interface will take place.
Note:
1-10
There must be at least one undriven CLK period between
enables for multiplexed buses to allow one bus to tristate before another bus is enabled. External control is
responsible for this timing. For non-multiplexed systems,
DE should be asserted (tied low).
Both HS and HA must be tied high to disable the Host
Interface. When HA is asserted, HS is ignored.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-6 Port A and Port B (Continued)
Signal
Name
Freescale Semiconductor, Inc...
AHA
BHA
Type
State
During
Reset
Input
Input
Signal Description
Host Acknowledge—HA is an input that may change
asynchronously to the input clock. HA is used to
acknowledge either an interrupt request or a DMA request
by the Host Interface. When the Host Interface is not in
DMA mode, asserting TS when HA and HR are asserted
will enable the contents of the Host Interface Interrupt
Vector Register (IVR) onto the data bus outputs D0–D31.
This provides an interrupt acknowledge capability
compatible with MC68000 family processors.
If the Host Interface is in DMA mode, HA is used as a DMA
transfer acknowledge input and it is asserted by an external
device to transfer data between the Host Interface registers
and an external device. In DMA read mode, HA is asserted
to read the Host Interface RX register on the data bus
outputs D0–D31. In DMA Write mode, HA is asserted to
strobe external data into the Host Interface TX register.
Write data is latched into the TX register on the rising edge
of HA.
AHR
BHR
Output
Driven
high
Host Request—HR is an output that is never tri-stated. The
host request HR is asserted to indicate that the Host
Interface is requesting service—either an interrupt request
or a DMA request—from an external device. The HR
output may be connected to interrupt request input IRQA,
IRQB, or IRQC of another DSP96002. The on-chip DMA
Controller channel of the other DSP96002 can select the
interrupt request input as a DMA transfer request input.
ABR
BBR
Output
Driven
high
Bus Request—BR is an output that is never tri-stated. BR is
asserted when the CPU or DMA is requesting bus
mastership. BR is deasserted when the CPU or DMA no
longer needs the bus. BR may be asserted or deasserted
independent of whether the DSP96002 is a bus master or a
bus slave. Bus “parking” allows BR to be deasserted even
though the DSP96002 is the bus master (see the description
of bus “parking” in the BA pin description). The RH bit in
the Bus Control Register allows BR to be asserted under
software control even though the CPU or DMA does not
need the bus. BR is typically sent to an external bus
arbitrator, which controls the priority, parking, and tenure
of each DSP96002 on the same external bus. BR is only
affected by CPU or DMA requests for the external bus,
never for the internal bus. During hardware reset, BR is
deasserted and the arbitration is reset to the Bus Slave state.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-11
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-6 Port A and Port B (Continued)
Signal
Name
Freescale Semiconductor, Inc...
ABG
BBG
Type
Input
State
During
Reset
Input,
ignored
during
reset
Signal Description
Bus Grant—BG is an input that must be asserted/
deasserted synchronous to the input clock (CLK) for proper
operation. BG is asserted by an external bus arbitration
circuit indicating the DSP96002 has become the pending
bus master. When BG is asserted, the DSP96002 must wait
until BB is deasserted before taking bus mastership. When
BG is deasserted, bus mastership is typically given up at the
end of the current bus cycle. This may occur in the middle
of an instruction, which requires more than one external
bus cycle for execution.
Note:
1-12
Indivisible read-modify-write instructions (BSET, BCLR,
BCHG) will not give up bus mastership until the end of
the current instruction. BG is ignored during hardware
reset.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-6 Port A and Port B (Continued)
Signal
Name
Freescale Semiconductor, Inc...
ABA
BBA
Type
State
During
Reset
Output
Tri-stated
Signal Description
Bus Acknowledge—BA is an open drain output. When
deasserting BA, the DSP96002 drives BA high during half a
CLK cycle and then disables the active pull-up. In this way,
only a weak external pull-up resistor is required to hold the
line high. BA may be directly connected to BB in order to
obtain the same functionality as the MC68040 BB pin. When
BG is asserted, the DSP96002 becomes the pending bus
master. It waits until BB is negated by the previous bus
master, indicating that the previous bus master is off the
bus. The pending bus master asserts BA to become the
current bus master. BA is asserted when either the CPU or
the DMA has taken the bus and is the bus master. While BA
is asserted, the DSP96002 is the owner of the bus (the bus
master). When BA is deasserted, the DSP96002 is a bus
slave. BA may be used as a tri-state enable control for
external address, data, and bus control signal buffers.
Note:
A current bus master may keep BA asserted after ceasing
bus activity, regardless of whether BR is asserted or
deasserted. This is called “bus parking” and allows the
current bus master to use the bus repeatedly without rearbitration until some other device wants the bus.
The current bus master keeps BA asserted during
indivisible read-modify-write bus cycles, regardless of
whether BG has been deasserted by the external bus
arbitration unit. This form of “bus locking” allows the
current bus master to perform atomic operations on shared
variables in multitasking and multiprocessor systems.
Current instructions that perform indivisible read-modifywrite bus cycles are BCLR, BCHG and BSET.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-13
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Port A and Port B
Table 1-6 Port A and Port B (Continued)
Signal
Name
Freescale Semiconductor, Inc...
ABB
BBB
Type
State
During
Reset
Input
Input
Signal Description
Bus Busy—BB is an input that must be asserted and
deasserted synchronous to the input clock (CLK) for proper
operation. BB is deasserted when there is no bus master on
the external bus. In multiple DSP96002 systems, all BB
inputs are tied together and are driven by the logical AND
of all BA outputs. BB is asserted when a pending bus
master becomes the current bus master (directly or
indirectly by BA assertion). BB is deasserted by the current
bus master (directly or indirectly by BA deassertion) to
indicate that it is off the bus and is no longer the bus
master. The pending bus master monitors the BB signal
until it is deasserted. Then the pending bus master asserts
BA to become the current bus master, which asserts BB
directly or indirectly.
Note:
ABL
BBL
1-14
Output
Driven
high
Use of pull-up resistors is recommended.
Bus Lock—BL is an output that is never tri-stated. Asserted
at the start of an external indivisible Read-Modify-Write
(RMW) bus cycle (providing an “early bus start” signal for
DRAM interfacing) and deasserted at the end of the write
bus cycle, BL remains asserted between the read and write
bus cycles of the read-modify-write bus sequence. BL can
be used to indicate that special memory timing (such as
RMW timing for DRAMs) may be used or to “resource
lock” an external multi-port memory for secure semaphore
updates. The early negation provides an “early bus end”
signal useful for external bus control. If the external bus is
not used during an instruction cycle, BL remains deasserted
until the next external indivisible read-modify-write bus
cycle. BL also remains deasserted if the external bus cycle is
not an indivisible read-modify-write bus cycle or if there is
an internal RMW bus cycle. The only instructions that
automatically assert BL are a BSET, BCLR or BCHG
instruction, which accesses external memory. BL can also
be asserted by setting the LH bit in the BCR.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Timer/Event Counter
TIMER/EVENT COUNTER
Table 1-7 Timer/Event Counters
Signal
Name
Freescale Semiconductor, Inc...
TIO0–
TIO1
Type
Input
or
Output
State
During
Reset
Input
Signal Description
Timer/Event Counter —The bidirectional TIO signal
connects to the on-chip Timer/Event Counter. When TIO is
used as an input, the module is functioning as an external
event counter or is measuring external pulse width/signal
period. When TIO is used as an output, the module is
functioning as a timer, and TIO becomes the timer pulse.
When the TIO pin is not used by the timer module, it can be
used as a General Purpose Input/Output (GPIO) pin.
The timer can use internal or external clocking and can
interrupt the processor after a number of events specified by
a user program, or it can signal an external device after
counting internal events. The timer can also be used to
trigger DMA transfers after a specified number of events
(clocks) occurs.
When the timer is disabled, the TIO pin becomes tri-stated.
To prevent undesired spikes from occurring, the TIO pin
should be pulled up or down when it is not in use.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-15
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
OnCE Port
OnCE PORT
Freescale Semiconductor, Inc...
Table 1-8 On-Chip Emulation Port (OnCE) Signals
Signal
Name
Signal
Type
DSI/OS0
Output
State
during
Reset
Low
Output
Signal Description
Debug Serial Input/Chip Status 0—Serial data or commands
are provided to the OnCE controller through the DSI/OS0
signal when it is an input. The data received on the DSI signal
will be recognized only when the DSP has entered the Debug
mode of operation. Data is latched on the falling edge of the
DSCK serial clock. Data is always shifted into the OnCE serial
port Most Significant Bit (MSB) first. When the DSI/OS0 signal
is an output, it works in conjunction with the OS1 signal to
provide chip status information. The DSI/OS0 signal is an
output when the processor is not in Debug mode. When
switching from output to input, the signal is tri-stated.
Note:
DSCK/
OS1
Output
Low
Output
If the OnCE interface is in use, an external pull-down resistor
should be attached to this pin. If the OnCE interface is not in
use, the resistor is not required.
Debug Serial Clock/Chip Status 1—The DSCK/OS1 signal
supplies the serial clock to the OnCE when it is an input. The
serial clock provides pulses required to shift data into and out
of the OnCE serial port. (Data is clocked into the OnCE on the
falling edge and is clocked out of the OnCE serial port on the
rising edge.) The debug serial clock frequency must be no
greater than 1/8 of the processor clock frequency. When
switching from input to output, the signal is tri-stated.
When it is an output, this signal works with the OS0 signal to
provide information about the chip status. The DSCK/OS1
signal is an output when the chip is not in Debug mode.
Note:
1-16
If the OnCE interface is in use, an external pull-down resistor
should be attached to this pin. If the OnCE interface is not in
use, the resistor is not required.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
OnCE Port
Table 1-8 On-Chip Emulation Port (OnCE) Signals (Continued)
Signal
Name
Freescale Semiconductor, Inc...
DSO
Signal
Type
Output
State
during
Reset
Output,
pulled
high
Signal Description
Debug Serial Output—Data contained in one of the OnCE
controller registers is provided through the DSO output signal,
as specified by the last command received from the external
command controller. Data is always shifted out the OnCE
serial port MSB first. Data is clocked out of the OnCE serial
port on the rising edge of DSCK.
The DSO signal also provides acknowledge pulses to the
external command controller. When the chip enters the Debug
mode, the DSO signal will be pulsed low to indicate
(acknowledge) that the OnCE is waiting for commands. After
the OnCE receives a read command, the DSO signal will be
pulsed low to indicate that the requested data is available and
the OnCE serial port is ready to receive clocks in order to
deliver the data. After the OnCE receives a write command, the
DSO signal will be pulsed low to indicate that the OnCE serial
port is ready to receive the data to be written; after the data is
written, another acknowledge pulse will be provided.
DR
Input
Input
Debug Request—The Debug Request input (DR) allows the
user to enter the Debug mode of operation from the external
command controller. When DR is asserted, it causes the DSP to
finish the current instruction being executed, save the
instruction pipeline information, enter the Debug mode, and
wait for commands to be entered from the DSI line. While in
Debug mode, the DR signal lets the user reset the OnCE
controller by asserting it and deasserting it after receiving
acknowledge. It may be necessary to reset the OnCE controller
in cases where synchronization between the OnCE controller
and external circuitry is lost. DR must be deasserted after the
OnCE responds with an acknowledge on the DSO signal and
before sending the first OnCE command. Asserting DR will
cause the chip to exit the Stop or Wait state. Having DR
asserted during the deassertion of RESET will cause the DSP to
enter Debug mode.
Note:
MOTOROLA
If the OnCE interface is not in use, attach an external pull-up
resistor to the DR input.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
1-17
Freescale Semiconductor, Inc.
Signal/Connection Descriptions
Freescale Semiconductor, Inc...
OnCE Port
1-18
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
SECTION 2
SPECIFICATIONS
Freescale Semiconductor, Inc...
INTRODUCTION
The digital signal processor (DSP) is fabricated using high-density
Complementary Metal Oxide Semiconductor (CMOS) with Transistor-TransistorLogic (TTL) compatible inputs and outputs. This section covers the maximum
ratings, thermal characteristics, and electrical characteristics of the DSP96002.
Note: Reliability of operation is enhanced if unused inputs are tied to an
appropriate logic voltage level (e.g., either GND or VCC).
MAXIMUM RATINGS
CAUTION
This device contains circuitry protecting
against damage due to high static voltage or
electrical fields; however, normal precautions
should be taken to avoid exceeding maximum
voltage ratings. Reliability is enhanced if
unused inputs are tied to an appropriate logic
voltage level (e.g., either GND or VCC).
Note: In the calculation of timing requirements, adding a maximum value of one
specification to a minimum value of another specification does not yield a
reasonable sum. A maximum specification is calculated using a worst case
variation of process parameter values in one direction. The minimum
specification is calculated using the worst case for the same parameters in
the opposite direction. Therefore, a “maximum” value for a specification
will never occur in the same device that has a “minimum” value for
another specification; adding a maximum to a minimum represents a
condition that can never exist.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-1
Freescale Semiconductor, Inc.
Specifications
Thermal Characteristics
Table 2-1 Maximum Electrical Ratings
Freescale Semiconductor, Inc...
Rating
Symbol
Value
Unit
Supply Voltage
VCC
–0.3 to +7.0
V
All Input Voltages
Vin
GND – 0.5 to VCC + 0.5
V
Current Drain per Pin
excluding VCC and VSS1
I
10
mA
Operating
Temperature Range
TJ
–40 to +100
°C
Storage Temperature
Tstg
–55 to +150
°C
Note:
GND = 0 VDC
THERMAL CHARACTERISTICS
Table 2-2 Thermal Characteristics
Symbol
PGA
Value
CQFP
Value
Unit
Junction to Ambient1
RθJA or θJA
22
31
°C/W
Junction to Case2
RθJC or θJC
5.7
1.6
°C/W
ψJT
5.2
1.0
°C/W
Characteristic
Thermal characterization parameter
Note:
1.
2.
2-2
Junction-to-ambient thermal resistance is based on measurements on a horizontal single-sided
printed circuit board per SEMI G38-87 in natural convection. SEMI is Semiconductor Equipment
and Materials International, 805 East Middlefield Road, Mountain View, CA 94043, (415) 964-5111.
Junction-to-case thermal resistance is based on measurements using a cold plate per SEMI G30-88
with the exception that the cold plate temperature is used for the case temperature.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
DC Electrical Characteristics
DC ELECTRICAL CHARACTERISTICS
Table 2-3 DC Electrical Characteristics
Characteristic1
Symbol
Min
Typical
Max
Unit
+10% at 33.3 MHz
+5% at 40 MHz
+5% at 60 MHz
VCC
4.5
4.75
4.75
5.0
5.0
5.0
5.5
5.25
5.25
V
V
V
Input High
Voltage
Except CLK, RESET
MODA,
MODB,MODC
VIH
2.0
—
VCC
V
Input Low
Voltage
Except CLK,
MODA, MODB,
MODC
VIL
–0.5
—
0.8
V
Input High
Voltage
CLK
VIHC
4.0
—
VCC
V
Input Low
Voltage
CLK
VILC
–0.5
—
0.6
V
Input High
Voltage
RESET
VIHR
2.5
—
VCC
V
Input High
Voltage
MODA, MODB,
MODC
VIHM
3.5
—
VCC
V
Input Low
Voltage
MODA, MODB,
MODC
VILM
–0.5
—
2.0
V
Iin
–10
—
10
µA
ITSI
–10
—
10
µA
VOHC
VCC –
0.1
—
—
V
VOH
2.4
—
—
V
VOLC
—
—
0.1
V
Freescale Semiconductor, Inc...
Supply Voltage,
Input Leakage
Current
—
Tri-State (OffState) Input
Current
@2.4 V/0.5 V
Output High
Voltage
IOH = –10 µA
Output High
Voltage
IOH = –0.4 mA
Output Low
Voltage
IOL = 10 µA
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-3
Freescale Semiconductor, Inc.
Specifications
DC Electrical Characteristics
Table 2-3 DC Electrical Characteristics (Continued)
Freescale Semiconductor, Inc...
Characteristic1
Symbol
Min
Typical
Max
Unit
VOL
—
—
0.4
V
Output Low
Voltage
IOL = 3.2 mA
Power
Dissipation
f = 33.3 MHz2,3
f = 40 MHz2,3
f = 60 MHz2,3
PD
—
—
—
1.0
1.25
1.75
—
—
—
W
Total Supply
Current
5 V, 33.3 MHz
Wait Mode2,3
Stop Mode2,3
IDD
IDDW
IDDS
—
—
—
200
18
80
350
26
400
mA
mA
µA
5 V, 40 MHz
Wait Mode2,3
Stop Mode2,3
IDD
IDDW
IDDS
—
—
—
250
20
100
400
34
500
mA
mA
µA
5 V, 60 MHz
Wait Mode2,3
Stop Mode2,3
IDD
IDDW
IDDS
—
—
—
350
22
300
500
40
600
mA
mA
µA
Cin
—
10
—
pF
Input
Capacitance4
Note:
1.
2.
3.
4.
2-4
—
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
PD is measured for VIL ≤ 0.2 V, VIH ≥ VCC – 0.2V. with no DC loads. CLK is driven by a 50% dutycycle oscillator.
In order to obtain these results all inputs must be terminated (i.e., not allowed to float).
Input capacitance is not tested in production.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
AC ELECTRICAL CHARACTERISTICS
The timing waveforms shown in this section are tested with the following values:
VIL maximum of 0.5 V
VIH minimum of 2.4 V for all pins1
Freescale Semiconductor, Inc...
Note:
1.
CLK, RESET, MODA, MODB, and MODC are tested using
the input levels described in DC Electrical
Characteristics on page 2-3.
AC timing specifications that are referenced to a device input signal are measured
in production with respect to the VIH/VIL levels of the respective input signal’s
transition.
AC timing specifications that are referenced to a device’s output levels are
measured with the production test machine VOL and VOH reference levels set at
0.8 V and 2.0 V, respectively. For load capacitances greater than 50pF, the drive
capability of the output pins derates linearly at 1.5 ns per 20 pF of additional
capacitance from 50 pF to 200 pF of loading, and at 2 ns per 20 pF of additional
capacitance for loads greater than 200 pF.
Pulse Width
Low
High
VIH
Input Signal
Fall Time
Note:
1.
90%
50%
10%
midpoint1
VIL
Rise Time
The midpoint is VIL + (VIH – VIL)/2
Figure 2-1 Signal Measurement Reference
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-5
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Clock Operation
The DSP96002 system clock is derived from a crystal or an external system clock
signal. The clock input is an active high input, high frequency processor clock.
The frequency is twice the instruction rate. An internal phase generator divides
CLK into four phases (t0, t1, t2 and t3), which is the basic instruction execution
cycle. Additional tw phases are optionally generated to insert Wait States (WS)
into instruction execution. A wait state is formed by pairing a t2 and tw phase.
CLK should be continuous with a 46–54% duty cycle.
Freescale Semiconductor, Inc...
Table 2-4 Clock Operation
1
2
No.
Symb.
Characteristic
33.3
MHz3
40 MHz4
60 MHz4
Unit
Min Max Min Max Min Max
Instruction Cycle Time = 2TC = 4T
Instruction Cycle Time = 2TC = 4T
Icyc
60
—
50
—
33.3
—
ns
Wait State = TC = 2T
Wait State = TC = 2T
WS
30
—
25
—
16.7
—
ns
71
CLK Cycle Time
CLK Cycle Time
Tc
30
—
25
—
16.7
—
ns
72
CLK Rise Time
—
4
—
4
—
4
ns
73
CLK Fall Time
—
4
—
4
—
4
ns
74a
CLK High
Th
14
16
11.5
13.5
7.7
9.5
ns
74b
CLK Low
Tl
14
16
11.5
13.5
7.7
9.5
ns
Note:
1.
2.
3.
4.
The numbers in this column are shown as circled numbers in the following figures.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
46%–54% Duty Cycle
46.7%–53.3% Duty Cycle
Th
VIHC
Midpoint1
VILC
CLK
Tl
74a
74b
73
72
71
Note:
1.
The midpoint is 0.5 (VCC – GND).
Figure 2-2 CLK Timing Diagram
2-6
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Arbitration Bus Timing
Table 2-5 Arbitration Bus Timing
33.3 MHz
1
40 MHz
2
No.
60 MHz
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
1
CLK High to BR Asserted /
Deasserted
2
14
2
12
2
10
ns
2
BG Valid to CLK High (Setup)
6
—
5
—
5
—
ns
3
CLK High to BG Invalid (Hold)
2
—
2
—
2
—
ns
4
CLK High to BA Asserted /
Deasserted
2
14
2
12
2
10
ns
5
BB Valid to CLK High (Setup)
6
—
5
—
4
—
ns
6
CLK High to BB Invalid (Hold)
2
—
2
—
2
—
ns
7
CLK High to A0–A31, S0–S1, R/W, BS,
TT, and BL Active
2
10
2
8
2
7
ns
8
A0–A31, S0–S1, R/W, BS, and TT tristate to BA Deasserted
0
—
0
—
0
—
ns
9
CLK High to A0–A31, S0–S1, R/W, BS,
and TS tri-state
2
12
2
10
2
8
ns
9a
CLK Low to BA tri-state
2
12
2
10
2
8
ns
Note:
1.
The numbers in this column are shown as circled numbers in the following figures.
2.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-7
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
1
BR
(output)
3
2
Freescale Semiconductor, Inc...
BG
(input)
BB
(input)
5
6
BA
(output)
(Tri-state)
4
7
A0–A31,
R/W,
S0–S1,
BS, TT, BL
(output)
(Tri-state)
TS
(output)
WR
write cycle
(Tri-state)
31
41
Figure 2-3 Bus Acquisition Timing
2-8
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
1
BR
(output)
2
BG
(input)
3
4
9a
Freescale Semiconductor, Inc...
BA
(output)
(Tri-state)
8
A0–A31,
R/W,
S0–S1
(output)
(Tri-state)
9
39
BS
(output)
9
(Tri-state)
43
TS
(output)
(Tri-state)
9
42
43a
WR
write cycle
(Tri-state)
42a
9
Figure 2-4 Bus Release Timing
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-9
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
External Bus Relative Timing
Table 2-6 External Bus Relative Timing
1
No.
33.3 MHz3
2
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
10
A0–A31, S0–S1, R/W Valid to TS
Asserted
Expression:
105
166
7.55
13.56
4.05
9.56
ns
11
A0–A31, S0–S1, R/W Valid to TS
Deasserted
427
—
33.58
—
25.08
—
ns
12
TS Width Asserted
309
—
259
—
179
—
ns
12a
WR Width Asserted
2727
—
2227
—
1527
—
ns
13
TS Deasserted to R/W, A0–A31
Invalid
610
—
6.511
—
6.511
—
ns
13a
WR Deasserted to R/W, A0–A31
Invalid
6
—
3.5
—
2.5
—
ns
14
TS Width Deasserted
2112
—
1813
—
1613
—
ns
14a
WR Width Deasserted
18
—
15
—
10
—
ns
15
TS Asserted to D0–D31 Valid (Write
Cycle)
—
2014
—
17.514
—
1514
ns
16
D0–D31 Valid to TS Deasserted (Write
Cycle)
1215
—
8.516
—
616
—
ns
16a
D0–D31 Valid to WR Deasserted
(Write Cycle)
1228
—
1029
—
6.529
—
ns
17
TS Deasserted to D0–D31 Invalid
(Write Cycle)
610
—
6.511
—
6.511
—
ns
17a
WR Deasserted to D0–D31 Invalid
(Write Cycle)
6
—
3.5
—
2.5
—
ns
18
TS Asserted to D0–D31 Active (Write
Cycle)
1017
—
1018
—
7.718
—
ns
19
TS Deasserted to D0–D31 Tri–state
(Write Cycle)
—
1619
—
13.519
—
1119
ns
2-10
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Table 2-6 External Bus Relative Timing (Continued)
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
19a
WR Deasserted to D0–D31 Three-state
(Write Cycle)
20
TS Deasserted to D0–D31 Active
(Write Cycle)
21
—
1619
—
13.519
—
1119
ns
3520
—
31.521
—
26.521
—
ns
TS Asserted to D0–D31 Valid (Read
Cycle)
—
2122
—
17.523
—
1423
ns
22
TS Deasserted to D0–D31 Invalid
(Hold) (Read Cycle)
0
—
0
—
0
—
ns
23
A0–A31, S0–S1, R/W Valid to D0–D31
Valid (Read Cycle)24
—
3225
—
26.526
—
2126
ns
Note:
1.
The numbers in this column are shown as circled numbers in the following figures.
2.
3.
4.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND= 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
Assuming duty cycle in the range 46.7%–53.3% and no wait states
Assuming duty cycle in the range 46%–54% and no wait states
5.
6.
7.
8.
9.
10.
11.
12.
Th–4
Th
(WS + 1)Tc + Th–2
(WS + 1)Tc + Th – 3
(WS + 1)Tc
Tl – 8
Tl – 5
Tc – 9
MOTOROLA
13.
14.
15.
16.
17.
18.
19.
20.
21.
Tc – 7
Tl + 4
(WS)Tc + Th – 2
(WS)Tc + Th – 3
Tl – 4
Tl – 1.5
Tl
Tc + Tl – 9
Tc + Tl – 5
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
22.
23.
24.
25.
26.
27.
28.
29.
(WS + 1)Tc – 9
(WS + 1)Tc – 7.5
Using Th minimum
(WS + 1)Tc + Th – 12
(WS + 1)Tc + Th – 10
Tc – 3
Th – 2
Th – 1.5
2-11
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
A0–A31,
S0–S1
(output)
(see note)
23
11
R/W
(output)
10
10
13
TS
(output)
19
Freescale Semiconductor, Inc...
17
16
15
D0–D31
13
14
12
DATA OUT
(Tri-state)
22
21
(Tri-state)
DATA IN
(Tri-state)
18
20
17a
14a
16a
WR
19a
10
12a
13a
11
Note: During Read-Modify-Write instructions, A0–A31, S0–S1 do not change.
Figure 2-5 External Bus Relative Timing
2-12
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
External Bus Synchronous Timing
Table 2-7 External Bus Synchronous Timing
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
31
CLK High to A0–A31, S0–S1, R/W
Valid and TT, BS, BL Asserted
2
14
2
12
2
10
ns
32
CLK High to A0–A31, S0–S1, R/W
Invalid
2
—
1.5
—
1.5
—
ns
33
CLK High to D0–D31 Valid (Write
Cycle)
2
14
2
12
2
10
ns
34
CLK High to D0–D31 Invalid (Write
Cycle)
2
—
1.5
—
1.5
—
ns
35
CLK High to D0–D31 Active (Write
Cycle)
2
—
1.5
—
1.5
—
ns
36
CLK High to D0–D31 Three-state
(Write Cycle)
—
12
—
10
—
8.5
ns
37
D0–D31 Valid to CLK Low (Setup)
(Read Cycle)
0
—
0
—
0
—
ns
38
CLK Low to D0–D31 Invalid (Hold)
(Read Cycle)
11
—
9
—
7
—
ns
39
CLK High to TT, BS, BL Deasserted
2
14
2
12
2
10
ns
40
BS, TT Width Deasserted
256
—
217
—
16.57
—
ns
41
CLK Low to TS Asserted
2
11
1.5
9.5
1.5
8
ns
41a
CLK High TS tri-state
2
11
1.5
9.5
1.5
8
ns
42
TS Hold Time from CLK Low
2
—
1.5
—
1.0
—
ns
42a
WR Hold Time from CLK Low
1.5
—
1.5
—
1.0
—
ns
43
CLK Low to TS Deasserted
—
16
—
13
—
9
ns
43a
CLK Low to WR Deasserted
—
19
—
16
—
13
ns
44
TS Deasserted to BS Asserted (Two
Successive Bus Cycles)
78
—
6.59
—
6.59
—
ns
44a
WR Deasserted to BS Asserted (Two
Successive Bus Cycles)
—
6
—
3.5
—
3.
ns
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-13
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Table 2-7 External Bus Synchronous Timing (Continued)
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
45
BS Asserted to TA Asserted5.
—
1510
—
12.511
—
9.511
ns
46
TA Valid to CLK High (Setup)5.
3
—
3
—
3
—
ns
47
CLK High to TA Invalid (Hold)
8
—
7
—
6
—
ns
Note:
2-14
1.
2.
The numbers in this column are shown as circled numbers in the following figures.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
3. Assuming duty cycle in the range 46.7%–53.3% and no wait states
4. Assuming duty cycle in the range 46%–54% and no wait states
5. Timing 45 or timing 46 should be satisfied.
6. Tc–5
7. Tc–4
8. Tl–7
9. Tl–5
10. Tc–15
11. Tc–12.5
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
31
32
A0–A31,
R/W,
S0–S1
(output)
39
40
BS, TT
(output)
44
Freescale Semiconductor, Inc...
41
43
TS
(output)
42
45
WR
(output)
47
44a
43a
41a
42a
TA
(input)
46
34
33
D0–D31
(output)
37
35
36
38
D0–D31
(input)
Figure 2-6 External Bus Synchronous Timing—No Wait States
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-15
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
31
32
A0–A31,
R/W,
S0–S1,
(output)
39
40
BS, TT
(output)
44
Freescale Semiconductor, Inc...
41
43
TS
(output)
42a
41a
43a
WR
(output)
44a
42
46
46
TA
(input)
47
47
Figure 2-7 External Bus Synchronous Timing—One Wait State
2-16
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
32
31
A0–A31,
S0–S1
(output)
R/W
(output)
39
Freescale Semiconductor, Inc...
31
39
40
BS, TT
(output)
44
41
43
TS
(output)
31
43a
39
42
44a
WR
(output)
41a
42a
BL
(output)
39
Figure 2-8 Read-Modify-Write Cycle Timing—No Wait States
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-17
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Multiplexed Bus Timing
Table 2-8 Multiplexed Bus Timing
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
51
AE Asserted to CLK Low5
8
146
6.5
11.56
5.5
96
ns
52
AE Asserted to A0–A31 Valid
2
14
2
12
2
10
ns
53
AE Deasserted to A0–A31 tri-state
2
12
2
10
1.5
8
ns
54
AE Deasserted to A0–A31 Invalid
2
—
2
—
1.5
—
ns
55
AE Asserted to CLK High7
0
128
0
9.59
0
79
ns
56
AE Asserted to A0–A31 Active
1
—
1
—
1
—
ns
57
CLK High to A0–A31 Active
2
—
1.5
—
1.5
—
ns
61
DE Asserted to CLK Low5, 10
8
146
6.5
11.56
5.5
96
ns
62
DE Asserted to D0–D31 Valid
14
2
2
12
2
10
ns
63
DE Deasserted to D0–D31 Tri-state
2
12
2
10
1.5
8
ns
64
DE Deasserted to D0–D31 Invalid
2
—
2
—
1.5
—
ns
65
DE Asserted to CLK High7, 10
0
128
0
9.59
0
79
ns
66
DE Asserted to D0–D31 Active
1
—
1
—
1
—
ns
Note:
2-18
1.
The numbers in this column are shown as circled numbers in the following figures.
2.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
3.
4.
5.
6.
7.
8.
9.
10.
Assuming duty cycle in the range 46.7%–53.3%
Assuming duty cycle in the range 46%–54%
Th minimum
Th
Tl minimum
Tl–4
Tl–2
For Host Interface data output, only timings 62, 63, 64, and 66 apply.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
51
55
AE
(input)
52
53
56
54
53
31
54
57
Freescale Semiconductor, Inc...
A0–A31
(output)
Figure 2-9 Address Bus Enable/Disable Timing
CLK
(input)
61
65
DE
(input)
62
66
D0–D31
(output)
63
63
33
64
35
64
Figure 2-10 Data Bus Enable/Disable Timing
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-19
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Host Timing
Table 2-9 Host Timing
1
No.
33.3 MHz3
2
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
101
A2–A5, R/W Valid to TS Asserted
(Setup)
10
—
7
—
5
—
ns
102
TS Deasserted to A2–A5, R/W Invalid
(Hold)
0
—
0
—
0
—
ns
103
TS Asserted to D0–D31 Out Valid
TS Asserted to D0–D31 Out Valid5
—
—
186
100
—
—
16
88
—
—
13.5
74
ns
ns
104
TS, HA Deasserted to D0–D31 Out
Invalid (Hold)
2
—
2
—
2
—
ns
105
TS, HA Asserted to D0–D31 Out
Active
3
—
3
—
3
—
ns
106
TS, HA Deasserted to D0–D31 Tri-state
—
18
—
16
—
14
ns
—
306
—
25
—
20
ns
107
A2–A5, R/W Valid to D0–D31 Valid to
D0–D31 Out Valid
A2–A5, R/W Valid to D0–D31 Valid to
D0–D31 Out Valid5
—
100
—
88
—
74
ns
108
HS, HA Asserted to D0–D31 Out Valid
(Access Time)
HS, HA Asserted to D0–D31 Out
Valid5
—
216
—
20
—
17
ns
109
D0–D31 In Valid to TS, HA Deasserted
(Setup)
8
—
6
—
5
—
ns
110
TS, HA Deasserted to D0–D31 In
Invalid (Hold)
5
—
4
—
3.5
—
ns
111
TS Width Asserted5
16
—
14
—
12
—
ns
TS Width Deasserted Between
Consecutive TX Writes8
TS, HA Width Deasserted (Others)11
—
79
—
64.5
—
51.5
ns
112
—
12
—
10
—
9
ns
113
HS Asserted to TS Deasserted
24
—
21
—
17
—
ns
114
HS Hold Time After TS Deasserted
0
—
0
—
0
—
ns
2-20
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Table 2-9 Host Timing (Continued)
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
115
HS, HA Deasserted to TS Asserted
(Setup)
1
—
0
—
0
—
ns
118
HA Width Asserted (DMA Mode)
24
—
21
—
18
—
ns
120
CLK Low to HR Asserted
—
14
—
12
—
10
ns
121
TS, HA Asserted to HR Deasserted
—
30
—
25
—
21
ns
122
CLK Low to HR Asserted After TS
Deassertion12
60
—
50
—
40
—
ns
123
TS, HA Deasserted to CLK Low
(Setup)14
13
30
11
25
9.5
20
ns
Note:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
The numbers in this column are shown as circled numbers in the following figures.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
Assuming duty cycle in the range 46.7%–53.3%
Assuming duty cycle in the range 46%–54%
When reading status (ICS register), the status data is guaranteed to be stable.
2Tc + 40
2Tc + 38
Assuming both TX and HRX empty
2Tc + Tl + 5
2Tc + Tl + 3
Both TS and HA must be deasserted in case of mixed DMA / non-DMA accesses (i.e., after any
access this recovery time must be respected before a new access.)
When TS deassertion was in respect to timing 123
2Tc
When timing 123 is respected, timing 122 is guaranteed to be respected. Timing 123 is not required
for correct operation.
Tc
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-21
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
A2–A5
(input)
102
R/W
(input)
107
114
108
HS
(input)
115
Freescale Semiconductor, Inc...
101
111
112
TS
(input)
106
103
104
105
D0–D31
(output)
Figure 2-11 Host Read Cycle Timing (Non-DMA Mode)
A2–A5
(input)
102
R/W
(input)
114
113
HS
(input)
115
101
111
112
TS
(input)
109
110
D0–D31
(input)
Figure 2-12 Host Write Cycle Timing (Non-DMA Mode)
2-22
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
121
HR
(output)
112
118
HA
(input)
106
108
D0–D31
(output)
Freescale Semiconductor, Inc...
104
105
Figure 2-13 Host Read Cycle Timing (DMA Mode)
121
HR
(output)
112
118
HA
(input)
110
109
D0–D31
(input)
Figure 2-14 Host Write Cycle Timing (DMA Mode)
R/W
(input)
102
114
107
HA
(input)
115
108
112
111
TS
(input)
106
103
104
D0–D31
(output)
105
Figure 2-15 Host Interrupt Vector Register (IVR) Read Timing (Non-DMA Mode)
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-23
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
123
TS, HA
(input)
120
122
121
Freescale Semiconductor, Inc...
HR
(output)
Figure 2-16 Host Request Timing
2-24
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
OnCE Timing
Table 2-10 OnCE Timing
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
130
DSCK Low
40
—
40
—
40
—
ns
131
DSCK High
40
—
40
—
35
—
ns
132
DSCK Cycle Time
240
—
200
—
160
—
ns
133
DR Asserted to DSO (ACK) Asserted
1525
—
1266
—
1056
—
ns
134
DSCK High to DSO Valid
51
—
42
—
34
—
ns
135
DSCK High to DSO Invalid
6
—
5
—
4
—
ns
136
DSI Valid to DSCK Low (Setup)
17
—
15
—
13
—
ns
137
DSCK Low to DSI Invalid (Hold)
6
—
5
—
4
—
ns
138
Last DSCK Low to OS0–OS1, ACK
Active
747
—
61.57
—
507
—
ns
139
DSO (ACK) Asserted to First DSCK
High8
819
—
67.510
—
5410
—
ns
140
DSO (ACK) Width Asserted
4011
6812
33.513
5714
27
46
ns
141
DSO (ACK) Asserted to OS0–OS1 Tristate
—
0
—
0
—
0
ns
142
OS0–OS1 Valid to CLK High
1015
—
816
—
7
—
ns
143
CLK High to OS0–OS1 Invalid
4
—
3
—
2
—
ns
144
Last DSCK Low of Read Register to
First
DSCK High of Next Command19
22217
—
185.518
—
14818
—
ns
145
Last DSCK Low to DSO Invalid (Hold)
6
—
5
—
4
—
ns
146
DSCK Rise and Fall Times
50
ns
MOTOROLA
60
60
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-25
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Table 2-10 OnCE Timing (Continued)
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Min Max Min Max Min Max
Freescale Semiconductor, Inc...
Note:
1.
2.
3.
4.
The numbers in this column are shown as circled numbers in the following figures.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
Assuming duty cycle in the range 46.7%–53.3%
Assuming duty cycle in the range 46%–54%
5.
6.
7.
8.
9.
10.
11.
12.
5Tc + 2
5Tc + 1
2Tc + Tl
Tl maximum.
2Tc + Tl + 5
2Tc + Tl + 4
Tc + Tl – 4
2Tc + 8
13.
14.
15.
16.
17.
18.
19.
146
146
DSCK
(input)
Tc + Tl – 3
2Tc + 7
Tc – 20
Tc – 17
6Tc + Th + 26
6Tc + Th + 22
Th maximum
130
131
132
Figure 2-17 OnCE Serial Clock Timing
DR
(input)
133
DSO
(output)
ACK
Figure 2-18 OnCE Acknowledge Timing
2-26
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
DSCK
(input)
(OS1)
(Last)
(Note 1)
134
145
135
DSO
(output)
(ACK)
DSI
(input)
(OS0)
Freescale Semiconductor, Inc...
136
138
137
Note: Tri-state, external pull-down resistor
Figure 2-19 OnCE Data I/O to Status Timing
139
OS1
(output)
(Note 1)
(DSCK input)
134
140
DSO
(output)
(ACK)
(DSO output)
OS0
(output)
(DSI input)
136
141
137
Note: Tri-state, external pull-down resistor
Figure 2-20 OnCE Status to Data I/O Timing
CLK
(input)
142
OS0-1
(output)
143
Figure 2-21 OnCE CLK to Status Timing
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-27
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
DSCK
(input)
(Next Command)
(Read Register)
144
Figure 2-22 OnCE DSCK Next Command After Read Register Timing
Freescale Semiconductor, Inc...
Reset, Mode Select, Interrupt Timing
Table 2-11 Reset, Mode Select, Interrupt Timing
No.1
33.3 MHz3
Characteristic2
40 MHz4
60 MHz4
Unit
Min Max Min
Max
Min
Max
160
RESET Asserted to D0–D31, A0–A31,
S0–S1, R/W, BS, TT, TS, BA Threestate
—
709
—
6010
—
50
ns
161
RESET Asserted to BL, BR, HR
Deasserted
—
10011
—
8512
—
60
ns
162
RESET Width Asserted5
60013
—
50013
—
40013
—
ns
163
Asynchronous RESET Deassertion to
First External Access
30014
36515
25014
30516
20014
24516
ns
164
Synchronous Reset Setup Time from
RESET Deassertion to CLK High
6
2517
5
2017
4
1617
ns
165
Synchronous Reset Delay from CLK
High to First External Access7
24218
25419
20218
21220
16218
170
ns
166
Mode Select Setup Time
50
—
50
—
40
—
ns
167
Mode Select Hold Time
0
—
0
—
0
—
ns
168
Edge-Triggered Interrupt Request
Width
10
—
10
—
10
—
ns
169
Delay from IRQA, IRQB, or IRQC
assertion to External Memory Access
Out Valid Caused by First Interrupt
Instruction Execution6
28421
—
236.521
—
18921
—
ns
2-28
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Table 2-11 Reset, Mode Select, Interrupt Timing (Continued)
1
No.
170
Freescale Semiconductor, Inc...
Note:
33.3 MHz3
2
40 MHz4
60 MHz4
Unit
Characteristic
Delay from A0–A31, S0–S1, R/W, BS,
and TT Valid Caused by First
Interrupt Instruction Execution to
IRQA, IRQB, IRQC Deassertion8
Min Max Min
Max
Min
Max
3022
2523
—
2023
—
—
ns
1.
The numbers in this column are shown as circled numbers in the following figures.
2.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
3.
4.
5.
Assuming duty cycle in the range 46.7%–53.3% and no wait states
Assuming duty cycle in the range 46%–54%% and no wait states
Assuming stable CLK and VCC
6.
Assuming a single-cycle MOVE instruction in the first vector location, interrupting a stream of oneword, single-cycle instructions
7.
Assuming BG asserted and BB deasserted
8.
This timing is necessary to prevent multiple interrupt service when the interrupt request is a levelsensitive fast interrupt. To avoid this restriction, Edge-triggered mode is recommended when
using fast interrupts and long interrupts are recommended when using Level-sensitive mode
9.
10.
11.
12.
13.
Tc + 40
Tc + 35
2Tc + 40
2Tc + 35
20Tc
MOTOROLA
14.
15.
16.
17.
18.
10Tc
11Tc + 35
11Tc + 30
Tc – 5
8Tc + 2
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
19.
20.
21.
22.
23.
8Tc + 14
8Tc + 12
9Tc + Tl
(WS + 2)Tc – 30
(WS + 2)Tc – 25
2-29
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
VIHR
162
RESET
(input)
161
Freescale Semiconductor, Inc...
BL, BR,
HR
(output)
160
D0–D31,
A0–A31,
S0–S1,
R/W, BS,
TT, TS, BA
(output)
Figure 2-23 Reset Entry Timing
VIHR
RESET
(input)
163
Bus Signals
(output)
First Fetch
Figure 2-24 Asynchronous Reset Exit Timing
CLK
(input)
164
VIHR
RESET
(input)
165
Bus Signals
(output)
First Fetch
Figure 2-25 Synchronous Reset Exit Timing
2-30
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
VIHR
162
RESET
(input)
167
166
MODA,
MODB,
MODC
(input)
VIHM
VIH
VILM
IRQA, IRQB, IRQC
VIL
Freescale Semiconductor, Inc...
Figure 2-26 Operating Mode Select Timing
IRQA,
IRQB,
IRQC
(input)
168
169
A0–A31,
S0–S1,
R/W, BS,
TT
(output)
First Interrupt Instruction Execution
Note: Reset, Mode Select, Interrupt Figure 5
Figure 2-27 External Edge-Triggered Interrupt Timing
IRQA,
IRQB,
IRQC
(input)
A0–A31,
S0–S1,
R/W, BS,
TT
(output)
169
170
First Interrupt Instruction Execution
Figure 2-28 External Level-Sensitive Interrupt Timing
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-31
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
WAIT, STOP, DMA Request Timing
Table 2-12 WAIT, STOP, DMA Request Timing
1
No.
33.3 MHz3
2
40 MHz4
60 MHz4
Unit
Characteristic
Freescale Semiconductor, Inc...
Min Max Min Max Min Max
180
IRQA, IRQB, IRQC Asserted to CLK
Low (Setup Time for Synchronous
Recovery from WAIT State)
12
30
181
CLK Low to External Memory Access
Valid (First Interrupt Instruction Fetch
After Synchronous Recovery from
WAIT State)5
4067
4208
182
IRQA, IRQB, IRQC Width Asserted
(Recovery from WAIT State)
3510
—
183
IRQA, IRQB, IRQC Asserted to
External Memory Access Valid (First
Interrupt Instruction Fetch After
Asynchronous Recovery from WAIT
State)5
4067
184
IRQA Asserted to CLK Low (Setup
Time for Synchronous Recovery from
STOP State)
8
185
CLK Low to External Memory Access
Valid (First Instruction Fetch After
Synchronous Recovery from STOP
State)5
37614
186
IRQA Width Asserted (Recovery from
Stop State)
3522
187
IRQA Asserted to External Memory
Access Valid (First Instruction Fetch
After Asynchronous Recovery from
STOP State)5)
37614
188
DR Asserted to CLK Low (Setup Time
for Synchronous Recovery from WAIT
or STOP State)
2-32
8
10
25
8
17
ns
2717
2819
ns
2010
—
ns
46611 338.57 388.512 2717
311
ns
3013
2013
ns
261
ns
2522
—
ns
43617 313.514 363.518 25114
291
ns
3013
2013
ns
338.57 350.59
3010
7
—
2513
5.5
39015 313.514 325.516 25114
—
3022
7
—
2513
5.5
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
Table 2-12 WAIT, STOP, DMA Request Timing (Continued)
1
33.3 MHz3
2
No.
40 MHz4
60 MHz4
Unit
Characteristic
Min Max Min Max Min Max
Freescale Semiconductor, Inc...
189
190
CLK Low to DSO (ACK) Valid (Enter
Debug Mode)
• After Synchronous Recovery
from STOP State
• After Synchronous Recovery
from WAIT State
DR Asserted to DSO (ACK) Valid
(Enter Debug Mode)
• After Asynchronous Recovery
from STOP State
• After Asynchronous Recovery
from WAIT State
54019
—
45019
—
30519
—
ns
51020
—
42520
—
29020
—
ns
54019
—
45019
—
30519
—
ns
51020
—
42520
—
29020
—
ns
191
DMA Request Asserted to CLK Low
(Setup)6
6
—
5
—
5
—
ns
192
CLK Low to DMA Request Invalid
(Hold)6
2
—
2
—
1.5
—
ns
193
CLK Low to External DMA Access
Valid
7621
—
63.521
—
5021
—
ns
194
DR Assertion Width
• To recover from WAIT/STOP
• To recover from WAIT/STOP
and enter Debug Mode
3522
42025
30023
—
2924
35025
25023
—
2324
23525
20023
—
ns
ns
Note:
1.
The numbers in this column are shown as circled numbers in the following figures.
2.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, GND = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, GND = 0 V DC, TJ = –40°C to 100°C
3.
4.
5.
6.
Assuming duty cycle in the range 46.7%–53.3% and no wait states.
Assuming duty cycle in the range 46%–54%% and no wait states.
Assuming bus ownership.
IRQ pin internally defined as DMA request.
7.
8.
9.
10.
11.
12.
13.
13Tc + Tl + 2
13Tc + Tl + 14
13Tc + Tl + 12
Tc + 5
14Tc + Tl + 30
14Tc + Tl + 25
Tc
MOTOROLA
14.
15.
16.
17.
18.
19.
20.
12Tc + Tl + 2
12Tc + Tl + 14
12Tc + Tl + 12
13Tc + Tl + 30
13Tc + Tl + 25
18Tc
17Tc
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
21.
22.
23.
24.
25.
2Tc + Tl + 2
Tc + 5
10Tc
Tc + 4
14Tc
2-33
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
IRQA,
IRQB,
IRQC
(input)
180
181
Freescale Semiconductor, Inc...
A0–A31,
S0–S1,
R/W, BS,
TT
(output)
First Interrupt Instruction Fetch
Figure 2-29 Recovery from WAIT State Using Synchronous Interrupt Timing
IRQA,
IRQB,
IRQC
(input)
182
183
A0–A31,
S0–S1,
R/W, BS,
TT
(output)
First Interrupt Instruction Fetch
Figure 2-30 Recovery from WAIT State Using Asynchronous Interrupt Timing
CLK
(input)
184
IRQA
(input)
A0–A31,
S0–S1,
R/W, BS,
TT
(output)
185
First Instruction Fetch
Figure 2-31 Recovery from STOP State Using Synchronous Interrupt Timing
2-34
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
186
IRQA
(input)
187
A0–A31,
S0–S1,
R/W, BS,
TT
(output)
First Instruction Fetch
Freescale Semiconductor, Inc...
Figure 2-32 Recovery from STOP State Using Asynchronous Interrupt Timing
CLK
(input)
194
DR
(input)
188
189
DSO
(output)
ACK
Figure 2-33 Recovery from WAIT/STOP State Using Synchronous DR Timing
DR
(input)
194
190
DSO
(output)
ACK
Figure 2-34 Recovery from WAIT/STOP State Using Asynchronous DR Timing
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-35
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
CLK
(input)
192
IRQA,
IRQB,
IRQC
(input)
191
193
Freescale Semiconductor, Inc...
A0–A31,
S0–S1,
R/W, BS,
TT
(output)
DMA Access
Figure 2-35 External DMA Request Timing
Timer/Event Counter
Table 2-13 Timer Timing
No.1
33.3 MHz3
Characteristic2
40 MHz4
60 MHz4
Unit
Min Max Min Max Min Max
260
TIO Low
2Tc
—
2Tc
—
2Tc
—
ns
261
TIO High
2Tc
—
2Tc
—
2Tc
—
ns
262
CKOUT to TIO (output) assertion
2
18
2
15
2
12
ns
263
CKOUT to TIO (output) deassertion
2
18
2
15
2
12
ns
Note:
2-36
1.
The numbers in this column are shown as circled numbers in the following figures.
2.
DC Electrical Characteristics:
at 33.3 MHz:
VCC = 5.0 V ± 10%, VSS = 0 V DC, TJ = –40°C to 100°C
at 40 or 60 MHz: VCC = 5.0 V ± 5%, VSS = 0 V DC, TJ = –40°C to 100°C
3.
4.
Assuming duty cycle in the range 46.7%–53.3% and no wait states.
Assuming duty cycle in the range 46%–54%% and no wait states.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Specifications
AC Electrical Characteristics
TIO
261
260
Freescale Semiconductor, Inc...
Figure 2-36 TIO Timer Event Input Restrictions
CKOUT
TIO
(output)
262
263
Figure 2-37 External Pulse Generation
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
2-37
Freescale Semiconductor, Inc.
Specifications
Freescale Semiconductor, Inc...
AC Electrical Characteristics
2-38
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
SECTION 3
PACKAGING
Freescale Semiconductor, Inc...
This section contains package and pin-out information for the DSP96002. There
are two package options: 223-pin Pin Grid Array (PGA) or 240-pin Ceramic Quad
Flat Pack (CQFP).
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-1
Freescale Semiconductor, Inc.
Packaging
PGA Package
PGA PACKAGE
Freescale Semiconductor, Inc...
1
2
6
7
11
12
13
A
BA23 BA27 BA29 BA31 IRQA ABB
ABR
TIO0
ATS
AAE
AA02 AA04 AA07 AA10 AA13 AA16
A
B
BA20 BA25 BA28 BA30 IRQB ABG
ABA
BTT
AS1
ABS
AA00 AA03 AA06 AA09 AA11 AA14 AA18 AA20
B
C
BA17 BA21 BA26 GNDN IRQC RES
ABL
ATT
AWR
AA01 AA05 AA08 AA12 AA15 AA17 AA19 AA21 AA23
C
D
BA15 BA18 BA24
GNDN GNDN GNDN VCCN VCCN VCCQ GNDQ VCCN GNDN GNDN GNDN AA22 AA25 AA26
D
E
BA13 BA16 BA22 GNDN
GNDN AA24 AA28 AA29
E
F
BA12 BA14 BA19 GNDN
GNDN AA27 AA30 AD31
F
G
BA09 BA10 VCCN VCCN
GNDN AA31 AD30 AD29
G
H
BA08 CLK
BA11 VCCQ
VCCN AD28 AD27 AD26
H
J
ATA
BA07 GNDQ
GNDQ AD24 AD25 AD23
J
K
BA04 BA05 BA06 VCCN
GNDQ AD20 AD21 AD22
K
L
BA03 BA01 BA02 VCCN
VCCQ AD16 AD18 AD19
L
M
BA00 BS1
VCCN VCCN ADE
AD17
M
N
BAE
P
BR/W BTS
R
BBS
T
BTA
3
4
5
8
9
10
AR/W AS0
14
DSP96002
223 PIN
PGA
TOP VIEW
Top View
15
16
17
18
BS0
GNDN
TIO1 BWR
GNDN
GNDN AD11 AD14 AD15
N
BBL
GNDN
GNDN AD07 AD12 AD13
P
BBR
BBB
GNDN GNDN GNDN VCCN GNDQ VCCQ VCCQ VCCN GNDN GNDN GNDN GNDN AD05 AD09 AD10
R
BBG
BBA
AHR
DR
U
BHR
V
DSO
1
AHS
BD31 GNDN BD26 BD22 BD17 BD14 BD11 BD07 BD04 BD01 AD02 AD06 AD08
T
DSCK NC(1) AHA
BDE
BD29 BD27 BD24 BD21 BD18 BD15 BD12 BD09 BD06 BD03 BD00 AD03 AD04
U
DSI
BHA
BHS
BD30 BD28 BD25 BD23 BD20 BD19 BD16 BD13 BD10 BD08 BD05 BD02 AD00 AD01
V
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Figure 3-1 Top View of the DSP96002 223-pin PGA Package
3-2
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
18
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
1
2
3
4
BHA
BHS
5
6
7
8
9
10
11
12
13
14
15
16
17
18
BD30 BD28 BD25 BD23 BD20 BD19 BD16 BD13 BD10 BD08 BD05 BD02 AD00 AD01
V
DSCK NC(1) AHA
BDE
BD29 BD27 BD24 BD21 BD18 BD15 BD12 BD09 BD06 BD03 BD00 AD03 AD04
U
BBG
BBA
AHR
DR
AHS
BD31 GNDN BD26 BD22 BD17 BD14 BD11 BD07 BD04 BD01 AD02 AD06 AD08
T
R
BBS
BBR
BBB
GNDN GNDN GNDN VCCN GNDQ VCCQ VCCQ VCCN GNDN GNDN GNDN GNDN AD05 AD09 AD10
R
P
BR/W BTS
BBL
GNDN
GNDN AD07 AD12 AD13
P
N
BAE
TIO1
BWR
GNDN
GNDN AD11 AD14 AD15
N
M
BA00 BS1
BS0
GNDN
VCCN VCCN ADE
AD17
M
L
BA03 BA01 BA02 VCCN
VCCQ AD16 AD18 AD19
L
K
BA04 BA05 BA06 VCCN
GNDQ AD20 AD21 AD22
K
J
ATA
GNDQ AD24 AD25 AD23
J
H
BA08 CLK
VCCN AD28 AD27 AD26
H
G
BA09 BA10 VCCN VCCN
GNDN AA31 AD30 AD29
G
F
BA12 BA14 BA19 GNDN
GNDN AA27 AA30 AD31
F
E
BA13 BA16 BA22 GNDN
GNDN AA24 AA28 AA29
E
D
BA15 BA18 BA24
GNDN GNDN GNDN VCCN VCCN VCCQ GNDQ VCCN GNDN GNDN GNDN AA22 AA25 AA26
D
C
BA17 BA21 BA26 GNDN IRQC RES
ABL
ATT
AWR
AA01 AA05 AA08 AA12 AA15 AA17 AA19 AA21 AA23
C
B
BA20 BA25 BA28 BA30 IRQB ABG
ABA
BTT
AS1
ABS
AA00 AA03 AA06 AA09 AA11 AA14 AA18 AA20
B
A
BA23 BA27 BA29 BA31 IRQA ABB
ABR
TIO0
ATS
AAE
AA02 AA04 AA07 AA10 AA13 AA16
A
7
8
11
12
13
V
DSO
DSI
U
BHR
T
1
BTA
2
DSP96002
223 PINS
PGA
BOTTOM VIEW
BA07 GNDQ
BA11 VCCQ
3
4
Bottom View
5
6
AR/W AS0
9
10
14
15
16
17
Figure 3-2 Bottom View of the DSP96002 223-pin PGA Package
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-3
18
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
Table 3-1 DSP96002 Pin List, 223-pin PGA Package
3-4
Pin
Number
Signal Type
A1
Input/Output
BA23
A2
Input/Output
BA27
A3
Input/Output
BA29
A4
Input/Output
BA31
A5
Input
MODA/IRQA
A6
Input
ABB
A7
Output
ABR
A8
Input/Output
TIO0
A9
Input/Output
AR/W
A10
Output
AS0
A11
Input/Output
ATS
A12
Input
AAE
A13
Input/Output
AA02
A14
Input/Output
AA04
A15
Input/Output
AA07
A16
Input/Output
AA10
A17
Input/Output
AA13
A18
Input/Output
AA16
B1
Input/Output
BA20
B2
Input/Output
BA25
B3
Input/Output
BA28
B4
Input/Output
BA30
B5
Input
MODB/IRQB
B6
Input
ABG
B7
Output
ABA
B8
Output
BTT
B9
Output
AS1
B10
Output
ABS
B11
Input/Output
AA00
B12
Input/Output
AA03
B13
Input/Output
AA06
B14
Input/Output
AA09
B15
Input/Output
AA11
B16
Input/Output
AA14
B17
Input/Output
AA18
Signal Name
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
Table 3-1 DSP96002 Pin List, 223-pin PGA Package (Continued)
MOTOROLA
Pin
Number
Signal Type
B18
Input/Output
AA20
C1
Input/Output
BA17
C2
Input/Output
BA21
C3
Input/Output
BA26
C4
Input
GNDN
C5
Input
MODC/IRQC
C6
Input
RESET
C7
Output
ABL
C8
Output
ATT
C9
Output
AWR
C10
Input/Output
AA01
C11
Input/Output
AA05
C12
Input/Output
AA08
C13
Input/Output
AA12
C14
Input/Output
AA15
C15
Input/Output
AA17
C16
Input/Output
AA19
C17
Input/Output
AA21
C18
Input/Output
AA23
D1
Input/Output
BA15
D2
Input/Output
BA18
D3
Input/Output
BA24
D5
Input
GNDN
D6
Input
GNDN
D7
Input
GNDN
D8
Input
VCCN
D9
Input
VCCN
D10
Input
VCCQ
D11
Input
GNDN
D12
Input
VCCN
D13
Input
GNDN
D14
Input
GNDN
D15
Input
GNDN
D16
Input/Output
AA22
D17
Input/Output
AA25
D18
Input/Output
AA26
Signal Name
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-5
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
Table 3-1 DSP96002 Pin List, 223-pin PGA Package (Continued)
3-6
Pin
Number
Signal Type
E1
Input/Output
BA13
E2
Input/Output
BA16
E3
Input/Output
BA22
E4
Input
GNDN
E15
Input
GNDN
E16
Input/Output
AA24
E17
Input/Output
AA28
E18
Input/Output
AA29
F1
Input/Output
BA12
F2
Input/Output
BA14
F3
Input/Output
BA19
F4
Input
GNDN
F15
Input
GNDN
F16
Input/Output
AA27
F17
Input/Output
AA30
F18
Input/Output
AD31
G1
Input/Output
BA09
G2
Input/Output
BA10
G3
Input
VCCN
G4
Input
VCCN
G15
Input
GNDN
G16
Input/Output
AA31
G17
Input/Output
AD30
G18
Input/Output
AD29
H1
Input/Output
BA08
H2
Input
CLK
H3
Input/Output
BA11
H4
Input
VCCQ
H15
Input
VCCN
H16
Input/Output
AD28
H17
Input/Output
AD27
H18
Input/Output
AD26
J1
Input
ATA
J2
Input
BTA
J3
Input/Output
BA07
J4
Input
Signal Name
GNDQ
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
Table 3-1 DSP96002 Pin List, 223-pin PGA Package (Continued)
MOTOROLA
Pin
Number
Signal Type
J15
Input
GNDQ
J16
Input/Output
AD24
J17
Input/Output
AD25
J18
Input/Output
AD23
K1
Input/Output
BA04
K2
Input/Output
BA05
K3
Input/Output
BA06
K4
Input
VCCN
K15
Input
GNDQ
K16
Input/Output
AD20
K17
Input/Output
AD21
K18
Input/Output
AD22
L1
Input/Output
BA03
L2
Input/Output
BA01
L3
Input/Output
BA02
L4
Input
VCCN
L15
Input
VCCQ
L16
Input/Output
AD16
L17
Input/Output
AD18
L18
Input/Output
AD19
M1
Input/Output
BA00
M2
Output
BS1
M3
Output
BS0
M4
Input
GNDN
M15
Input
VCCN
M16
Input
VCCN
M17
Input
ADE
M18
Input/Output
AD17
N1
Input
BAE
N2
Output
TIO1
N3
Input/Output
BWR
N4
Input
GNDN
N15
Input
GNDN
N16
Input/Output
AD11
N17
Input/Output
AD14
N18
Input/Output
AD15
Signal Name
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-7
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
Table 3-1 DSP96002 Pin List, 223-pin PGA Package (Continued)
3-8
Pin
Number
Signal Type
P1
Input/Output
BR/W
P2
Input/Output
BTS
P3
Output
BBL
P4
Input
GNDN
P15
Input
GNDN
P16
Input/Output
AD07
P17
Input/Output
AD12
P18
Input/Output
AD13
R1
Output
BBS
R2
Output
BBR
R3
Input
BBB
R4
Input
GNDN
R5
Input
GNDN
R6
Input
GNDN
R7
Input
VCCN
R8
Input
GNDQ
R9
Input
VCCQ
R10
Input
VCCQ
R11
Input
VCCN
R12
Input
GNDN
R13
Input
GNDN
R14
Input
GNDN
R15
Input
GNDN
R16
Input/Output
AD05
R17
Input/Output
AD09
R18
Input/Output
AD10
T1
Input
BBG
T2
Output
BBA
T3
Output
AHR
T4
Input
DR
T5
Input
AHS
T6
Input/Output
BD31
T7
Input
T8
Input/Output
BD26
T9
Input/Output
BD22
T10
Input/Output
BD17
Signal Name
GNDN
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
Table 3-1 DSP96002 Pin List, 223-pin PGA Package (Continued)
MOTOROLA
Pin
Number
Signal Type
T11
Input/Output
BD14
T12
Input/Output
BD11
T13
Input/Output
BD07
T14
Input/Output
BD04
T15
Input/Output
BD01
T16
Input/Output
AD02
T17
Input/Output
AD06
T18
Input/Output
AD08
U1
Output
BHR
U2
Input/Output
U3
N/A
NC1
U4
Input
AHA
U5
Input
BDE
U6
Input/Output
BD29
U7
Input/Output
BD27
U8
Input/Output
BD24
U9
Input/Output
BD21
U10
Input/Output
BD18
U11
Input/Output
BD15
U12
Input/Output
BD12
U13
Input/Output
BD09
U14
Input/Output
BD06
U15
Input/Output
BD03
U16
Input/Output
BD00
U17
Input/Output
AD03
U18
Input/Output
AD04
V1
Output
DSO
V2
Input/Output
V3
Input
BHA
V4
Input
BHS
V5
Input/Output
BD30
V6
Input/Output
BD28
V7
Input/Output
BD25
V8
Input/Output
BD23
Signal Name
DSCK/OS1
DSI/OS0
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-9
Freescale Semiconductor, Inc.
Packaging
PGA Package
Freescale Semiconductor, Inc...
Table 3-1 DSP96002 Pin List, 223-pin PGA Package (Continued)
Pin
Number
Signal Type
V9
Input/Output
BD20
V10
Input/Output
BD19
V11
Input/Output
BD16
V12
Input/Output
BD13
V13
Input/Output
BD10
V14
Input/Output
BD08
V15
Input/Output
BD05
V16
Input/Output
BD02
V17
Input/Output
AD00
V18
Input/Output
AD01
Signal Name
-TA
-E-
H
L
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
B
-F-
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
G
G
H
DIM
A
B
C
D
G
H
L
INCHES
MIN
MAX
1.840 1.880
1.840 1.880
0.120
0.150
0.017 0.020
0.100 BSC
0.050 BSC
0.170 0.190
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
C
223X
D
0.030 M T E S F S
0.010 M T
CASE 860C-02
ISSUE A
Figure 3-3 DSP96002 Mechanical Information, 223-pin PGA Package
3-10
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
CQFP Package
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Orientation Mark
(Top View)
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
162
161
160
159
158
157
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
NC
NC
NC
BBA
GNDN
BHR
AHR
DSO
DSCK
DSI
DR
NC
BHA
AHA
BHS
AHS
BDE
BD31
BD30
BD29
BD28
GNDN
BD27
BD26
BD25
BD24
VCCN
BD23
BD22
BD21
BD20
GNDN
BD19
BD18
BD17
BD16
VCCQ
GNDQ
BD15
BD14
BD13
BD12
GNDN
BD11
BD10
BD09
BD08
VCCN
BD07
BD06
BD05
BD04
GNDN
BD03
BD02
BD01
BD00
NC
NC
NC
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
NC
NC
NC
BA28
BA29
BA30
BA31
MODC
MODB
MODA
RES
ABG
ABB
ABR
ABA
ABL
GNDN
TIO0
VCCN
BTT
ATT
ARW
AWR
GNDN
AS1
AS0
ATS
ABS
AAE
AA00
AA01
AA02
AA03
GNDN
AA04
AA05
AA06
AA07
GNDQ
VCCQ
VCCN
AA08
AA09
AA10
AA11
GNDN
AA12
AA13
AA14
AA15
AA16
AA17
AA18
AA19
GNDN
AA20
AA21
NC
NC
NC
NC
NC
NC
AA22
AA23
VCCN
AA24
AA25
AA26
AA27
GNDN
AA28
AA29
AA30
AA31
AD31
AD30
AD29
AD28
GNDN
AD27
AD26
AD25
AD24
VCCN
AD23
AD22
AD21
AD20
GNDN
AD19
AD18
AD17
AD16
VCCQ
GNDQ
AD15
/ADE
AD14
AD13
AD12
GNDN
AD11
AD10
AD09
AD08
VCCN
AD07
AD06
AD05
AD04
GNDN
AD03
AD02
AD01
AD00
NC
NC
NC
NC
Freescale Semiconductor, Inc...
240
239
238
237
236
235
234
233
232
231
230
229
228
227
226
225
224
223
222
221
220
219
218
217
216
215
214
213
212
211
210
209
208
207
206
205
204
203
202
201
200
199
198
197
196
195
194
193
192
191
190
189
188
187
186
185
184
183
182
181
NC
NC
NC
GNDN
BA27
BA26
BA25
BA24
VCCN
BA23
BA22
BA21
BA20
GNDN
BA19
BA18
BA17
BA16
BA15
BA14
BA13
BA12
GNDN
BA11
BA10
BA09
BA08
VCCQ
CLK
GNDQ
VCCN
BA07
BTA
ATA
BA06
BA05
BA04
GNDN
BA03
BA02
BA01
BA00
BAE
BS1
BS0
BRW
TIO1
GNDN
BWR
BTS
BBS
VCCN
BBL
BBR
BBG
BBB
NC
NC
NC
NC
CQFP PACKAGE
Figure 3-4 Top View of the DSP96002 240-pin CQFP Package
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-11
Freescale Semiconductor, Inc.
Packaging
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
162
161
160
159
158
157
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Orientation Mark
(on top side)
(Bottom View)
NC
NC
NC
BA28
BA29
BA30
BA31
MODC
MODB
MODA
RES
ABG
ABB
ABR
ABA
ABL
GNDN
TIO0
VCCN
BTT
ATT
ARW
AWR
GNDN
AS1
AS0
ATS
ABS
AAE
AA00
AA01
AA02
AA03
GNDN
AA04
AA05
AA06
AA07
GNDQ
VCCQ
VCCN
AA08
AA09
AA10
AA11
GNDN
AA12
AA13
AA14
AA15
AA16
AA17
AA18
AA19
GNDN
AA20
AA21
NC
NC
NC
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
NC
NC
NC
BBA
GNDN
BHR
AHR
DSO
DSCK
DSI
DR
NC
BHA
AHA
BHS
AHS
BDE
BD31
BD30
BD29
BD28
GNDN
BD27
BD26
BD25
BD24
VCCN
BD23
BD22
BD21
BD20
GNDN
BD19
BD18
BD17
BD16
VCCQ
GNDQ
BD15
BD14
BD13
BD12
GNDN
BD11
BD10
BD09
BD08
VCCN
BD07
BD06
BD05
BD04
GNDN
BD03
BD02
BD01
BD00
NC
NC
NC
NC
NC
NC
NC
AD00
AD01
AD02
AD03
GNDN
AD04
AD05
AD06
AD07
VCCN
AD08
AD09
AD10
AD11
GNDN
AD12
AD13
AD14
/ADE
AD15
GNDQ
VCCQ
AD16
AD17
AD18
AD19
GNDN
AD20
AD21
AD22
AD23
VCCN
AD24
AD25
AD26
AD27
GNDN
AD28
AD29
AD30
AD31
AA31
AA30
AA29
AA28
GNDN
AA27
AA26
AA25
AA24
VCCN
AA23
AA22
NC
NC
NC
Freescale Semiconductor, Inc...
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
NC
NC
NC
NC
BBB
BBG
BBR
BBL
VCCN
BBS
BTS
BWR
GNDN
TIO1
BRW
BS0
BS1
BAE
BA00
BA01
BA02
BA03
GNDN
BA04
BA05
BA06
ATA
BTA
BA07
VCCN
GNDQ
CLK
VCCQ
BA08
BA09
BA10
BA11
GNDN
BA12
BA13
BA14
BA15
BA16
BA17
BA18
BA19
GNDN
BA20
BA21
BA22
BA23
VCCN
BA24
BA25
BA26
BA27
GNDN
NC
NC
NC
CQFP Package
Figure 3-5 Bottom View of the DSP96002 240-pin CQFP Package
3-12
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
CQFP Package
Freescale Semiconductor, Inc...
Table 3-2 DSP96002 Pin List, 240-pin CQFP Package
MOTOROLA
Pin
Number
Signal Type
1
N/A
NC
2
N/A
NC
3
N/A
NC
4
Input/Output
BA28
5
Input/Output
BA29
6
Input/Output
BA30
7
Input/Output
BA31
8
Input
IRQC/MODC
9
Input
IRQB/MODB
10
Input
IRQA/MODA
11
Input
RESET
12
Input
ABG
13
Input
ABB
14
Output
ABR
15
Output
ABA
16
Output
ABL
17
Input
18
Input/Output
TIO0
19
Input
VCCN
20
Output
BTT
21
Output
ATT
22
Output
AR/W
23
Output
AWR
24
Input
GNDN
25
Output
AS1
26
Output
AS0
27
Input/Output
ATS
28
Output
ABS
29
Input
AAE
30
Input/Output
AA00
31
Input/Output
AA01
32
Input/Output
AA02
33
Input/Output
AA03
34
Input
GNDN
Signal Name
GNDN
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-13
Freescale Semiconductor, Inc.
Packaging
CQFP Package
Freescale Semiconductor, Inc...
Table 3-2 DSP96002 Pin List, 240-pin CQFP Package (Continued)
3-14
Pin
Number
Signal Type
35
Input/Output
AA04
36
Input/Output
AA05
37
Input/Output
AA06
38
Input/Output
AA07
39
Input
GNDQ
40
Input
VCCQ
41
Input
VCCN
42
Input/Output
AA08
43
Input/Output
AA09
44
Input/Output
AA10
45
Input/Output
AA11
46
Input
GNDN
47
Input/Output
AA12
48
Input/Output
AA13
49
Input/Output
AA14
50
Input/Output
AA15
51
Input/Output
AA16
52
Input/Output
AA17
53
Input/Output
AA18
54
Input/Output
AA19
55
Input
GNDN
56
Input/Output
AA20
57
Input/Output
AA21
58
N/A
NC
59
N/A
NC
60
N/A
NC
61
N/A
NC
62
N/A
NC
63
N/A
NC
64
Input/Output
AA22
65
Input/Output
AA23
66
Input
VCCN
67
Input/Output
AA24
68
Input/Output
AA25
69
Input/Output
AA26
Signal Name
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
CQFP Package
Freescale Semiconductor, Inc...
Table 3-2 DSP96002 Pin List, 240-pin CQFP Package (Continued)
MOTOROLA
Pin
Number
Signal Type
70
Input/Output
AA27
71
Input
GNDN
72
Input/Output
AA28
73
Input/Output
AA29
74
Input/Output
AA30
75
Input/Output
AA31
76
Input/Output
AD31
77
Input/Output
AD30
78
Input/Output
AD29
79
Input/Output
AD28
80
Input
GNDN
81
Input/Output
AD27
82
Input/Output
AD26
83
Input/Output
AD25
84
Input/Output
AD24
85
Input
VCCN
86
Input/Output
AD23
87
Input/Output
AD22
88
Input/Output
AD21
89
Input/Output
AD20
90
Input
GNDN
91
Input/Output
AD19
92
Input/Output
AD18
93
Input/Output
AD17
94
Input/Output
AD16
95
Input
VCCQ
96
Input
GNDQ
97
Input/Output
AD15
98
Input
ADE
99
Input/Output
AD14
100
Input/Output
AD13
101
Input/Output
AD12
102
Input
GNDN
103
Input/Output
AD11
Signal Name
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-15
Freescale Semiconductor, Inc.
Packaging
CQFP Package
Freescale Semiconductor, Inc...
Table 3-2 DSP96002 Pin List, 240-pin CQFP Package (Continued)
3-16
Pin
Number
Signal Type
104
Input/Output
AD10
105
Input/Output
AD09
106
Input/Output
AD08
107
Input
VCCN
108
Input/Output
AD07
109
Input/Output
AD06
110
Input/Output
AD05
111
Input/Output
AD04
112
Input
GNDN
113
Input/Output
AD03
114
Input/Output
AD02
115
Input/Output
AD01
116
Input/Output
AD00
117
N/A
NC
118
N/A
NC
119
N/A
NC
120
N/A
NC
121
N/A
NC
122
N/A
NC
123
N/A
NC
124
Input/Output
BD00
125
Input/Output
BD01
126
Input/Output
BD02
127
Input/Output
BD03
128
Input
129
Input/Output
BD04
130
Input/Output
BD05
131
Input/Output
BD06
132
Input/Output
BD07
133
Input
VCCN
134
Input/Output
BD08
135
Input/Output
BD09
136
Input/Output
BD10
137
Input/Output
BD11
138
Input
139
Input/Output
Signal Name
GNDN
GNDN
BD12
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
CQFP Package
Freescale Semiconductor, Inc...
Table 3-2 DSP96002 Pin List, 240-pin CQFP Package (Continued)
MOTOROLA
Pin
Number
Signal Type
140
Input/Output
BD13
141
Input/Output
BD14
142
Input/Output
BD15
143
Input
GNDQ
144
Input
VCCQ
145
Input/Output
BD16
146
Input/Output
BD17
147
Input/Output
BD18
148
Input/Output
BD19
149
Input
150
Input/Output
BD20
151
Input/Output
BD21
152
Input/Output
BD22
153
Input/Output
BD23
154
Input
VCCN
155
Input/Output
BD24
156
Input/Output
BD25
157
Input/Output
BD26
158
Input/Output
BD27
159
Input
160
Input/Output
BD28
161
Input/Output
BD29
162
Input/Output
BD30
163
Input/Output
BD31
164
Input
BDE
165
Input
AHS
166
Input
BHS
167
Input
AHA
168
Input
BHA
169
N/A
NC
170
Input
DR
171
Input/Output
DSI/OS0
172
Input/Output
DSK/OS1
173
Output
DSO
174
Output
AHR
175
Output
BHR
Signal Name
GNDN
GNDN
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-17
Freescale Semiconductor, Inc.
Packaging
CQFP Package
Freescale Semiconductor, Inc...
Table 3-2 DSP96002 Pin List, 240-pin CQFP Package (Continued)
3-18
Pin
Number
Signal Type
176
Input
177
Output
BBA
178
N/A
NC
179
N/A
NC
180
N/A
NC
181
N/A
NC
182
N/A
NC
183
N/A
NC
184
N/A
NC
185
Input
BBB
186
Input
BBG
187
Output
BBR
188
Output
BBL
189
Input
190
Output
BBS
191
Input/Output
BTS
192
Output
BWR
193
Input
194
Input/Output
195
Output
BR/W
196
Output
BS0
197
Output
BS1
198
Input
BAE
199
Output
BA00
200
Output
BA01
201
Output
BA02
202
Output
BA03
203
Input
204
Output
BA04
205
Output
BA05
206
Output
BA06
207
Input
ATA
208
Input
BTA
209
Output
BA07
210
Input
VCCN
Signal Name
GNDN
VCCN
GNDN
TIO1
GNDN
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
CQFP Package
Freescale Semiconductor, Inc...
Table 3-2 DSP96002 Pin List, 240-pin CQFP Package (Continued)
MOTOROLA
Pin
Number
Signal Type
211
Input
GNDQ
212
Input
CLK
213
Input
VCCQ
214
Output
BA08
215
Output
BA09
216
Output
BA10
217
Output
BA11
218
Input
219
Output
BA12
220
Output
BA13
221
Output
BA14
222
Output
BA15
223
Output
BA16
224
Output
BA17
225
Output
BA18
226
Output
BA19
227
Input
228
Output
BA20
229
Output
BA21
230
Output
BA22
231
Output
BA23
232
Input
VCCN
233
Output
BA24
234
Output
BA25
235
Output
BA26
236
Output
BA27
237
Input
GNDN
238
N/A
NC
239
N/A
NC
240
N/A
NC
Signal Name
GNDN
GNDN
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-19
Freescale Semiconductor, Inc.
Packaging
CQFP Package
S
U
180
AD
VIEW AC
121
4 PLACES
181
AD
G
120
P
X
Y
X = L, M OR N
VIEW AC
N
L
Freescale Semiconductor, Inc...
V
F
B
Z
J
D
0.08 M T L-N M
61
240
SECTION AD
1
240 PLACES
60
M
A
4X 6 0 TIPS
0.30 T L-N M
0.20 M H L-N M
C
H
VIEW AE
E
T
W
NOTES:
1. ALL DIMENSIONS AND TOLERANCES CONFORM
TO ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DATUM PLANE H IS LOCATED AT BOTTOM OF
LEADS WHERE THEY EXIT THE BODY.
1. 4. DATUMS L, M, AND N TO BE DETERMINED AT
DATUM PLANE H.
2. 5. DIMENSIONS S AND V TO BE DETERMINED AT
SEATING PLANE DATUM T.
3. 6. DIMENSIONS A AND B DEFINE MAXIMUM
CERAMIC BODY DIMENSIONS INCLUDING GLASS
PROTRUSION AND TOP AND BOTTOM MISMATCH.
0.10 T
SEATING
PLANE
(AB)
θ1
R
θ2
(R)
K
(AA)
VIEW AE
CASE 988-01
ISSUE E
DIM
A
B
C
D
E
F
G
J
K
P
R
S
U
V
W
Y
Z
AA
AB
θ1
θ2
MILLIMETERS
MIN
MAX
30.86 31.75
30.86 31.75
3.75
4.15
0.18
0.30
3.10
3.90
0.17
0.23
0.50 BSC
0.13 0.175
0.45
0.55
0.25 BSC
0.15 BSC
34.60 BSC
17.30 BSC
34.60 BSC
0.04
0.24
17.30 BSC
0.12
0.13
1.80 REF
0.95 REF
6°
2°
1°
7°
Figure 3-6 DSP96002 Mechanical Information, 240-pin CQFP Package
3-20
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Packaging
Package and Pin-Out Information
PACKAGE AND PIN-OUT INFORMATION
Complete mechanical information regarding DSP96002 packaging is available by
facsimile through Motorola's Mfax™ system. Call the following number to obtain
information by facsimile:
(602) 244-6591
Freescale Semiconductor, Inc...
The Mfax automated system requests the following information:
•
The receiving facsimile telephone number including area code or country
code
•
The caller’s Personal Identification Number (PIN)
Note: For first time callers, the system provides instructions for setting up a PIN,
which requires entry of a name and telephone number.
•
The type of information requested:
–
Instructions for using the system
–
A literature order form
–
Specific part technical information or data sheets
–
Other information described by the system messages
A total of three documents may be ordered per call.
The mechanical drawings for the 223-pin PGA package are referenced as 860C-02.
The mechanical drawings for the 240-pin CQFP package are referenced as 988-01.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
3-21
Freescale Semiconductor, Inc.
Packaging
Freescale Semiconductor, Inc...
Package and Pin-Out Information
3-22
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
SECTION 4
DESIGN CONSIDERATIONS
Freescale Semiconductor, Inc...
THERMAL DESIGN CONSIDERATIONS
An estimation of the chip junction temperature, TJ, in °C can be obtained from the
equation:
Equation 1: T J = T A + ( P D × R θJA )
Where:
TA = ambient temperature ˚C
RθJA = package junction-to-ambient thermal resistance ˚C/W
PD = power dissipation in package
Historically, thermal resistance has been expressed as the sum of a junction-tocase thermal resistance and a case-to-ambient thermal resistance:
Equation 2: R θJA = R θJC + R θCA
Where:
RθJA = package junction-to-ambient thermal resistance ˚C/W
RθJC = package junction-to-case thermal resistance ˚C/W
RθCA = package case-to-ambient thermal resistance ˚C/W
RθJC is device-related and cannot be influenced by the user. The user controls the
thermal environment to change the case-to-ambient thermal resistance, RθCA. For
example, the user can change the air flow around the device, add a heat sink,
change the mounting arrangement on the printed circuit board, or otherwise
change the thermal dissipation capability of the area surrounding the device on a
printed circuit board. This model is most useful for ceramic packages with heat
sinks; some 90% of the heat flow is dissipated through the case to the heat sink
and out to the ambient environment. For ceramic packages, in situations where
the heat flow is split between a path to the case and an alternate path through the
printed circuit board, analysis of the device thermal performance may need the
additional modeling capability of a system level thermal simulation tool.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
4-1
Freescale Semiconductor, Inc.
Design Considerations
Thermal Design Considerations
The thermal performance of plastic packages is more dependent on the
temperature of the printed circuit board to which the package is mounted. Again,
if the estimations obtained from RθJA do not satisfactorily answer whether the
thermal performance is adequate, a system level model may be appropriate.
Freescale Semiconductor, Inc...
A complicating factor is the existence of three common ways for determining the
junction-to-case thermal resistance in plastic packages:
•
To minimize temperature variation across the surface, the thermal
resistance is measured from the junction to the outside surface of the
package (case) closest to the chip mounting area when that surface has a
proper heat sink.
•
To define a value approximately equal to a junction-to-board thermal
resistance, the thermal resistance is measured from the junction to where
the leads are attached to the case.
•
If the temperature of the package case (TT) is determined by a
thermocouple, the thermal resistance is computed using the value
obtained by the equation (TJ – TT)/PD.
As noted above, the junction-to-case thermal resistances quoted in this data sheet
are determined using the first definition. From a practical standpoint, that value
is also suitable for determining the junction temperature from a case
thermocouple reading in forced convection environments. In natural convection,
using the junction-to-case thermal resistance to estimate junction temperature
from a thermocouple reading on the case of the package will estimate a junction
temperature slightly hotter than actual temperature. Hence, the new thermal
metric, Thermal Characterization Parameter or ΨJT, has been defined to be
(TJ – TT)/PD. This value gives a better estimate of the junction temperature in
natural convection when using the surface temperature of the package.
Remember that surface temperature readings of packages are subject to
significant errors caused by inadequate attachment of the sensor to the surface,
and to errors caused by heat loss to the sensor. The recommended technique is to
attach a 40-gauge thermocouple wire and bead to the top center of the package
with thermally conductive epoxy.
4-2
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Design Considerations
Electrical Design Considerations
ELECTRICAL DESIGN CONSIDERATIONS
Freescale Semiconductor, Inc...
CAUTION
This device contains protective circuitry to
guard against damage due to high static
voltage or electrical fields. However, normal
precautions are advised to avoid application
of any voltages higher than maximum rated
voltages to this high-impedance circuit.
Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Use the following list of recommendations to assure correct DSP operation:
MOTOROLA
•
Provide a low-impedance path from the board power supply to each VCC
pin on the DSP, and from the board ground to each GND pin.
•
Use at least six 0.01–0.1 µF bypass capacitors positioned as close as
possible to the four sides of the package to connect the VCC power source
to GND.
•
Ensure that capacitor leads and associated printed circuit traces that
connect to the chip VCC and GND pins are less than 0.5” per capacitor
lead.
•
Use at least a four-layer Printed Circuit Board (PCB) with two inner layers
for VCC and GND.
•
Because the DSP output signals have fast rise and fall times, PCB trace
lengths should be minimal. This recommendation particularly applies to
the address and data buses, as well as the IRQA, IRQB, IRQC, TA, TS, BG,
HS, and HA pins. Maximum PCB trace lengths on the order of 6" are
recommended.
•
Consider all device loads, as well as parasitic capacitance due to PCB
traces when calculating capacitance. This is especially critical in systems
with higher capacitive loads that could create higher transient currents in
the VCC and GND circuits.
•
All inputs must be terminated (i.e., not allowed to float) using CMOS
levels.
•
Take special care to minimize noise levels on the VCCPLL and VSSPLL pins.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
4-3
Freescale Semiconductor, Inc.
Design Considerations
Power Consumption Considerations
POWER CONSUMPTION CONSIDERATIONS
Power dissipation is a key issue in portable DSP applications. Some of the factors
that affect current consumption are described in this section. Most of the current
consumed by CMOS devices is Alternating Current (AC), which is charging and
discharging the capacitances of the pins and internal nodes.
Current consumption is described by the formula:
Freescale Semiconductor, Inc...
Equation 3: I = C × V × f
where:
C = node/pin capacitance
V = voltage swing
f = frequency of node/pin toggle
Example 4-1 Current Consumption
For an I/O pin loaded with 50 pF capacitance, operating at 5.5 V, and with a 60 MHz clock, toggling
at its maximum possible rate (30 MHz), the current consumption is:
Equation 4:
I = 50 × 10
– 12
6
× 5.5 × 30 × 10 = 8.25 mA
The Maximum Internal Current (ICCImax) value reflects the typical possible
switching of the internal buses on best-case operation conditions, which is not
necessarily a real application case. The Typical Internal Current (ICCItyp) value
reflects the average switching of the internal buses on typical operating
conditions.
For applications that require very low current consumption:
4-4
•
Minimize the number of pins that are switching.
•
Minimize the capacitive load on the pins.
•
Connect the unused inputs to pull-up or pull-down resistors.
•
Disable unused peripherals.
•
Disable unused pin activity.
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Design Considerations
Power-Up Considerations
POWER-UP CONSIDERATIONS
Freescale Semiconductor, Inc...
To power-up the device properly, ensure that the following conditions are met:
•
Stable power is applied to the device according to the specifications in
Table 2-3 (DC Electrical Characteristics).
•
The external clock oscillator is active and stable.
•
RESET is asserted according to the specifications in Table 2-7 (Reset, Stop,
Mode Select, and Interrupt Timing).
Care should be taken to ensure that the maximum ratings for all input voltages
obey the restrictions on Table 2-1 (Maximum Ratings), at all phases of the powerup procedure. This may be achieved by powering the external clock, hardware
reset, and mode selection circuits from the same power supply that is connected
to the power supply pins of the chip.
At the beginning of the hardware reset procedure, the device might consume
significantly more current than the specified typical supply current. This is
because of contentions among the internal nodes being affected by the hardware
reset signal until they reach their final hardware reset state.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
4-5
Freescale Semiconductor, Inc.
Design Considerations
Freescale Semiconductor, Inc...
Power-Up Considerations
4-6
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
SECTION 5
ORDERING INFORMATION
Consult a Motorola Semiconductor sales office or authorized distributor to
determine product availability and to place an order.
Freescale Semiconductor, Inc...
Table 5-1 Ordering Information
Part
Supply
Voltage
Package Type
Pin Grid Array
(PGA)
DSP96002
223
5V
Ceramic Quad Flat
Pack (CQFP)
MOTOROLA
Pin
Count
Frequency
(MHz)
Order Number
60
DSP96002RC60
40
DSP96002RC40
33
DSP96002RC33
60
DSP96002FE60
40
DSP96002FE40
240
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
5-1
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc...
Ordering Information
5-2
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
APPENDIX A
Freescale Semiconductor, Inc...
BOOTSTRAP CODE FOR DSP96002
; BOOTSTRAP CODE FOR DSP96002 -  Copyright 1988 Motorola Inc.
;
; Host algorithm / AND / external bus method.
;
; This is the Bootstrap program contained in the DSP96002. This program
; can load the internal program memory from one of 4 external sources.
; The program reads the OMR bits MA and MB to decide which external
; source to access.
; If MB:MA = 0X - load from 4,096 consecutive byte-wide P: memory
; locations (starting at P:$FFFF0000).
; If MB:MA = 10 - load internal PRAM thru Host Interface in Port A.
; If MB:MA = 11 - load internal PRAM thru Host Interface in Port B.
BOOT
EQU
$FFFF0000; The location in P: memory
; where the external byte-wide
; EPROM is expected to be mapped
M_HCRA
EQU
$FFFFFFEC; Port A Host Control Register
M_HSRA
EQU
$FFFFFFED; Port A Host Status Register
M_HRXA
EQU
$FFFFFFEF; Port A Host Rec. Data Register
M_HCRB
EQU
$FFFFFFE4; Port B Host Control Register
M_HSRB
EQU
$FFFFFFE5; Port B Host Status Register
M_HRXB
EQU
$FFFFFFE7; Port B Host Rec. Data Register
ORG
PL:$0; bootstrap code starts at P:$0
START
MOVE
#BOOT,R1; R1 = External P: address of
; bootstrap byte-wide ROM
MOVEI
#0,R0
; R0 = starting P: address of
; internal memory where program
; will begin loading.
; If this program is entered by changing the OMR to bootstrap mode,
; make certain that registers M0 and M1 have been set to $FFFFFFFF.
; Make sure the appropriate BCR register is set to $xxxxxxFx since
; EPROMs are slow.
; Make sure that the Port Selection Register is set to permit program
; memory accesses thru the required memory expansion port (Port A or B).
;
; The first routine will load 4,096 bytes from the external P memory
; space beginning at P:$FFFF0000 (bits 7-0). These will be condensed
; into 1,024 32-bit words and stored in contiguous internal PRAM memory
; locations starting at P:$0. Note that the first routine loads data
; starting with the least significant byte of P:$0 first.
; The Port Selection Register is not set by this program. It is set
; by HW Reset.
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
A-1
Freescale Semiconductor, Inc.
Bootstrap Code for DSP96002
Freescale Semiconductor, Inc...
;
;
;
;
;
;
;
;
;
;
;
;
;
The second routine loads the internal PRAM using the Host
Interface logic.
If HF1=0, it will load 4,096 bytes from the external host processor.
These will be condensed into 1,024 32-bit words and stored in
contiguous internal PRAM memory locations starting at P:$0. Note that
the routine loads data starting with the least significant byte of
P:$0 first.
If HF1=1, it will load 1,024 32-bit words from the external host
processor.
If the host processor only wants to load a portion of the P memory,
and start execution of the loaded program, the Host Interface
bootstrap load program routine may be killed by setting HF0 = 0.
INLOOP
DO
#1024,_LOOP1; Load 1,024 instruction words
; This is the context switch
JSET
#1,OMR,_HOSTLD; Perform load from Host
; Interface if MB=1.
; This is the first routine. It loads from external P: memory.
DO
#4,_LOOP2; Get 4 bytes into D0.L
LSR
#8,D0; Shift previous byte down
MOVEM
P:(R1)+,D1.L; Get byte from ext. P mem.
LSL
#24,D1; Shift into upper byte
OR
D1,D0; concatenate
_LOOP2 JMP
<_STORE; Then put the word in P memory
;
; This is the second routine. It loads thru the Host Interface.
_HOSTLD
JSET
#0,OMR,_HOSTB; Port A or Port B?
; Boot thru Host Interface in Port A
_HOSTA
BCLR
#5,X:M_HCRA; Enable Port A Host Interface
MOVE
#M_HSRA,R2; R2 points to HSRA
MOVE
#M_HRXA,R3; R3 points to HRXA
JMP
<_HOSTR; go to host routine
; Boot thru Host Interface in Port B
_HOSTB
BCLR
#5,X:M_HCRB; Enable Port B Host Interface
MOVE
#M_HSRB,R2; R2 points to HSRB
MOVE
#M_HRXB,R3; R3 points to HRXB
A-2
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
Bootstrap Code for DSP96002
; Host load routine
_HOSTR
_LBL11
JCLR
#3,X:(R2),_LBL22; if HF0=1, stop loading data.
ENDDO
; Must terminate the do loops
JMP
<_BOOTEND
Freescale Semiconductor, Inc...
_LBL22
JCLR
MOVE
JMP
#0,X:(R2),_LBL11; Wait for HRDF to go high
; (meaning data is present).
#4,X:(R2),_LBL33; 8-bit source?
X:(R3),D0.L; Get 32-bit word from host
<_STORE
_LBL33
DO
LSR
#4,_LOOP4; Get 4 bytes into D0.L
#8,D0; Shift previous byte down
_LBL1
JCLR
ENDDO
ENDDO
JMP
JCLR
#3,X:(R2),_LBL2; if HF0=1, stop loading data.
; Must terminate the do loops
_LBL2
JCLR
MOVE
LSL
OR
<_BOOTEND
#0,X:(R2),_LBL1; Wait for HRDF to go high
; (meaning data is present).
X:(R3),D1.L; Get byte from host
#24,D1; Shift into upper byte
D1,D0; concatenate
MOVEM
D0.L,P:(R0)+ ; Store 32-bit result in P mem.
_LOOP4
_STORE
_LOOP1
; and go get another 32-bit word
; This is the exit handler that returns execution to internal PRAM
_BOOTEND ANDI
#$F9,OMR
; Set the operating mode to 00x
; (and trigger an exit from
; bootstrap mode).
ANDI
#$0,CCR; Clear CCR as if HW RESET.
; Also delay needed for
; Op. Mode change.
JMP
<$0; Start fetching from PRAM.
; DSP96002 bootstrap program size = 50 words
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
A-3
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc...
Bootstrap Code for DSP96002
A-4
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
APPENDIX B
X AND Y MEMORY ROM TABLES
Freescale Semiconductor, Inc...
Table B-1 X Memory ROM Contents (full cycle of cosine values)
xr:$00000400= $3f800000
$3f7ffec4
$3f7ffb11
$3f7ff4e6
xr:$00000404= $3f7fec43
$3f7fe129
$3f7fd397
$3f7fc38f
xr:$00000408= $3f7fb10f
$3f7f9c18
$3f7f84ab
$3f7f6ac7
xr:$0000040c= $3f7f4e6d
$3f7f2f9d
$3f7f0e58
$3f7eea9d
xr:$00000410= $3f7ec46d
$3f7e9bc9
$3f7e70b0
$3f7e4323
xr:$00000414= $3f7e1324
$3f7de0b1
$3f7dabcc
$3f7d7474
xr:$00000418= $3f7d3aac
$3f7cfe73
$3f7cbfc9
$3f7c7eb0
xr:$0000041c= $3f7c3b28
$3f7bf531
$3f7baccd
$3f7b61fc
xr:$00000420= $3f7b14be
$3f7ac516
$3f7a7302
$3f7a1e84
xr:$00000424= $3f79c79d
$3f796e4e
$3f791298
$3f78b47b
xr:$00000428= $3f7853f8
$3f77f110
$3f778bc5
$3f772417
xr:$0000042c= $3f76ba07
$3f764d97
$3f75dec6
$3f756d97
xr:$00000430= $3f74fa0b
$3f748422
$3f740bdd
$3f73913f
xr:$00000434= $3f731447
$3f7294f8
$3f721352
$3f718f57
xr:$00000438= $3f710908
$3f708066
$3f6ff573
$3f6f6830
xr:$0000043c= $3f6ed89e
$3f6e46be
$3f6db293
$3f6d1c1d
xr:$00000440= $3f6c835e
$3f6be858
$3f6b4b0c
$3f6aab7b
xr:$00000444= $3f6a09a7
$3f696591
$3f68bf3c
$3f6816a8
xr:$00000448= $3f676bd8
$3f66becc
$3f660f88
$3f655e0b
xr:$0000044c= $3f64aa59
$3f63f473
$3f633c5a
$3f628210
xr:$00000450= $3f61c598
$3f6106f2
$3f604621
$3f5f8327
xr:$00000454= $3f5ebe05
$3f5df6be
$3f5d2d53
$3f5c61c7
xr:$00000458= $3f5b941a
$3f5ac450
$3f59f26a
$3f591e6a
xr:$0000045c= $3f584853
$3f577026
$3f5695e5
$3f55b993
xr:$00000460= $3f54db31
$3f53fac3
$3f531849
$3f5233c6
xr:$00000464= $3f514d3d
$3f5064af
$3f4f7a1f
$3f4e8d90
xr:$00000468= $3f4d9f02
$3f4cae79
$3f4bbbf8
$3f4ac77f
xr:$0000046c= $3f49d112
$3f48d8b3
$3f47de65
$3f46e22a
xr:$00000470= $3f45e403
$3f44e3f5
$3f43e200
$3f42de29
xr:$00000474= $3f41d870
$3f40d0da
$3f3fc767
$3f3ebc1b
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-1
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-1 X Memory ROM Contents (full cycle of cosine values) (Continued)
B-2
xr:$00000478= $3f3daef9
$3f3ca003
$3f3b8f3b
$3f3a7ca4
xr:$0000047c= $3f396842
$3f385216
$3f373a23
$3f36206c
xr:$00000480= $3f3504f3
$3f33e7bc
$3f32c8c9
$3f31a81d
xr:$00000484= $3f3085bb
$3f2f61a5
$3f2e3bde
$3f2d1469
xr:$00000488= $3f2beb4a
$3f2ac082
$3f299415
$3f286605
xr:$0000048c= $3f273656
$3f26050a
$3f24d225
$3f239da9
xr:$00000490= $3f226799
$3f212ff9
$3f1ff6cb
$3f1ebc12
xr:$00000494= $3f1d7fd1
$3f1c420c
$3f1b02c6
$3f19c200
xr:$00000498= $3f187fc0
$3f173c07
$3f15f6d9
$3f14b039
xr:$0000049c= $3f13682a
$3f121eb0
$3f10d3cd
$3f0f8784
xr:$000004a0= $3f0e39da
$3f0cead0
$3f0b9a6b
$3f0a48ad
xr:$000004a4= $3f08f59b
$3f07a136
$3f064b82
$3f04f484
xr:$000004a8= $3f039c3d
$3f0242b1
$3f00e7e4
$3eff17b2
xr:$000004ac= $3efc5d27
$3ef9a02d
$3ef6e0cb
$3ef41f07
xr:$000004b0= $3ef15aea
$3eee9479
$3eebcbbb
$3ee900b7
xr:$000004b4= $3ee63375
$3ee363fa
$3ee0924f
$3eddbe79
xr:$000004b8= $3edae880
$3ed8106b
$3ed53641
$3ed25a09
xr:$000004bc= $3ecf7bca
$3ecc9b8b
$3ec9b953
$3ec6d529
xr:$000004c0= $3ec3ef15
$3ec1071e
$3ebe1d4a
$3ebb31a0
xr:$000004c4= $3eb8442a
$3eb554ec
$3eb263ef
$3eaf713a
xr:$000004c8= $3eac7cd4
$3ea986c4
$3ea68f12
$3ea395c5
xr:$000004cc=
$3ea09ae5
$3e9d9e78
$3e9aa086
$3e97a117
xr:$000004d0= $3e94a031
$3e919ddd
$3e8e9a22
$3e8b9507
xr:$000004d4= $3e888e93
$3e8586ce
$3e827dc0
$3e7ee6e1
xr:$000004d8= $3e78cfcc
$3e72b651
$3e6c9a7f
$3e667c66
xr:$000004dc= $3e605c13
$3e5a3997
$3e541501
$3e4dee60
xr:$000004e0= $3e47c5c2
$3e419b37
$3e3b6ecf
$3e354098
xr:$000004e4= $3e2f10a2
$3e28defc
$3e22abb6
$3e1c76de
xr:$000004e8= $3e164083
$3e1008b7
$3e09cf86
$3e039502
xr:$000004ec=
$3dfab273
$3dee3876
$3de1bc2e
$3dd53db9
xr:$000004f0=
$3dc8bd36
$3dbc3ac3
$3dafb680
$3da3308c
xr:$000004f4=
$3d96a905
$3d8a200a
$3d7b2b74
$3d621469
xr:$000004f8=
$3d48fb30
$3d2fe007
$3d16c32c
$3cfb49ba
xr:$000004fc=
$3cc90ab0
$3c96c9b6
$3c490e90
$3bc90f88
xr:$00000500= $248d4000
$bbc90f88
$bc490e90
$bc96c9b6
xr:$00000504= $bcc90ab0
$bcfb49ba
$bd16c32c
$bd2fe007
xr:$00000508= $bd48fb30
$bd621469
$bd7b2b74
$bd8a200a
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-1 X Memory ROM Contents (full cycle of cosine values) (Continued)
xr:$0000050c= $bd96a905
$bda3308c
$bdafb680
$bdbc3ac3
xr:$00000510= $bdc8bd36
$bdd53db9
$bde1bc2e
$bdee3876
xr:$00000514= $bdfab273
$be039502
$be09cf86
$be1008b7
xr:$00000518= $be164083
$be1c76de
$be22abb6
$be28defc
xr:$0000051c= $be2f10a2
$be354098
$be3b6ecf
$be419b37
xr:$00000520= $be47c5c2
$be4dee60
$be541501
$be5a3997
xr:$00000524= $be605c13
$be667c66
$be6c9a7f
$be72b651
xr:$00000528= $be78cfcc
$be7ee6e1
$be827dc0
$be8586ce
xr:$0000052c= $be888e93
$be8b9507
$be8e9a22
$be919ddd
xr:$00000530= $be94a031
$be97a117
$be9aa086
$be9d9e78
xr:$00000534= $bea09ae5
$bea395c5
$bea68f12
$bea986c4
xr:$00000538= $beac7cd4
$beaf713a
$beb263ef
$beb554ec
xr:$0000053c= $beb8442a
$bebb31a0
$bebe1d4a
$bec1071e
xr:$00000540= $bec3ef15
$bec6d529
$bec9b953
$becc9b8b
xr:$00000544= $becf7bca
$bed25a09
$bed53641
$bed8106b
xr:$00000548= $bedae880
$beddbe79
$bee0924f
$bee363fa
xr:$0000054c= $bee63375
$bee900b7
$beebcbbb
$beee9479
xr:$00000550= $bef15aea
$bef41f07
$bef6e0cb
$bef9a02d
xr:$00000554= $befc5d27
$beff17b2
$bf00e7e4
$bf0242b1
xr:$00000558= $bf039c3d
$bf04f484
$bf064b82
$bf07a136
xr:$0000055c= $bf08f59b
$bf0a48ad
$bf0b9a6b
$bf0cead0
xr:$00000560= $bf0e39da
$bf0f8784
$bf10d3cd
$bf121eb0
xr:$00000564= $bf13682a
$bf14b039
$bf15f6d9
$bf173c07
xr:$00000568= $bf187fc0
$bf19c200
$bf1b02c6
$bf1c420c
xr:$0000056c= $bf1d7fd1
$bf1ebc12
$bf1ff6cb
$bf212ff9
xr:$00000570= $bf226799
$bf239da9
$bf24d225
$bf26050a
xr:$00000574= $bf273656
$bf286605
$bf299415
$bf2ac082
xr:$00000578= $bf2beb4a
$bf2d1469
$bf2e3bde
$bf2f61a5
xr:$0000057c= $bf3085bb
$bf31a81d
$bf32c8c9
$bf33e7bc
xr:$00000580= $bf3504f3
$bf36206c
$bf373a23
$bf385216
xr:$00000584= $bf396842
$bf3a7ca4
$bf3b8f3b
$bf3ca003
xr:$00000588= $bf3daef9
$bf3ebc1b
$bf3fc767
$bf40d0da
xr:$0000058c= $bf41d870
$bf42de29
$bf43e200
$bf44e3f5
xr:$00000590= $bf45e403
$bf46e22a
$bf47de65
$bf48d8b3
xr:$00000594= $bf49d112
$bf4ac77f
$bf4bbbf8
$bf4cae79
xr:$00000598= $bf4d9f02
$bf4e8d90
$bf4f7a1f
$bf5064af
xr:$0000059c= $bf514d3d
$bf5233c6
$bf531849
$bf53fac3
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-3
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-1 X Memory ROM Contents (full cycle of cosine values) (Continued)
B-4
xr:$000005a0= $bf54db31
$bf55b993
$bf5695e5
$bf577026
xr:$000005a4= $bf584853
$bf591e6a
$bf59f26a
$bf5ac450
xr:$000005a8= $bf5b941a
$bf5c61c7
$bf5d2d53
$bf5df6be
xr:$000005ac= $bf5ebe05
$bf5f8327
$bf604621
$bf6106f2
xr:$000005b0= $bf61c598
$bf628210
$bf633c5a
$bf63f473
xr:$000005b4= $bf64aa59
$bf655e0b
$bf660f88
$bf66becc
xr:$000005b8= $bf676bd8
$bf6816a8
$bf68bf3c
$bf696591
xr:$000005bc= $bf6a09a7
$bf6aab7b
$bf6b4b0c
$bf6be858
xr:$000005c0= $bf6c835e
$bf6d1c1d
$bf6db293
$bf6e46be
xr:$000005c4= $bf6ed89e
$bf6f6830
$bf6ff573
$bf708066
xr:$000005c8= $bf710908
$bf718f57
$bf721352
$bf7294f8
xr:$000005cc=
$bf731447
$bf73913f
$bf740bdd
$bf748422
xr:$000005d0= $bf74fa0b
$bf756d97
$bf75dec6
$bf764d97
xr:$000005d4= $bf76ba07
$bf772417
$bf778bc5
$bf77f110
xr:$000005d8= $bf7853f8
$bf78b47b
$bf791298
$bf796e4e
xr:$000005dc= $bf79c79d
$bf7a1e84
$bf7a7302
$bf7ac516
xr:$000005e0= $bf7b14be
$bf7b61fc
$bf7baccd
$bf7bf531
xr:$000005e4= $bf7c3b28
$bf7c7eb0
$bf7cbfc9
$bf7cfe73
xr:$000005e8= $bf7d3aac
$bf7d7474
$bf7dabcc
$bf7de0b1
xr:$000005ec=
$bf7e1324
$bf7e4323
$bf7e70b0
$bf7e9bc9
xr:$000005f0=
$bf7ec46d
$bf7eea9d
$bf7f0e58
$bf7f2f9d
xr:$000005f4=
$bf7f4e6d
$bf7f6ac7
$bf7f84ab
$bf7f9c18
xr:$000005f8=
$bf7fb10f
$bf7fc38f
$bf7fd397
$bf7fe129
xr:$000005fc=
$bf7fec43
$bf7ff4e6
$bf7ffb11
$bf7ffec4
xr:$00000600= $bf800000
$bf7ffec4
$bf7ffb11
$bf7ff4e6
xr:$00000604= $bf7fec43
$bf7fe129
$bf7fd397
$bf7fc38f
xr:$00000608= $bf7fb10f
$bf7f9c18
$bf7f84ab
$bf7f6ac7
xr:$0000060c= $bf7f4e6d
$bf7f2f9d
$bf7f0e58
$bf7eea9d
xr:$00000610= $bf7ec46d
$bf7e9bc9
$bf7e70b0
$bf7e4323
xr:$00000614= $bf7e1324
$bf7de0b1
$bf7dabcc
$bf7d7474
xr:$00000618= $bf7d3aac
$bf7cfe73
$bf7cbfc9
$bf7c7eb0
xr:$0000061c= $bf7c3b28
$bf7bf531
$bf7baccd
$bf7b61fc
xr:$00000620= $bf7b14be
$bf7ac516
$bf7a7302
$bf7a1e84
xr:$00000624= $bf79c79d
$bf796e4e
$bf791298
$bf78b47b
xr:$00000628= $bf7853f8
$bf77f110
$bf778bc5
$bf772417
xr:$0000062c= $bf76ba07
$bf764d97
$bf75dec6
$bf756d97
xr:$00000630= $bf74fa0b
$bf748422
$bf740bdd
$bf73913f
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-1 X Memory ROM Contents (full cycle of cosine values) (Continued)
xr:$00000634= $bf731447
$bf7294f8
$bf721352
$bf718f57
xr:$00000638= $bf710908
$bf708066
$bf6ff573
$bf6f6830
xr:$0000063c= $bf6ed89e
$bf6e46be
$bf6db293
$bf6d1c1d
xr:$00000640= $bf6c835e
$bf6be858
$bf6b4b0c
$bf6aab7b
xr:$00000644= $bf6a09a7
$bf696591
$bf68bf3c
$bf6816a8
xr:$00000648= $bf676bd8
$bf66becc
$bf660f88
$bf655e0b
xr:$0000064c= $bf64aa59
$bf63f473
$bf633c5a
$bf628210
xr:$00000650= $bf61c598
$bf6106f2
$bf604621
$bf5f8327
xr:$00000654= $bf5ebe05
$bf5df6be
$bf5d2d53
$bf5c61c7
xr:$00000658= $bf5b941a
$bf5ac450
$bf59f26a
$bf591e6a
xr:$0000065c= $bf584853
$bf577026
$bf5695e5
$bf55b993
xr:$00000660= $bf54db31
$bf53fac3
$bf531849
$bf5233c6
xr:$00000664= $bf514d3d
$bf5064af
$bf4f7a1f
$bf4e8d90
xr:$00000668= $bf4d9f02
$bf4cae79
$bf4bbbf8
$bf4ac77f
xr:$0000066c= $bf49d112
$bf48d8b3
$bf47de65
$bf46e22a
xr:$00000670= $bf45e403
$bf44e3f5
$bf43e200
$bf42de29
xr:$00000674= $bf41d870
$bf40d0da
$bf3fc767
$bf3ebc1b
xr:$00000678= $bf3daef9
$bf3ca003
$bf3b8f3b
$bf3a7ca4
xr:$0000067c= $bf396842
$bf385216
$bf373a23
$bf36206c
xr:$00000680= $bf3504f3
$bf33e7bc
$bf32c8c9
$bf31a81d
xr:$00000684= $bf3085bb
$bf2f61a5
$bf2e3bde
$bf2d1469
xr:$00000688= $bf2beb4a
$bf2ac082
$bf299415
$bf286605
xr:$0000068c= $bf273656
$bf26050a
$bf24d225
$bf239da9
xr:$00000690= $bf226799
$bf212ff9
$bf1ff6cb
$bf1ebc12
xr:$00000694= $bf1d7fd1
$bf1c420c
$bf1b02c6
$bf19c200
xr:$00000698= $bf187fc0
$bf173c07
$bf15f6d9
$bf14b039
xr:$0000069c= $bf13682a
$bf121eb0
$bf10d3cd
$bf0f8784
xr:$000006a0= $bf0e39da
$bf0cead0
$bf0b9a6b
$bf0a48ad
xr:$000006a4= $bf08f59b
$bf07a136
$bf064b82
$bf04f484
xr:$000006a8= $bf039c3d
$bf0242b1
$bf00e7e4
$beff17b2
xr:$000006ac= $befc5d27
$bef9a02d
$bef6e0cb
$bef41f07
xr:$000006b0= $bef15aea
$beee9479
$beebcbbb
$bee900b7
xr:$000006b4= $bee63375
$bee363fa
$bee0924f
$beddbe79
xr:$000006b8= $bedae880
$bed8106b
$bed53641
$bed25a09
xr:$000006bc= $becf7bca
$becc9b8b
$bec9b953
$bec6d529
xr:$000006c0= $bec3ef15
$bec1071e
$bebe1d4a
$bebb31a0
xr:$000006c4= $beb8442a
$beb554ec
$beb263ef
$beaf713a
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-5
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-1 X Memory ROM Contents (full cycle of cosine values) (Continued)
B-6
xr:$000006c8= $beac7cd4
$bea986c4
$bea68f12
$bea395c5
xr:$000006cc=
$bea09ae5
$be9d9e78
$be9aa086
$be97a117
xr:$000006d0= $be94a031
$be919ddd
$be8e9a22
$be8b9507
xr:$000006d4= $be888e93
$be8586ce
$be827dc0
$be7ee6e1
xr:$000006d8= $be78cfcc
$be72b651
$be6c9a7f
$be667c66
xr:$000006dc= $be605c13
$be5a3997
$be541501
$be4dee60
xr:$000006e0= $be47c5c2
$be419b37
$be3b6ecf
$be354098
xr:$000006e4= $be2f10a2
$be28defc
$be22abb6
$be1c76de
xr:$000006e8= $be164083
$be1008b7
$be09cf86
$be039502
xr:$000006ec=
$bdfab273
$bdee3876
$bde1bc2e
$bdd53db9
xr:$000006f0=
$bdc8bd36
$bdbc3ac3
$bdafb680
$bda3308c
xr:$000006f4=
$bd96a905
$bd8a200a
$bd7b2b74
$bd621469
xr:$000006f8=
$bd48fb30
$bd2fe007
$bd16c32c
$bcfb49ba
xr:$000006fc=
$bcc90ab0
$bc96c9b6
$bc490e90
$bbc90f88
xr:$00000700= $a48d4000
$3bc90f88
$3c490e90
$3c96c9b6
xr:$00000704= $3cc90ab0
$3cfb49ba
$3d16c32c
$3d2fe007
xr:$00000708= $3d48fb30
$3d621469
$3d7b2b74
$3d8a200a
xr:$0000070c= $3d96a905
$3da3308c
$3dafb680
$3dbc3ac3
xr:$00000710= $3dc8bd36
$3dd53db9
$3de1bc2e
$3dee3876
xr:$00000714= $3dfab273
$3e039502
$3e09cf86
$3e1008b7
xr:$00000718= $3e164083
$3e1c76de
$3e22abb6
$3e28defc
xr:$0000071c= $3e2f10a2
$3e354098
$3e3b6ecf
$3e419b37
xr:$00000720= $3e47c5c2
$3e4dee60
$3e541501
$3e5a3997
xr:$00000724= $3e605c13
$3e667c66
$3e6c9a7f
$3e72b651
xr:$00000728= $3e78cfcc
$3e7ee6e1
$3e827dc0
$3e8586ce
xr:$0000072c= $3e888e93
$3e8b9507
$3e8e9a22
$3e919ddd
xr:$00000730= $3e94a031
$3e97a117
$3e9aa086
$3e9d9e78
xr:$00000734= $3ea09ae5
$3ea395c5
$3ea68f12
$3ea986c4
xr:$00000738= $3eac7cd4
$3eaf713a
$3eb263ef
$3eb554ec
xr:$0000073c= $3eb8442a
$3ebb31a0
$3ebe1d4a
$3ec1071e
xr:$00000740= $3ec3ef15
$3ec6d529
$3ec9b953
$3ecc9b8b
xr:$00000744= $3ecf7bca
$3ed25a09
$3ed53641
$3ed8106b
xr:$00000748= $3edae880
$3eddbe79
$3ee0924f
$3ee363fa
xr:$0000074c= $3ee63375
$3ee900b7
$3eebcbbb
$3eee9479
xr:$00000750= $3ef15aea
$3ef41f07
$3ef6e0cb
$3ef9a02d
xr:$00000754= $3efc5d27
$3eff17b2
$3f00e7e4
$3f0242b1
xr:$00000758= $3f039c3d
$3f04f484
$3f064b82
$3f07a136
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-1 X Memory ROM Contents (full cycle of cosine values) (Continued)
xr:$0000075c= $3f08f59b
$3f0a48ad
$3f0b9a6b
$3f0cead0
xr:$00000760= $3f0e39da
$3f0f8784
$3f10d3cd
$3f121eb0
xr:$00000764= $3f13682a
$3f14b039
$3f15f6d9
$3f173c07
xr:$00000768= $3f187fc0
$3f19c200
$3f1b02c6
$3f1c420c
xr:$0000076c= $3f1d7fd1
$3f1ebc12
$3f1ff6cb
$3f212ff9
xr:$00000770= $3f226799
$3f239da9
$3f24d225
$3f26050a
xr:$00000774= $3f273656
$3f286605
$3f299415
$3f2ac082
xr:$00000778= $3f2beb4a
$3f2d1469
$3f2e3bde
$3f2f61a5
xr:$0000077c= $3f3085bb
$3f31a81d
$3f32c8c9
$3f33e7bc
xr:$00000780= $3f3504f3
$3f36206c
$3f373a23
$3f385216
xr:$00000784= $3f396842
$3f3a7ca4
$3f3b8f3b
$3f3ca003
xr:$00000788= $3f3daef9
$3f3ebc1b
$3f3fc767
$3f40d0da
xr:$0000078c= $3f41d870
$3f42de29
$3f43e200
$3f44e3f5
xr:$00000790= $3f45e403
$3f46e22a
$3f47de65
$3f48d8b3
xr:$00000794= $3f49d112
$3f4ac77f
$3f4bbbf8
$3f4cae79
xr:$00000798= $3f4d9f02
$3f4e8d90
$3f4f7a1f
$3f5064af
xr:$0000079c= $3f514d3d
$3f5233c6
$3f531849
$3f53fac3
xr:$000007a0= $3f54db31
$3f55b993
$3f5695e5
$3f577026
xr:$000007a4= $3f584853
$3f591e6a
$3f59f26a
$3f5ac450
xr:$000007a8= $3f5b941a
$3f5c61c7
$3f5d2d53
$3f5df6be
xr:$000007ac= $3f5ebe05
$3f5f8327
$3f604621
$3f6106f2
xr:$000007b0= $3f61c598
$3f628210
$3f633c5a
$3f63f473
xr:$000007b4= $3f64aa59
$3f655e0b
$3f660f88
$3f66becc
xr:$000007b8= $3f676bd8
$3f6816a8
$3f68bf3c
$3f696591
xr:$000007bc= $3f6a09a7
$3f6aab7b
$3f6b4b0c
$3f6be858
xr:$000007c0= $3f6c835e
$3f6d1c1d
$3f6db293
$3f6e46be
xr:$000007c4= $3f6ed89e
$3f6f6830
$3f6ff573
$3f708066
xr:$000007c8= $3f710908
$3f718f57
$3f721352
$3f7294f8
xr:$000007cc=
$3f731447
$3f73913f
$3f740bdd
$3f748422
xr:$000007d0= $3f74fa0b
$3f756d97
$3f75dec6
$3f764d97
xr:$000007d4= $3f76ba07
$3f772417
$3f778bc5
$3f77f110
xr:$000007d8= $3f7853f8
$3f78b47b
$3f791298
$3f796e4e
xr:$000007dc= $3f79c79d
$3f7a1e84
$3f7a7302
$3f7ac516
xr:$000007e0= $3f7b14be
$3f7b61fc
$3f7baccd
$3f7bf531
xr:$000007e4= $3f7c3b28
$3f7c7eb0
$3f7cbfc9
$3f7cfe73
xr:$000007e8= $3f7d3aac
$3f7d7474
$3f7dabcc
$3f7de0b1
xr:$000007ec=
$3f7e4323
$3f7e70b0
$3f7e9bc9
MOTOROLA
$3f7e1324
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-7
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Table B-1 X Memory ROM Contents (full cycle of cosine values) (Continued)
xr:$000007f0=
$3f7ec46d
$3f7eea9d
$3f7f0e58
$3f7f2f9d
xr:$000007f4=
$3f7f4e6d
$3f7f6ac7
$3f7f84ab
$3f7f9c18
xr:$000007f8=
$3f7fb10f
$3f7fc38f
$3f7fd397
$3f7fe129
xr:$000007fc=
$3f7fec43
$3f7ff4e6
$3f7ffb11
$3f7ffec4
Freescale Semiconductor, Inc...
Table B-2 Y Memory ROM Contents (full cycle of sine values)
B-8
yr:$00000400= $00000000
$3bc90f88
$3c490e90
$3c96c9b6
yr:$00000404= $3cc90ab0
$3cfb49ba
$3d16c32c
$3d2fe007
yr:$00000408= $3d48fb30
$3d621469
$3d7b2b74
$3d8a200a
yr:$0000040c= $3d96a905
$3da3308c
$3dafb680
$3dbc3ac3
yr:$00000410= $3dc8bd36
$3dd53db9
$3de1bc2e
$3dee3876
yr:$00000414= $3dfab273
$3e039502
$3e09cf86
$3e1008b7
yr:$00000418= $3e164083
$3e1c76de
$3e22abb6
$3e28defc
yr:$0000041c= $3e2f10a2
$3e354098
$3e3b6ecf
$3e419b37
yr:$00000420= $3e47c5c2
$3e4dee60
$3e541501
$3e5a3997
yr:$00000424= $3e605c13
$3e667c66
$3e6c9a7f
$3e72b651
yr:$00000428= $3e78cfcc
$3e7ee6e1
$3e827dc0
$3e8586ce
yr:$0000042c= $3e888e93
$3e8b9507
$3e8e9a22
$3e919ddd
yr:$00000430= $3e94a031
$3e97a117
$3e9aa086
$3e9d9e78
yr:$00000434= $3ea09ae5
$3ea395c5
$3ea68f12
$3ea986c4
yr:$00000438= $3eac7cd4
$3eaf713a
$3eb263ef
$3eb554ec
yr:$0000043c= $3eb8442a
$3ebb31a0
$3ebe1d4a
$3ec1071e
yr:$00000440= $3ec3ef15
$3ec6d529
$3ec9b953
$3ecc9b8b
yr:$00000444= $3ecf7bca
$3ed25a09
$3ed53641
$3ed8106b
yr:$00000448= $3edae880
$3eddbe79
$3ee0924f
$3ee363fa
yr:$0000044c= $3ee63375
$3ee900b7
$3eebcbbb
$3eee9479
yr:$00000450= $3ef15aea
$3ef41f07
$3ef6e0cb
$3ef9a02d
yr:$00000454= $3efc5d27
$3eff17b2
$3f00e7e4
$3f0242b1
yr:$00000458= $3f039c3d
$3f04f484
$3f064b82
$3f07a136
yr:$0000045c= $3f08f59b
$3f0a48ad
$3f0b9a6b
$3f0cead0
yr:$00000460= $3f0e39da
$3f0f8784
$3f10d3cd
$3f121eb0
yr:$00000464= $3f13682a
$3f14b039
$3f15f6d9
$3f173c07
yr:$00000468= $3f187fc0
$3f19c200
$3f1b02c6
$3f1c420c
yr:$0000046c= $3f1d7fd1
$3f1ebc12
$3f1ff6cb
$3f212ff9
yr:$00000470= $3f226799
$3f239da9
$3f24d225
$3f26050a
yr:$00000474= $3f273656
$3f286605
$3f299415
$3f2ac082
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-2 Y Memory ROM Contents (full cycle of sine values) (Continued)
yr:$00000478= $3f2beb4a
$3f2d1469
$3f2e3bde
$3f2f61a5
yr:$0000047c= $3f3085bb
$3f31a81d
$3f32c8c9
$3f33e7bc
yr:$00000480= $3f3504f3
$3f36206c
$3f373a23
$3f385216
yr:$00000484= $3f396842
$3f3a7ca4
$3f3b8f3b
$3f3ca003
yr:$00000488= $3f3daef9
$3f3ebc1b
$3f3fc767
$3f40d0da
yr:$0000048c= $3f41d870
$3f42de29
$3f43e200
$3f44e3f5
yr:$00000490= $3f45e403
$3f46e22a
$3f47de65
$3f48d8b3
yr:$00000494= $3f49d112
$3f4ac77f
$3f4bbbf8
$3f4cae79
yr:$00000498= $3f4d9f02
$3f4e8d90
$3f4f7a1f
$3f5064af
yr:$0000049c= $3f514d3d
$3f5233c6
$3f531849
$3f53fac3
yr:$000004a0= $3f54db31
$3f55b993
$3f5695e5
$3f577026
yr:$000004a4= $3f584853
$3f591e6a
$3f59f26a
$3f5ac450
yr:$000004a8= $3f5b941a
$3f5c61c7
$3f5d2d53
$3f5df6be
yr:$000004ac= $3f5ebe05
$3f5f8327
$3f604621
$3f6106f2
yr:$000004b0= $3f61c598
$3f628210
$3f633c5a
$3f63f473
yr:$000004b4= $3f64aa59
$3f655e0b
$3f660f88
$3f66becc
yr:$000004b8= $3f676bd8
$3f6816a8
$3f68bf3c
$3f696591
yr:$000004bc= $3f6a09a7
$3f6aab7b
$3f6b4b0c
$3f6be858
yr:$000004c0= $3f6c835e
$3f6d1c1d
$3f6db293
$3f6e46be
yr:$000004c4= $3f6ed89e
$3f6f6830
$3f6ff573
$3f708066
yr:$000004c8= $3f710908
$3f718f57
$3f721352
$3f7294f8
yr:$000004cc=
$3f731447
$3f73913f
$3f740bdd
$3f748422
yr:$000004d0= $3f74fa0b
$3f756d97
$3f75dec6
$3f764d97
yr:$000004d4= $3f76ba07
$3f772417
$3f778bc5
$3f77f110
yr:$000004d8= $3f7853f8
$3f78b47b
$3f791298
$3f796e4e
yr:$000004dc= $3f79c79d
$3f7a1e84
$3f7a7302
$3f7ac516
yr:$000004e0= $3f7b14be
$3f7b61fc
$3f7baccd
$3f7bf531
yr:$000004e4= $3f7c3b28
$3f7c7eb0
$3f7cbfc9
$3f7cfe73
yr:$000004e8= $3f7d3aac
$3f7d7474
$3f7dabcc
$3f7de0b1
yr:$000004ec= $3f7e1324
$3f7e4323
$3f7e70b0
$3f7e9bc9
yr:$000004f0=
$3f7ec46d
$3f7eea9d
$3f7f0e58
$3f7f2f9d
yr:$000004f4=
$3f7f4e6d
$3f7f6ac7
$3f7f84ab
$3f7f9c18
yr:$000004f8=
$3f7fb10f
$3f7fc38f
$3f7fd397
$3f7fe129
yr:$000004fc=
$3f7fec43
$3f7ff4e6
$3f7ffb11
$3f7ffec4
yr:$00000500= $3f800000
$3f7ffec4
$3f7ffb11
$3f7ff4e6
yr:$00000504= $3f7fec43
$3f7fe129
$3f7fd397
$3f7fc38f
yr:$00000508= $3f7fb10f
$3f7f9c18
$3f7f84ab
$3f7f6ac7
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-9
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-2 Y Memory ROM Contents (full cycle of sine values) (Continued)
B-10
yr:$0000050c= $3f7f4e6d
$3f7f2f9d
$3f7f0e58
$3f7eea9d
yr:$00000510= $3f7ec46d
$3f7e9bc9
$3f7e70b0
$3f7e4323
yr:$00000514= $3f7e1324
$3f7de0b1
$3f7dabcc
$3f7d7474
yr:$00000518= $3f7d3aac
$3f7cfe73
$3f7cbfc9
$3f7c7eb0
yr:$0000051c= $3f7c3b28
$3f7bf531
$3f7baccd
$3f7b61fc
yr:$00000520= $3f7b14be
$3f7ac516
$3f7a7302
$3f7a1e84
yr:$00000524= $3f79c79d
$3f796e4e
$3f791298
$3f78b47b
yr:$00000528= $3f7853f8
$3f77f110
$3f778bc5
$3f772417
yr:$0000052c= $3f76ba07
$3f764d97
$3f75dec6
$3f756d97
yr:$00000530= $3f74fa0b
$3f748422
$3f740bdd
$3f73913f
yr:$00000534= $3f731447
$3f7294f8
$3f721352
$3f718f57
yr:$00000538= $3f710908
$3f708066
$3f6ff573
$3f6f6830
yr:$0000053c= $3f6ed89e
$3f6e46be
$3f6db293
$3f6d1c1d
yr:$00000540= $3f6c835e
$3f6be858
$3f6b4b0c
$3f6aab7b
yr:$00000544= $3f6a09a7
$3f696591
$3f68bf3c
$3f6816a8
yr:$00000548= $3f676bd8
$3f66becc
$3f660f88
$3f655e0b
yr:$0000054c= $3f64aa59
$3f63f473
$3f633c5a
$3f628210
yr:$00000550= $3f61c598
$3f6106f2
$3f604621
$3f5f8327
yr:$00000554= $3f5ebe05
$3f5df6be
$3f5d2d53
$3f5c61c7
yr:$00000558= $3f5b941a
$3f5ac450
$3f59f26a
$3f591e6a
yr:$0000055c= $3f584853
$3f577026
$3f5695e5
$3f55b993
yr:$00000560= $3f54db31
$3f53fac3
$3f531849
$3f5233c6
yr:$00000564= $3f514d3d
$3f5064af
$3f4f7a1f
$3f4e8d90
yr:$00000568= $3f4d9f02
$3f4cae79
$3f4bbbf8
$3f4ac77f
yr:$0000056c= $3f49d112
$3f48d8b3
$3f47de65
$3f46e22a
yr:$00000570= $3f45e403
$3f44e3f5
$3f43e200
$3f42de29
yr:$00000574= $3f41d870
$3f40d0da
$3f3fc767
$3f3ebc1b
yr:$00000578= $3f3daef9
$3f3ca003
$3f3b8f3b
$3f3a7ca4
yr:$0000057c= $3f396842
$3f385216
$3f373a23
$3f36206c
yr:$00000580= $3f3504f3
$3f33e7bc
$3f32c8c9
$3f31a81d
yr:$00000584= $3f3085bb
$3f2f61a5
$3f2e3bde
$3f2d1469
yr:$00000588= $3f2beb4a
$3f2ac082
$3f299415
$3f286605
yr:$0000058c= $3f273656
$3f26050a
$3f24d225
$3f239da9
yr:$00000590= $3f226799
$3f212ff9
$3f1ff6cb
$3f1ebc12
yr:$00000594= $3f1d7fd1
$3f1c420c
$3f1b02c6
$3f19c200
yr:$00000598= $3f187fc0
$3f173c07
$3f15f6d9
$3f14b039
yr:$0000059c= $3f13682a
$3f121eb0
$3f10d3cd
$3f0f8784
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-2 Y Memory ROM Contents (full cycle of sine values) (Continued)
yr:$000005a0= $3f0e39da
$3f0cead0
$3f0b9a6b
$3f0a48ad
yr:$000005a4= $3f08f59b
$3f07a136
$3f064b82
$3f04f484
yr:$000005a8= $3f039c3d
$3f0242b1
$3f00e7e4
$3eff17b2
yr:$000005ac= $3efc5d27
$3ef9a02d
$3ef6e0cb
$3ef41f07
yr:$000005b0= $3ef15aea
$3eee9479
$3eebcbbb
$3ee900b7
yr:$000005b4= $3ee63375
$3ee363fa
$3ee0924f
$3eddbe79
yr:$000005b8= $3edae880
$3ed8106b
$3ed53641
$3ed25a09
yr:$000005bc= $3ecf7bca
$3ecc9b8b
$3ec9b953
$3ec6d529
yr:$000005c0= $3ec3ef15
$3ec1071e
$3ebe1d4a
$3ebb31a0
yr:$000005c4= $3eb8442a
$3eb554ec
$3eb263ef
$3eaf713a
yr:$000005c8= $3eac7cd4
$3ea986c4
$3ea68f12
$3ea395c5
yr:$000005cc=
$3ea09ae5
$3e9d9e78
$3e9aa086
$3e97a117
yr:$000005d0= $3e94a031
$3e919ddd
$3e8e9a22
$3e8b9507
yr:$000005d4= $3e888e93
$3e8586ce
$3e827dc0
$3e7ee6e1
yr:$000005d8= $3e78cfcc
$3e72b651
$3e6c9a7f
$3e667c66
yr:$000005dc= $3e605c13
$3e5a3997
$3e541501
$3e4dee60
yr:$000005e0= $3e47c5c2
$3e419b37
$3e3b6ecf
$3e354098
yr:$000005e4= $3e2f10a2
$3e28defc
$3e22abb6
$3e1c76de
yr:$000005e8= $3e164083
$3e1008b7
$3e09cf86
$3e039502
yr:$000005ec= $3dfab273
$3dee3876
$3de1bc2e
$3dd53db9
yr:$000005f0=
$3dc8bd36
$3dbc3ac3
$3dafb680
$3da3308c
yr:$000005f4=
$3d96a905
$3d8a200a
$3d7b2b74
$3d621469
yr:$000005f8=
$3d48fb30
$3d2fe007
$3d16c32c
$3cfb49ba
yr:$000005fc=
$3cc90ab0
$3c96c9b6
$3c490e90
$3bc90f88
yr:$00000600= $80000000
$bbc90f88
$bc490e90
$bc96c9b6
yr:$00000604= $bcc90ab0
$bcfb49ba
$bd16c32c
$bd2fe007
yr:$00000608= $bd48fb30
$bd621469
$bd7b2b74
$bd8a200a
yr:$0000060c= $bd96a905
$bda3308c
$bdafb680
$bdbc3ac3
yr:$00000610= $bdc8bd36
$bdd53db9
$bde1bc2e
$bdee3876
yr:$00000614= $bdfab273
$be039502
$be09cf86
$be1008b7
yr:$00000618= $be164083
$be1c76de
$be22abb6
$be28defc
yr:$0000061c= $be2f10a2
$be354098
$be3b6ecf
$be419b37
yr:$00000620= $be47c5c2
$be4dee60
$be541501
$be5a3997
yr:$00000624= $be605c13
$be667c66
$be6c9a7f
$be72b651
yr:$00000628= $be78cfcc
$be7ee6e1
$be827dc0
$be8586ce
yr:$0000062c= $be888e93
$be8b9507
$be8e9a22
$be919ddd
yr:$00000630= $be94a031
$be97a117
$be9aa086
$be9d9e78
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-11
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-2 Y Memory ROM Contents (full cycle of sine values) (Continued)
B-12
yr:$00000634= $bea09ae5
$bea395c5
$bea68f12
$bea986c4
yr:$00000638= $beac7cd4
$beaf713a
$beb263ef
$beb554ec
yr:$0000063c= $beb8442a
$bebb31a0
$bebe1d4a
$bec1071e
yr:$00000640= $bec3ef15
$bec6d529
$bec9b953
$becc9b8b
yr:$00000644= $becf7bca
$bed25a09
$bed53641
$bed8106b
yr:$00000648= $bedae880
$beddbe79
$bee0924f
$bee363fa
yr:$0000064c= $bee63375
$bee900b7
$beebcbbb
$beee9479
yr:$00000650= $bef15aea
$bef41f07
$bef6e0cb
$bef9a02d
yr:$00000654= $befc5d27
$beff17b2
$bf00e7e4
$bf0242b1
yr:$00000658= $bf039c3d
$bf04f484
$bf064b82
$bf07a136
yr:$0000065c= $bf08f59b
$bf0a48ad
$bf0b9a6b
$bf0cead0
yr:$00000660= $bf0e39da
$bf0f8784
$bf10d3cd
$bf121eb0
yr:$00000664= $bf13682a
$bf14b039
$bf15f6d9
$bf173c07
yr:$00000668= $bf187fc0
$bf19c200
$bf1b02c6
$bf1c420c
yr:$0000066c= $bf1d7fd1
$bf1ebc12
$bf1ff6cb
$bf212ff9
yr:$00000670= $bf226799
$bf239da9
$bf24d225
$bf26050a
yr:$00000674= $bf273656
$bf286605
$bf299415
$bf2ac082
yr:$00000678= $bf2beb4a
$bf2d1469
$bf2e3bde
$bf2f61a5
yr:$0000067c= $bf3085bb
$bf31a81d
$bf32c8c9
$bf33e7bc
yr:$00000680= $bf3504f3
$bf36206c
$bf373a23
$bf385216
yr:$00000684= $bf396842
$bf3a7ca4
$bf3b8f3b
$bf3ca003
yr:$00000688= $bf3daef9
$bf3ebc1b
$bf3fc767
$bf40d0da
yr:$0000068c= $bf41d870
$bf42de29
$bf43e200
$bf44e3f5
yr:$00000690= $bf45e403
$bf46e22a
$bf47de65
$bf48d8b3
yr:$00000694= $bf49d112
$bf4ac77f
$bf4bbbf8
$bf4cae79
yr:$00000698= $bf4d9f02
$bf4e8d90
$bf4f7a1f
$bf5064af
yr:$0000069c= $bf514d3d
$bf5233c6
$bf531849
$bf53fac3
yr:$000006a0= $bf54db31
$bf55b993
$bf5695e5
$bf577026
yr:$000006a4= $bf584853
$bf591e6a
$bf59f26a
$bf5ac450
yr:$000006a8= $bf5b941a
$bf5c61c7
$bf5d2d53
$bf5df6be
yr:$000006ac= $bf5ebe05
$bf5f8327
$bf604621
$bf6106f2
yr:$000006b0= $bf61c598
$bf628210
$bf633c5a
$bf63f473
yr:$000006b4= $bf64aa59
$bf655e0b
$bf660f88
$bf66becc
yr:$000006b8= $bf676bd8
$bf6816a8
$bf68bf3c
$bf696591
yr:$000006bc= $bf6a09a7
$bf6aab7b
$bf6b4b0c
$bf6be858
yr:$000006c0= $bf6c835e
$bf6d1c1d
$bf6db293
$bf6e46be
yr:$000006c4= $bf6ed89e
$bf6f6830
$bf6ff573
$bf708066
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-2 Y Memory ROM Contents (full cycle of sine values) (Continued)
yr:$000006c8= $bf710908
$bf718f57
$bf721352
$bf7294f8
yr:$000006cc=
$bf731447
$bf73913f
$bf740bdd
$bf748422
yr:$000006d0= $bf74fa0b
$bf756d97
$bf75dec6
$bf764d97
yr:$000006d4= $bf76ba07
$bf772417
$bf778bc5
$bf77f110
yr:$000006d8= $bf7853f8
$bf78b47b
$bf791298
$bf796e4e
yr:$000006dc= $bf79c79d
$bf7a1e84
$bf7a7302
$bf7ac516
yr:$000006e0= $bf7b14be
$bf7b61fc
$bf7baccd
$bf7bf531
yr:$000006e4= $bf7c3b28
$bf7c7eb0
$bf7cbfc9
$bf7cfe73
yr:$000006e8= $bf7d3aac
$bf7d7474
$bf7dabcc
$bf7de0b1
yr:$000006ec= $bf7e1324
$bf7e4323
$bf7e70b0
$bf7e9bc9
yr:$000006f0=
$bf7ec46d
$bf7eea9d
$bf7f0e58
$bf7f2f9d
yr:$000006f4=
$bf7f4e6d
$bf7f6ac7
$bf7f84ab
$bf7f9c18
yr:$000006f8=
$bf7fb10f
$bf7fc38f
$bf7fd397
$bf7fe129
yr:$000006fc=
$bf7fec43
$bf7ff4e6
$bf7ffb11
$bf7ffec4
yr:$00000700= $bf800000
$bf7ffec4
$bf7ffb11
$bf7ff4e6
yr:$00000704= $bf7fec43
$bf7fe129
$bf7fd397
$bf7fc38f
yr:$00000708= $bf7fb10f
$bf7f9c18
$bf7f84ab
$bf7f6ac7
yr:$0000070c= $bf7f4e6d
$bf7f2f9d
$bf7f0e58
$bf7eea9d
yr:$00000710= $bf7ec46d
$bf7e9bc9
$bf7e70b0
$bf7e4323
yr:$00000714= $bf7e1324
$bf7de0b1
$bf7dabcc
$bf7d7474
yr:$00000718= $bf7d3aac
$bf7cfe73
$bf7cbfc9
$bf7c7eb0
yr:$0000071c= $bf7c3b28
$bf7bf531
$bf7baccd
$bf7b61fc
yr:$00000720= $bf7b14be
$bf7ac516
$bf7a7302
$bf7a1e84
yr:$00000724= $bf79c79d
$bf796e4e
$bf791298
$bf78b47b
yr:$00000728= $bf7853f8
$bf77f110
$bf778bc5
$bf772417
yr:$0000072c= $bf76ba07
$bf764d97
$bf75dec6
$bf756d97
yr:$00000730= $bf74fa0b
$bf748422
$bf740bdd
$bf73913f
yr:$00000734= $bf731447
$bf7294f8
$bf721352
$bf718f57
yr:$00000738= $bf710908
$bf708066
$bf6ff573
$bf6f6830
yr:$0000073c= $bf6ed89e
$bf6e46be
$bf6db293
$bf6d1c1d
yr:$00000740= $bf6c835e
$bf6be858
$bf6b4b0c
$bf6aab7b
yr:$00000744= $bf6a09a7
$bf696591
$bf68bf3c
$bf6816a8
yr:$00000748= $bf676bd8
$bf66becc
$bf660f88
$bf655e0b
yr:$0000074c= $bf64aa59
$bf63f473
$bf633c5a
$bf628210
yr:$00000750= $bf61c598
$bf6106f2
$bf604621
$bf5f8327
yr:$00000754= $bf5ebe05
$bf5df6be
$bf5d2d53
$bf5c61c7
yr:$00000758= $bf5b941a
$bf5ac450
$bf59f26a
$bf591e6a
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-13
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Freescale Semiconductor, Inc...
Table B-2 Y Memory ROM Contents (full cycle of sine values) (Continued)
B-14
yr:$0000075c= $bf584853
$bf577026
$bf5695e5
$bf55b993
yr:$00000760= $bf54db31
$bf53fac3
$bf531849
$bf5233c6
yr:$00000764= $bf514d3d
$bf5064af
$bf4f7a1f
$bf4e8d90
yr:$00000768= $bf4d9f02
$bf4cae79
$bf4bbbf8
$bf4ac77f
yr:$0000076c= $bf49d112
$bf48d8b3
$bf47de65
$bf46e22a
yr:$00000770= $bf45e403
$bf44e3f5
$bf43e200
$bf42de29
yr:$00000774= $bf41d870
$bf40d0da
$bf3fc767
$bf3ebc1b
yr:$00000778= $bf3daef9
$bf3ca003
$bf3b8f3b
$bf3a7ca4
yr:$0000077c= $bf396842
$bf385216
$bf373a23
$bf36206c
yr:$00000780= $bf3504f3
$bf33e7bc
$bf32c8c9
$bf31a81d
yr:$00000784= $bf3085bb
$bf2f61a5
$bf2e3bde
$bf2d1469
yr:$00000788= $bf2beb4a
$bf2ac082
$bf299415
$bf286605
yr:$0000078c= $bf273656
$bf26050a
$bf24d225
$bf239da9
yr:$00000790= $bf226799
$bf212ff9
$bf1ff6cb
$bf1ebc12
yr:$00000794= $bf1d7fd1
$bf1c420c
$bf1b02c6
$bf19c200
yr:$00000798= $bf187fc0
$bf173c07
$bf15f6d9
$bf14b039
yr:$0000079c= $bf13682a
$bf121eb0
$bf10d3cd
$bf0f8784
yr:$000007a0= $bf0e39da
$bf0cead0
$bf0b9a6b
$bf0a48ad
yr:$000007a4= $bf08f59b
$bf07a136
$bf064b82
$bf04f484
yr:$000007a8= $bf039c3d
$bf0242b1
$bf00e7e4
$beff17b2
yr:$000007ac= $befc5d27
$bef9a02d
$bef6e0cb
$bef41f07
yr:$000007b0= $bef15aea
$beee9479
$beebcbbb
$bee900b7
yr:$000007b4= $bee63375
$bee363fa
$bee0924f
$beddbe79
yr:$000007b8= $bedae880
$bed8106b
$bed53641
$bed25a09
yr:$000007bc= $becf7bca
$becc9b8b
$bec9b953
$bec6d529
yr:$000007c0= $bec3ef15
$bec1071e
$bebe1d4a
$bebb31a0
yr:$000007c4= $beb8442a
$beb554ec
$beb263ef
$beaf713a
yr:$000007c8= $beac7cd4
$bea986c4
$bea68f12
$bea395c5
yr:$000007cc=
$bea09ae5
$be9d9e78
$be9aa086
$be97a117
yr:$000007d0= $be94a031
$be919ddd
$be8e9a22
$be8b9507
yr:$000007d4= $be888e93
$be8586ce
$be827dc0
$be7ee6e1
yr:$000007d8= $be78cfcc
$be72b651
$be6c9a7f
$be667c66
yr:$000007dc= $be605c13
$be5a3997
$be541501
$be4dee60
yr:$000007e0= $be47c5c2
$be419b37
$be3b6ecf
$be354098
yr:$000007e4= $be2f10a2
$be28defc
$be22abb6
$be1c76de
yr:$000007e8= $be164083
$be1008b7
$be09cf86
$be039502
yr:$000007ec= $bdfab273
$bdee3876
$bde1bc2e
$bdd53db9
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc.
X and Y Memory ROM Tables
Table B-2 Y Memory ROM Contents (full cycle of sine values) (Continued)
$bdc8bd36
$bdbc3ac3
$bdafb680
$bda3308c
yr:$000007f4=
$bd96a905
$bd8a200a
$bd7b2b74
$bd621469
yr:$000007f8=
$bd48fb30
$bd2fe007
$bd16c32c
$bcfb49ba
yr:$000007fc=
$bcc90ab0
$bc96c9b6
$bc490e90
$bbc90f88
Freescale Semiconductor, Inc...
yr:$000007f0=
MOTOROLA
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
B-15
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc...
X and Y Memory ROM Tables
B-16
DSP96002/D, Rev. 2
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA
Freescale Semiconductor, Inc...
Freescale Semiconductor, Inc.
OnCE and Mfax are trademarks of Motorola, Inc.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does
Motorola assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or incidental damages. “typical”
parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. Motorola does not convey any license
under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support
life, or for any other application in which the failure of the Motorola product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of
the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/
Affirmative Action Employer.
How to reach us:
USA/Europe/Locations Not
Listed:
Motorola Literature Distribution
P.O. Box 20912
Phoenix, Arizona 85036
1 (800) 441-2447 or
1 (602) 303-5454
Mfax:
[email protected]
TOUCHTONE (602) 244-6609
Asia/Pacific:
Motorola Semiconductors H.K. Ltd.
8B Tai Ping Industrial Park
51 Ting Kok Road
Tai Po, N.T., Hong Kong
852-2662928
Japan:
Nippon Motorola Ltd.
Tatsumi-SPD-JLDC
6F Seibu-Butsuryu-Center
3-14-2 Tatsumi Koto-Ku
Tokyo 135, Japan
03-3521-8315
Technical Resource Center:
1 (800) 521-6274
DSP Helpline
[email protected]
Internet:
http://www.motorola-dsp.com
For More Information On This Product,
Go to: www.freescale.com