BAS16VV; BAS16VY Triple high-speed switching diodes Rev. 02 — 10 September 2004 Product data sheet 1. Product profile 1.1 General description Three electrically isolated high-speed switching diodes, encapsulated in very small SMD plastic packages. Table 1: Product overview Type number Package Configuration Philips EIAJ BAS16VV SOT666 - triple isolated diode BAS16VY SOT363 SC-88 triple isolated diode 1.2 Features ■ ■ ■ ■ Very small SMD plastic packages High-speed switching Three electrically isolated diodes Low capacitance. 1.3 Applications ■ General purpose switching in surface mounted circuits. 1.4 Quick reference data Table 2: Quick reference data Symbol Parameter Conditions Min Typ Max Unit VR reverse voltage - - 100 V IFRM repetitive peak forward current - - 450 mA trr reverse recovery time - - 4 ns BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes 2. Pinning information Table 3: Discrete pinning Pin Description Simplified outline 1 anode (diode 1) 2 anode (diode 2) 3 anode (diode 3) 4 cathode (diode 3) 5 cathode (diode 2) 6 cathode (diode 1) 6 5 4 1 2 3 Symbol 6 5 1 2 4 3 sym043 001aab555 3. Ordering information Table 4: Ordering information Type number Package Name Description Version BAS16VV - plastic surface mounted package; 6 leads SOT666 BAS16VY SC-88 plastic surface mounted package; 6 leads SOT363 4. Marking Table 5: Marking Type number Marking code [1] BAS16VV 53 BAS16VY 16* [1] * = p: Made in Hong Kong * = t: Made in Malaysia * = W: Made in China 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit Per diode VRRM repetitive peak reverse voltage - 100 V VR reverse voltage - 100 V IF forward current - 200 mA IFRM repetitive peak forward current - 450 mA 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 2 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes Table 6: Limiting values …continued In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol IFSM Parameter non-repetitive peak forward current Conditions Min [1] square wave Max Unit - tp = 1 µs - 4.5 A tp = 1 ms - 1 A tp = 1 s - 0.5 A [2] [3] - 180 mW [4] total power dissipation Ptot SOT666 Tamb ≤ 25 °C SOT363 Tsp = 85 °C - 250 mW Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C Tstg storage temperature −65 +150 °C [1] Tj = 25 °C prior to surge; see Figure 2. [2] Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated and standard footprint. [3] Single diode loaded. [4] Solder points at pins 2, 3, 5 and 6. 6. Thermal characteristics Table 7: Thermal characteristics Symbol Parameter Conditions Rth(j-a) thermal resistance from junction to ambient in free air SOT666 Rth(j-s) Typ Max Unit [1] [2] - - 700 K/W [2] [3] - - 410 K/W [4] - - 260 K/W thermal resistance from junction to soldering point SOT363 [1] Refer to SOT666 standard mounting conditions. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated, 1 cm2 collector mounting pad. [4] Solder points at pins 2, 3, 5 and 6. 9397 750 13856 Product data sheet Min © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 3 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes 7. Characteristics Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit forward voltage see Figure 1 IF = 1 mA - - 715 mV IF = 10 mA - - 855 mV IF = 50 mA - - 1 V IF = 150 mA - - 1.25 V VR = 25 V - - 30 nA VR = 75 V - - 1 µA VR = 25 V; Tj = 150 °C - - 30 µA VR = 75 V; Tj = 150 °C - - 50 µA - - 1.5 pF Per diode VF IR reverse current see Figure 3 Cd diode capacitance VR = 0 V; f = 1 MHz; see Figure 4 trr reverse recovery see Figure 5 time [1] - - 4 ns Vfr forward recovery see Figure 6 voltage [2] - - 1.75 V [1] When switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA. [2] When switched from IF = 10 mA; tr = 20 ns. 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 4 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes mbg382 300 IF (mA) (1) (2) mgw103 10 I FSM (A) (3) 200 1 100 0 0 1 VF (V) 2 10−1 1 102 10 103 104 t p (µs) (1) Tj = 150 °C; typical values. Based on square wave currents. (2) Tj = 25 °C; typical values. Tj = 25 °C prior to surge. (3) Tj = 25 °C; maximum values. Fig 1. Forward current as a function of forward voltage. Fig 2. Maximum permissible non-repetitive peak forward current as a function of pulse duration. mga884 105 mbg446 0.8 Cd (pF) IR (nA) VR = 75 V 104 0.6 max 103 75 V 0.4 25 V 102 0.2 typ typ 10 0 100 0 Tj (°C) 200 0 4 8 12 VR (V) 16 f = 1 MHz; Tj = 25 °C. Fig 3. Reverse current as a function of junction temperature. Fig 4. Diode capacitance as a function of reverse voltage; typical values. 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 5 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes 8. Test information tr tp t D.U.T. 10 % + IF IF RS = 50 Ω SAMPLING OSCILLOSCOPE V = VR + IF × RS trr t Ri = 50 Ω (1) 90 % VR mga881 input signal output signal Input signal: Reverse pulse rise time tr = 0.6 ns; reverse voltage pulse duration tp = 100 ns; duty factor δ ≤ 0.05. Oscilloscope: Rise time tr = 0.35 ns. (1) IR = 1 mA. Fig 5. Reverse recovery voltage test circuit and waveforms. I 1 kΩ RS = 50 Ω D.U.T. 450 Ω I V 90 % OSCILLOSCOPE Vfr Ri = 50 Ω 10 % t mga882 tr t tp input signal output signal Input signal: Forward pulse rise time tr = 20 ns; forward current pulse duration tp ≥ 100 ns; duty factor δ ≤ 0.005. Fig 6. Forward recovery voltage test circuit and waveforms. 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 6 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes 9. Package outline Plastic surface mounted package; 6 leads SOT666 D E A X Y S S HE 6 5 4 pin 1 index A 1 2 e1 c 3 bp w M A Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A bp c D E e e1 HE Lp w y mm 0.6 0.5 0.27 0.17 0.18 0.08 1.7 1.5 1.3 1.1 1.0 0.5 1.7 1.5 0.3 0.1 0.1 0.1 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 01-01-04 01-08-27 SOT666 Fig 7. Package outline SOT666. 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 7 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes Plastic surface mounted package; 6 leads SOT363 D E B y X A HE 6 5 v M A 4 Q pin 1 index A A1 1 2 e1 3 bp c Lp w M B e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E e e1 HE Lp Q v w y mm 1.1 0.8 0.1 0.30 0.20 0.25 0.10 2.2 1.8 1.35 1.15 1.3 0.65 2.2 2.0 0.45 0.15 0.25 0.15 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC SOT363 JEDEC EIAJ SC-88 EUROPEAN PROJECTION ISSUE DATE 97-02-28 Fig 8. Package outline SOT363 (SC-88). 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 8 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes 10. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package Description Packing quantity 3000 4000 10000 BAS16VV SOT666 4 mm pitch, 8 mm tape and reel - -115 - BAS16VY SOT363 4 mm pitch, 8 mm tape and reel; T1 -115 - -135 4 mm pitch, 8 mm tape and reel; T2 -125 [1] -165 For further information and the availability of packing methods, see Section 15. 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 9 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes 11. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes BAS16VV_BAS16VY_2 20040910 Product data sheet - 9397 750 13856 BAS16VY_1 Modifications: BAS16VY_1 • The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. • • • • Type number BAS16VV added. Table 2 “Quick reference data”: table added. Table 6 “Limiting values”: maximum value of VRRM changed from 85 V to 100 V. Table 6 “Limiting values”: maximum value of VR changed from 75 V to 100 V. 20030408 Product specification - 9397 750 13856 Product data sheet 9397 750 10909 - © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 10 of 12 BAS16VV; BAS16VY Philips Semiconductors Triple high-speed switching diodes 12. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 13. Definitions 14. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 15. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13856 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 10 September 2004 11 of 12 Philips Semiconductors BAS16VV; BAS16VY Triple high-speed switching diodes 16. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packing information. . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 10 September 2004 Document order number: 9397 750 13856 Published in The Netherlands