PS07 series General purpose rectifiers Rev. 02 — 26 July 2004 Product data sheet 1. Product profile 1.1 General description General purpose rectifier diodes in a cavity free cylindrical glass surface mounted package using Implotec™ technology. 1.2 Features ■ Low leakage current ■ Hermetically sealed package ■ Glass passivated ■ Small package. 1.3 Applications ■ Low frequency general purpose rectification ■ Bridge rectifiers. 1.4 Quick reference data ■ VR ≤ 600 V (PS07J) ■ VR ≤ 400 V (PS07G) ■ VR ≤ 200 V (PS07D) ■ VF ≤ 1.1 V ■ IF(AV) ≤ 1.8 A ■ trr = 3 µs (typ). 2. Pinning information Table 1: Discrete pinning Pin Description a anode (a) k cathode (k) Simplified outline Symbol k a 001aaa020 k a SOD87 PS07 series Philips Semiconductors General purpose rectifiers 3. Ordering information Table 2: Ordering information Type number PS07D Package Name Description Version SOD87 Hermetically sealed glass surface mounted package; Implotec™ technology; 2 connectors SOD87 PS07G PS07J 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VRRM VRWM VR IF(AV) Conditions Min Max Unit PS07D - 200 V PS07G - 400 V PS07J - 600 V PS07D - 200 V PS07G - 400 V PS07J - 600 V PS07D - 200 V PS07G - 400 V PS07J - 600 V Ttp = 75 °C; Figure 1 averaged over any 20 ms period - 1.8 A Tamb = 65 °C; Figure 2 mounted on a printed-circuit board; averaged over any 20 ms period - 0.6 A tp = 8.3 ms half sine wave; Tj = 25 °C prior to surge - 25 A repetitive peak reverse voltage crest working reverse voltage reverse voltage average forward current IFSM non-repetitive peak forward current Tstg storage temperature −65 +150 °C Tj junction temperature −65 +150 °C 9397 750 13203 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 26 July 2004 2 of 9 PS07 series Philips Semiconductors General purpose rectifiers 003aaa634 3 003aaa635 1 IF(AV) IF(AV) (A) (A) 0.8 2 0.6 0.4 1 0.2 0 0 0 40 80 120 Ttp (°C) 160 a = 1.42; VR = VRRM(max); δ = 0.5 0 40 160 120 Tamb (°C) 80 a = 1.42; VR = VRRM(max); δ = 0.5 Device mounted as shown in Figure 6 Fig 1. Average forward current as a function of tie-point temperature (including losses due to reverse leakage); maximum values. Fig 2. Average forward current as a function of ambient temperature (including losses due to reverse leakage); maximum values. 5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Rth(j-tp) thermal resistance from junction to tie-point Rth(j-a) thermal resistance from junction to ambient Conditions Min - 30 - K/W mounted on a printed-circuit board, 1.5 mm thick; copper thickness ≥ 40 µm; Figure 6 - 150 - K/W 9397 750 13203 Product data sheet Typ Max Unit © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 26 July 2004 3 of 9 PS07 series Philips Semiconductors General purpose rectifiers 6. Characteristics Table 5: Characteristics Tj = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Tj = 25 °C - - 1.1 V Tj = 150 °C - - 0.95 V Static characteristics forward voltage VF IF = 1 A; Figure 3 reverse current IR VR = VRRM; Figure 4 Tj = 25 °C - - 10 µA Tj = 125 °C - - 50 µA Dynamic characteristics Cd diode capacitance f = 1 MHz; VR = 4 V; Figure 5 - 8.5 - pF trr reverse recovery time switching from IF = 0.5 A to IR = 1 A; measured at IR = 0.25 A; Figure 7 - 3 - µs 003aaa636 10 Tj = 25 °C IF 003aaa620 103 IR (A) (µA) 150 °C 8 102 6 4 10 2 0 1 0 1 2 VF (V) 3 Tj = 25 °C 0 80 120 Tj (°C) 160 Tj = 25 °C Fig 3. Forward current as a function of forward voltage; maximum values. Fig 4. Reverse current as a function of junction temperature; maximum values. 9397 750 13203 Product data sheet 40 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 26 July 2004 4 of 9 PS07 series Philips Semiconductors General purpose rectifiers mgc740 102 50 Cd (pF) 4.5 10 50 2.5 1 1 102 10 VR (V) 103 1.25 Dimensions in mm msb213 f = 1 MHz; Tj = 25 °C Fig 5. Diode capacitance as a function of reverse voltage; typical values. IF (A) DUT + 10 Ω Fig 6. Printed-circuit board for surface mounting. 0.5 25 V trr 1Ω 50 Ω 0 t 0.25 0.5 IR (A) 1.0 mam057 Tj = 25 °C Fig 7. Test circuit and reverse recovery time waveform definition. 9397 750 13203 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 26 July 2004 5 of 9 PS07 series Philips Semiconductors General purpose rectifiers 7. Package outline Hermetically sealed glass surface mounted package; ImplotecTM(1) technology; 2 connectors k SOD87 a (2) D1 L L H DIMENSIONS (mm are the original dimensions) UNIT mm D 2.1 2.0 D1 2.0 1.8 H 3.7 3.3 D L 0 1 2 mm scale 0.3 Notes 1. Implotec is a trademark of Koninklijke Philips Electronics N.V. 2. The marking indicates the cathode. REFERENCES OUTLINE VERSION IEC SOD87 100H03 JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-06-04 04-06-28 Fig 8. SOD87 package outline. 9397 750 13203 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 26 July 2004 6 of 9 PS07 series Philips Semiconductors General purpose rectifiers 8. Revision history Table 6: Revision history Document ID Release date PS07_SERIES_2 20040726 Product data sheet Modifications: PS07_SERIES_1 Data sheet Change status notice - Supersedes 9397 750 13203 PS07_SERIES_1 • IF(AV) data and conditions revised in Section 1.4 “Quick reference data” and Table 3 “Limiting values” • • • Figure 1 2 and 3 updated Tstg and Tj data revised in Table 3 “Limiting values” VF data and conditions revised in Table 5 “Characteristics” 20040203 Product data sheet - 9397 750 13203 Product data sheet Document number 9397 750 12711 - © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 26 July 2004 7 of 9 PS07 series Philips Semiconductors General purpose rectifiers 9. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. Definitions customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 12. Trademarks Implotec — is a trademark of Koninklijke Philips Electronics N.V. 11. Disclaimers Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13203 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 02 — 26 July 2004 8 of 9 PS07 series Philips Semiconductors General purpose rectifiers 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 2 2 3 4 6 7 8 8 8 8 8 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 26 July 2004 Document order number: 9397 750 13203 Published in The Netherlands