Features Regulated Converters ● ● ● ● ● ● ● ● ● ● ● ● ● 4:1 Wide Input Voltage Range 3 Watts Regulated Output Power 1.6kVDC Isolation Over Current Protection Continuous Low Profile, 10.2 mm Height No other Components required Five-Sided EMI Shield International Safety Standard Approvals Standard DIP24 and SMD-Pinning 2 Year Warranty No Derating to 71°C UL 1950 Component Recognized Efficiency to 78% Input (4) Efficiency(5) Current mA % RP03S_DD Series Capacitive(6) Load max. µF Input Range VDC Output Voltage VDC Output Current mA RP03-2405SD** 9-36 5 500 RP03-2412SD** 9-36 12 250 169 78 170 RP03-2415SD** 9-36 15 200 169 78 110 RP03-4805SD** 18-75 5 500 74 75 1000 RP03-4812SD** 18-75 12 250 85 78 170 RP03-4815SD** 18-75 15 200 86 77 110 RP03-2405DD** 9-36 ±5 ±250 149 74 ±550 DIP24 (SMD) DC/DC-Converter 3 Watt DIP24 & SMD, Single & Dual Output Selection Guide 12V, 24V and 48V Input Types Part Number POWERLINE 147 75 1000 RP03-2412DD** 9-36 ±12 ±125 172 77 ±96 RP03-2415DD** 9-36 ±15 ±100 172 77 ±47 RP03-4805DD** 18-75 ±5 ±250 75 74 ±550 RP03-4812DD** 18-75 ±12 ±125 86 77 ±96 RP03-4815DD** 18-75 ±15 ±100 85 78 ±47 ** add Suffix SMD for SMD package Description The D-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards (10). 178 April-2005 www.recom-international.com POWERLINE RP03-S_DD Series DC/DC-Converter Derating-Graph (Ambient Temperature) RP03-4805SD/M1 RP03-4805SD 125 125 100 100 75 Natural Convection 50 Output Power (%) Output Power (%) 75 25 0 -25 Natural Convection 50 25 0 -40 -25 -10 0 50 60 70 80 90 100 85 Ambient Temperature Range (°C) -10 0 50 60 70 80 90 100 75 Ambient Temperature Range (°C) Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 24V nominal input 48V nominal input Input Filter Input Surge Voltage (100 ms max.) Pi Type 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load) Remote OFF input current 350ms typ. DC-DC ON DC-DC OFF Nominal input Output Power Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA 3W max. Output Voltage Accuracy (full Load and nominal Vin) ±2% Minimum Load (see Note 1) 10% of FL Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) 50VDC 100VDC 20mAp-p Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 8) 9-36VDC 18-75VDC ±0.2% Single Dual Cross Regulation (asymmetrical load 25%/100% FL) ±0.2% ±1% ±5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient ±0.02%/°C, max. Transient Response (25% load step change) 200µS Over Load Protection (% of full load at nominal Vin) 180% typ Short Circuit Protection Continuous, automatic recovery continued on next page www.recom-international.com April-2005 179 RP03-S_DD Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Efficiency Isolation Voltage see „Selection Guide“ table In to out I/O to case I/O to case 1.600VDC min. DIP type 1.600VDC min. SMD type 1.000VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 300pF max. Operating Frequency 300kHz typ. Approved to Safety Standards Operating Temperature Range UL 1950, EN60950 Standard M1 (see note 3) -25°C to +85°C (with derating) -40°C to +85°C (non-derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection 20°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel-Coated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Weight DIP SMD 16g 18g Dimensions DIP SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 2.941 x 106 Hours MTBF (see note 2) Notes : 1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. Start up voltage : 10VDC 8. The ON/OFF control pin voltage is referenced to negative inpit. 9. See application notes for EMI-filtering. 10. The M1 version (RP03-xxxxSD-M1 / RP03-xxxxDD-M1) do not carry the UL certification. 180 April-2005 www.recom-international.com POWERLINE RP03-S_DD Series DC/DC-Converter Package Style and Pinning (mm) DIP24 Package Style 3rd angle projection 31.80 20.30 10.20 3.8 2 2.54 10.16 15.20 Pin Connections 22.90 Pin # Single Dual 1 +Vin +Vin 2 +Vin +Vin 10 NC Common 11 NC Common 12 -Vout NC 13 +Vout -Vout 15 NC +Vout 20 Ctrl Ctrl 23 -Vin -Vin 24 -Vin -Vin NC = No Connection Ctrl = Remote On/Off Control 0.25 x 0.50 Rectangular Pin 10 11 12 1 2 Bottom View 20 24 23 15 13 Pin Pitch Tolerance ±0.35 mm SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 25.40 Pin area 0.1 x 0.50 2.54 0.50 Pin Connections 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 www.recom-international.com Top View 1 27.94 April-2005 Pin # Single Dual 1 +Vin +Vin 2 +Vin +Vin 10 NC Common 11 NC Common 12 -Vout NC 13 +Vout -Vout 15 NC +Vout 20 Ctrl Ctrl 23 -Vin -Vin 24 -Vin -Vin Others NC NC NC = No Connection Ctrl = Remote On/Off Control Pin Pitch Tolerance ±0.35 mm 181