Features Regulated Converters ● ● ● ● ● ● ● ● ● ● ● ● 2:1 Wide Input Voltage Range 3 Watts Regulated Output Power 1.6kVDC Isolation Suffix “H “3kVDC Isolation Low Profile, 10.2 mm Height Over Current Protection Five-Sided Shield No Derating to 71°C Non-Conductive Black Plastic International Safety Standard Approvals Standard DIP24 and SMD-Pinning High Efficiency to 80% Selection Guide 5V, 12V, 24V and 48V Input Types Part Number Output Voltage VDC Output Current mA Input (4) Current mA Efficiency(5) % Capacitive(6) Load max. µF DIP24 (SMD) Input Range VDC RP03-053.3SG** 4.5-6 3.3 600 649 66 2200 RP03-0505SG** 4.5-6 5 600 909 70 1000 RP03-0512SG** 4.5-6 12 250 835 76 170 RP03-0515SG** 4.5-6 15 200 845 75 110 RP03-123.3SG** 9-18 3.3 600 266 70 2200 RP03-1205SG** 9-18 5 600 353 75 1000 RP03-1212SG** 9-18 12 250 333 79 170 RP03-1215SG** 9-18 15 200 343 77 100 RP03-243.3SG** 18-36 3.3 600 123 71 2200 RP03-2405SG** 18-36 5 600 174 76 1000 RP03-2412SG** 18-36 12 250 164 80 170 RP03-2415SG** 18-36 15 200 164 80 100 RP03-483.3SG** 36-75 3.3 600 61 72 2200 RP03-4805SG** 36-75 5 600 88 75 1000 RP03-4812SG** 36-75 12 250 84 79 170 RP03-4815SG** 36-75 15 200 84 79 100 RP03-0505DG** 4.5-6 ±5 ±300 870 73 ±500 RP03-0512DG** 4.5-6 ±12 ±125 845 75 ±96 RP03-0515DG** 4.5-6 ±15 ±100 870 73 ±47 RP03-1205DG** 9-18 ±5 ±300 348 76 ±500 RP03-1212DG** 9-18 ±12 ±125 338 78 ±96 RP03-1215DG** 9-18 ±15 ±100 333 79 ±47 RP03-2405DG** 18-36 ±5 ±300 172 77 ±500 RP03-2412DG** 18-36 ±12 ±125 167 79 ±96 RP03-2415DG** 18-36 ±15 ±100 167 79 ±47 RP03-4805DG** 36-75 ±5 ±300 86 77 ±500 RP03-4812DG** 36-75 ±12 ±125 84 79 ±96 RP03-4815DG** 36-75 ±15 ±100 84 79 ±47 POWERLINE DC/DC-Converter RP03S_DG Series 3 Watt DIP24 & SMD, Single & Dual Output ** add Suffix SMD for SMD package 186 April-2005 www.recom-international.com RP03-S_DG Series POWERLINE DC/DC-Converter Derating-Graph (Ambient Temperature) RP03-4805SG 125 100 Output Power (%) 75 50 Natural Convection 25 0 -25 -10 0 50 60 70 80 90 100 Ambient Temperature Range (°C) 71 Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 5V nominal input 12V nominal input 24V nominal input 48V nominal input Input Filter Input Surge Voltage (100 ms max.) 4.5-6VDC 9-18VDC 18-36VDC 36-75VDC Pi Type 5V Input 12V Input 24V Input 48V Input 15VDC 36VDC 50VDC 100VDC Input Reflected Ripple (nominal Vin and full load) 120mAp-p Start Up Time (nominal Vin and constant resistor load) 30ms typ. Output Power 3W max. Output Voltage Accuracy (full Load and nominal Vin) ±2% Minimum Load (see Note 1) 10% of FL Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) ±0.2% Single Dual Cross Regulation (asymmetrical load 25%/100% FL) Ripple and Noise (20MHz bandwith) ±0.2% ±2% ±5% 3.3V, 5V others Temperature Coefficient 75mVp-p 1%/p-p of Vout max. ±0.02%/°C, max. Transient Response (25% load step change) 500µS continued on next page www.recom-international.com April-2005 187 RP03-S_DG Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Over Load Protection (% of full load at nominal Vin) 180% typ Short Circuit Protection Continuous, automatic recovery Efficiency Isolation Voltage see „Selection Guide“ table In to out Standard Suffix /H 1.600VDC min. 3.000VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 300pF max. Operating Frequency 100kHz min. Operating Temperature Range -25°C to +71°C Storage Temperature Range -55°C to +105°C Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Non-conductive black plastic Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Weight DIP SMD 14g 15g Dimensions DIP SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3.690 x 106 Hours MTBF (see note 2) Notes : 1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). H” for 3.000VDC Isolation 3. Suffix “H 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. See application notes for EMI-filtering. 188 April-2005 www.recom-international.com POWERLINE RP03-S_DG Series DC/DC-Converter Package Style and Pinning (mm) DIP24 Package Style 3rd angle projection 31.80 20.30 10.20 3.8 4.60 5.10 17.80 15.20 Pin Connections Pin # 2 3 9 10 11 14 15 16 22 23 NC = No Connection 0.25 x 0.50 Rectangular Pin 9 10 11 2 3 Bottom View 16 15 14 23 22 Single –Vin –Vin NC NC NC +Vout NC –Vout +Vin +Vin Dual –Vin –Vin Com NC –Vout +Vout NC Com +Vin +Vin Pin Pitch Tolerance ±0.35 mm SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 25.40 Pin Connections Pin # Pin area 0.1 x 0.50 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 www.recom-international.com Top View 1 27.94 April-2005 2 3 9 10 11 14 15 16 22 23 Others NC = No Connection Single –Vin –Vin NC NC NC +Vout NC –Vout +Vin +Vin NC Dual –Vin –Vin Com NC –Vout +Vout NC Com +Vin +Vin NC Pin Pitch Tolerance ±0.35 mm 189