KA2161 PAL/NTSC 1 CHIP FOR C/TV PAL/NTSC 1 CHIP IC FOR COLOR TELEVISION 54-SDIP-600 The KA2161 combines an IF system and a video/chroma/deflection on a monolithic integrated circuit to provide a PAL/NTSC color television. This device is suitable to a muiti-CTV svstem on a 54 SDIP and includes VI F/SIF, videc/chroma/deflection processor. FUNCTION IF BLOCK • VIF Amp. • Video detector • 1st, 2nd IF AGC filter • Noise canceller • AFT • RFAGC • SIF limiter Amp. • Attenuator • FM detector • AF AMP VIDEO • Contrast control • Brightness control • Pedestal clamp circuit • Sharpness control using internal D.L • OSD(R,G,B) interface • OSD brightness control CHROMA • • • • • • • • • ACC amplifier demodulator Color control Tint control for NTSC system APC circuit VCO (fsc) Killer detector Matrix circuit PAL/NTSC system SW ORDERING INFORMATION Device Package DEFLECTION • Sync. seperator • AFC filter • 32th VCO • Horizontal driver • X-ray protecter • 50/60 Hz auto detector • Vertical driver OSD • OSD(R,G,B) interface circuit • OSD brightness control FEATURE • • • • • • • Operating Temperature KA2161 54-SDIP-600 Lower operation voltage: VCC=9V Available Multi system (PAL/NTSC/SECAM) with SECAM decoder Minimum number of external parts required Small package type: 54 SDlP Suitable OSD interface Available 50/60 Hz auto switch Built in Delay Line for video sharpness -20°C ~+70°C KA2161 PAL/NTSC 1 CHIP FOR C/TV BLOCK DIAGRAM SIF DET.IN 4 6 AGC FILTER2 7 8 VIF INPUT 9 VIF INPUT 10 APC FILTER OSD BRIGHT 53 SOUND OUT 52 RF AGC DELAY 51 RF AGC OUT 49 SIF IN 48 AFT OUT 90 VIF/SIF GND 54 50 ATT.CONTROL AFT AGC FILTER1 Limiter 5 AGC DET. SIF LIMITER OUT RF AGC 3 OSD BRT DE-EMPHASIS NF + - 2 ATT 1 FM DET ATT INPUT SOUND N.F INPUT AFT TANK 46 VIF TANK 45 VIF TANK 11 44 VIF/SIF VCC fsc VXO 12 43 VIF OUT V/C/D VCC 13 LPF 27 D.L LINE OSD G IN V.DRI 26 H.DRI 25 OSD I/F H VCC OSD R IN ACC AMP 24 CONTRAST 32th VCO LPF 23 32th VCO AFC FILTER AFC DET. 22 Sharpness 21 H OUT D.L AMP H.V SEP FBP IN 20 X-ray X-RAY PROTECT IN B/W NC 19 Killer Y OUT BRIGHT 18 ACC DET G-Y OUT BLK 17 DEMO Matrix B-Y OUT TINT 16 Color R-Y OUT APC DET 15 INV CLAMP FILTER VCXO 14 IF AMP fsc VXO DET 47 42 KILLER FILTER 41 Delayed siganl IN 40 COLOR CONTROL 39 Contrast CONTROL 38 D.L DRIVE 37 V/C/D GND 36 SYNC.SEP.IN 35 CHROMA IN 34 Brightness CONTOL 33 Sharpness CONTROL 32 TINT CONTROL 31 VIDEO IN 30 V OUT 29 V SEP. FILTER 28 OSD B IN KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN CONFIGURATION Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 DESCRIPTION ATT. INPUT SOUND NF INPUT DE-EMPHASIS SIF DET. INPUT SIF LIMTER OUT AGC FILTER 1 AGC FILTER 2 VIF/SIF GROUND VIF INPUT VIF INPUT APC FILTER fsc VCXO V/C/D Vcc fsc VCXO CLAMP FILTER R-Y OUTPUT B-Y OUTPUT G-Y OUTPUT -Y OUTPUT X-RAY PROTECTOR FBP IN HORIZONTAL OUTPUT AFC FILTER 32fH VCO HORIZONTAL VCC OSD R INPUT OSD G INPUT PIN NO 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 DESCRIPTION OSD B INPUT V. SYNC SEP. FILTER VERTICAL OUTPUT VIDEO INPUT TINT CONTROL SHARPNESS CONTROL BRIGHTNESS CONTROL CHROMA INPUT SYNC. SEP. INPUT V/C/D GROUND DELAY LINE DRIVE CONTRAST CONTROL COLOR CONTROL DELAYED SIGNAL INPUT KLLER DET. FILTER VIF OUTPUT VIF/SIF VCC VIF TANK COIL VIF TANK COIL AFT TANK COIL AFT TANK COIL SIF INPUT ATT.CONTROL RF AGC OUTPUT RF AGC DELAY SOUND OUTPUT OSD BRIGHT CONTROL KA2161 PAL/NTSC 1 CHIP FOR C/TV ABSOLUTE MAXIMUM RATINGS (TA=25°C) Characteristic Supply Voltage Supply current Power dissipation Operating Temperature Storage Temperature Symbol VCCmax ICCmax PDmax TOPR TSTG Value 12 175 2.1 -20~+70 -55~+150 Unit V mA W °C °C ELECTRICAL CHARACTERISTICS (TA=25°C, VCC=9V) DC CHARACTERISTICS Characteristic Max. total current Total current ATT. input voltage Sound N.F input voltage FM Det. output voltage SIF tank input voltage SIF limiter output voltage IF AGC filter voltage (1) VIF input voltage VIF input voltage VIF Output voltage VIF tank input voltage VIF tank input voltage AFT tank input voltage SIF input voltage Sound output voltage Symbol ICCmax ICC V1 V2 V3 V4 V5 V6 V9 V10 V43 V45 V46 V47 V49 V53 Test Conditions Min 3.3 3.3 3.3 2.7 3.3 7.8 3.6 3.6 4.0 6.1 6.1 2.5 2.5 3.8 Typ 175 135 3.8 3.9 3.8 3.2 3.8 8.5 4.1 4.1 4.5 6.6 6.6 3.0 3.0 4.3 Max 4.5 4.5 4.5 3.7 4.3 4.6 4.6 5.0 7.1 7.1 3.5 3.5 4.8 Unit mA mA V V V V V V V V V V V V V V KA2161 PAL/NTSC 1 CHIP FOR C/TV IF SECTION (VIF, SIF) Characteristic Min. RF AGC voltage Max. RF AGC voltage VIF input sensitivity VIF max input AGC range Video output amplitude Sync. tip level Carrier leakage Black noise clamp level Black noise threshold level White noise clamp level White noise threshold level Max. AFT voltage Min. AFT voltage AFT det. sensitivity FM det. output level Sound distortion AM rejection SIF limiting voltage MAX. attenuation AF amp gain Y input impedance Y input dynamic range Max. video output level Min. video output level Video output drive current Video AC gain Brightness control DC restoration Clamp terminal voltage Contrast control voltage Contrast gain range V-blk pulse output level H-blk pulse output level V-blk pulse width (50Hz) V-blk pulse width (60Hz) Symbol V51h V51l VIS VIM GR VO VSYNC CL VBCI VBTI VWCI VWTI V48h V48l SAFT VO3 THD AMR VILIM GATT GAF YINP YD YMAX YMIN YSINK GY GBRT TDC VCLAMP VCONT GCONT VVBLK VHBLK VPVBLK VNVBLK Test Conditions Min 8.0 110 60 1.7 2.2 40 3.2 1.5 5.1 3.6 8.0 15 150 30 65 17 11 2.0 6.3 1.3 9 2.0 95 2.8 1.0 12 8.5 8.5 19 14 Typ 40 110 71 2.0 2.4 58 3.6 1.8 5.4 3.9 8.7 0.5 23 230 53 34 80 20 15 3.0 6.8 0.3 2.0 12 3.0 99 3.3 1.25 18 21 16 Max 1.0 45 2.3 2.7 4.0 2.1 5.7 4.2 1.0 30 350 1.0 45 23 20 7.3 0.7 3.0 15 4.0 3.8 1.5 24 23 18 Unit V V dBu dBu dB Vp-p V dB V V V V V V KHz/V mVms % dB dBu dB dB Kohm Vp-p V V mA dB times % V V dB V V H H KA2161 PAL/NTSC 1 CHIP FOR C/TV OSD SECTION Characteristic OSD input on current (R) OSD input on current (B) OSD input on current (G) OSD input off current (R) OSD input off current (B) OSD input off current (g) OSD output high level OSD output low level Output rise time Rise propagation delay Output fall time Fall propagation delay OSD → Y S/W time Y → OSD S/W time OSD → Y S/W delay time Y → OSD S/W delay time OSD → Y S/W time OSD brightness sensitivly Symbol IONR IONB IONG IOFFR IOFFB IOFFG VH VL TR TFPRO TF TFPRO TOY TYO TDOY TDYO TOY GBS Test Conditions Min 0.2 0.2 0.2 0.15 0.15 0.15 6.4 4.4 0.5 Typ 0.3 0.3 0.3 0.22 0.22 0.22 6.7 4.7 15 40 15 40 10 10 10 10 10 1 Max 0.4 0.4 0.4 0.3 0.3 0.3 6.9 5.0 100 100 100 100 100 100 100 100 100 1.5 Unit mA mA mA mA mA mA V V nsec nsec nsec nsec nsec nsec nsec nsec nsec times KA2161 PAL/NTSC 1 CHIP FOR C/TV CHROMA SECTION Characteristic ACC characteristic (1) ACC characteristic (2) Uni-color control voltage Uni-color control range Color control voltage Color control range Color residual voltage Tint control voltage Tint range 1(3.58MHz) Tint range 2(3.58MHz) PAL/NTSC S/W voltage Killer sensitivity (3.58MHz) Killer sensitivity (4.43MHz) Killer voltage (1) Killer voltage (2) APC pull in range(3.58MHz) APC pull in range(3.58MHz) APC hold in range(3.58MHz) APC hold in range(3.58MHz) APC pull in range(4.43MHz) APC pull in range(3.58MHz) Symbol A1 A2 VUNI GUNI VCOL GCOL VR VTINT TNTSC1 TNTSC2 VP/N KSN KSP VKIL1 VKIL2 f PN1 f PNH f HN1 f HNH f PP1 f PPH Test Conditions Min 0.5 0.9 0.8 20 0.8 20 0.8 35 -35 0.4 4.5 3.8 300 300 300 300 300 300 Typ 0.85 1.0 1.2 1.2 1.5 50 -50 0.7 1.0 1.0 4.8 4.1 500 500 500 500 500 500 Max 1.2 1.6 1.6 3. 2.5 1.4 3.0 3.0 5.1 4.4 - Unit Vp-p ratio V dB V dB mVp-p V deg deg V mVp-p mVp-p V V Hz Hz Hz Hz Hz Hz KA2161 PAL/NTSC 1 CHIP FOR C/TV CHROMA SECTION Characteristic APC hold range(4.43MHz) APC hold range(4.43MHz) Freq. sensitivity(3.58MHz) Freq. sensitivity(4.43MHz) Demo. color out R(NTSC) Demo. color out B(NTSC) Demo. color out G(NTSC) Demo. color out R(PAL) Demo. color out B(PAL) Demo. color out G(PAL) Demo relative amplitude(NSTC) Demo relative amplitude(NSTC) Demo relative amplitude(PAL) Demo relative amplitude(PAL) Demo relative phase(NTSC) Demo relative phase(NTSC) Demo relative phase(PAL) Demo relative phase(PAL) Demo residual carrier R Demo residual carrier G Demo residual carrier B Demo residual harmonic R Demo residual harmonic G Demo residual harmonic B Demo output band width R Demo output band width G Demo output band width B Demo output difference Demo output difference Demo output difference D.L amp characteristic Sweeper amplitude Sweeper amplitude Sweeper amplitude Sweeper period Sweeper period Sweeper period Symbol f HPH f HPL f SENN f SENP VM VBN VGN VRP VBP VGP NR/B NG/B PR/B PG/B NP R/B NP G/B PP R/B PP G/B VRCW VGCW VBCW VRHC VGHC VBHC fR fG fB VCOL1 VCOL2 VCOL3 VDL SV1 SV2 SV3 ST1 ST2 ST3 Test Conditions Min 300 300 0.5 0.5 2.9 3.3 0.9 1.2 2.2 0.7 0.8 0.28 0.43 0.27 100 225 78 226 1.0 1.0 1.0 -0.3 -0.3 -0.3 0.7 4.5 3.5 0.8 60 50 5 Typ 500 500 1.0 1.0 3.6 4.0 1.4 1.8 2.8 1.2 0.9 0.34 0.56 0.34 110 235 90 236 1.8 1.8 1.8 0 0 0 1.3 5.0 4.0 1.0 110 100 10 Max 1.5 1.5 4.7 4.7 1.9 2.4 3.4 1.7 1.1 0.48 0.69 0.46 120 245 96 246 20 20 20 100 100 100 3.0 3.0 3.0 0.3 0.3 0.3 2.1 5.5 4.5 1.4 140 120 15 Unit Hz Hz KHz/V KHz/V Vp-p Vp-p Vp-p Vp-p Vp-p Vp-p ratio ratio ratio ratio deg deg deg deg mVp-p mVp-p mVp-p mVp-p mVp-p mVp-p MHz MHz MHz V V V Vp-p V V V msec msec msec KA2161 PAL/NTSC 1 CHIP FOR C/TV DEFLECTION SECTION Characteristic Sync. sep. sensitivity current H AFC phase det. current 32fH VCO starting voltage H out osc. starting voltage H free running frequency H pull in range H hold range H pulse duty X-ray protector voltage X-ray protector hold voltage H output voltage (H) H output voltage (L) V output duty V output voltage (H) V output voltage (L) V pull in range(50Hz) V pull in range(60Hz) V free running freq(50Hz) V free running freq. (60Hz) 50/60Hz S/W voltage (50) 50/60Hz S/W voltage (60) 50/60Hz S/W voltage (50) 50/60Hz S/W voltage (60) H osc. control sensitivity Phase det. stop period(50) Phase det. stop period(60) Service S/W vert. voltage AFC voltage drift Osc. supply voltage drift 32 f H voltage AFC filter current AFC filter voltage Sync. sep. in voltage Symbol IIN ID VFH VH fH f HPULL f HHOLD TH V20 VH20 VHH VHL TV VVH VVL f VPP1 f VPP2 f VPN1 f VPN2 f VP1 f VN VSP VSN VIP VIN SH TPP1 TPP2 TPN1 TPN2 VSV VD VOSC V24 IAFC V23 V36 Test Conditions Min 10 200 2.0 4.0 15.4 +/-500 +/-500 41 1.1 4.7 9 4.7 52 62 40 49 5.0 2.5 4.5 0.5 2.0 290 3 240 3 4.0 30 6.5 2.2 Typ 20 300 3.0 4.4 15.6 43 1.3 5.0 0 10 5.0 0 60 44 67 53 44 53 6.0 3.0 5.0 1.0 4.0 309 5 259 5 5.0 7. 7.3 2.7 Max Unit 30 µA 400 µA 4.0 V 5.0 V 15.7 KHz Hz Hz 45 % 1.5 V 1.2 V 5.3 V 0.1 V 11 % 5.3 V 0.1 V Hz 49 Hz Hz 58 Hz 48 Hz 58 Hz 6.5 V 3.5 V 5.5 V 1.5 V 6.0 Hz/mV Hz Hz Hz Hz 0.5 Vp-p +/-0.6 V 3 % +/6.0 V 140 µA 8.0 V 3.2 V KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN NO. 1 FUNCTION ATT. IN. DESCRIPTION EQUIVALENT CIRCUIT Detected audio signals provided to ATT. Amp 1 2 SOUND N.F IN AC and DC feedback audio signals from power amp are supplied to A.F amp from ATT. 2 3 SOUND De-emphasis The external capacitor eliminates high frequency components in F.M det. 3 4 SIF Det.IN Connected SIF tank coil. The SIF limitting signal is supplied from SIF limiter (PIN 5). 4 FM DET. KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. 5 FUNCTION SIF limiter OUT DESCRIPTION EQUIVALENT CIRCUIT The limiting SIF signal is taken from limiter AMP. Limiter AMP 5 6 7 AGC filter 1 AGC filter 2 Connected external resistors, capacitors. Dual time constant improve high speed AGC time speed in TV. 7 6 8 9 10 VIF/SIF GND VIF/SIF GROUND IF IN IF input terminals provide IF output signals to IF AMP stage in differential AMP. 5 10 KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. FUNCTION 11 APC. filter 12 fsc VCO 14 fsc VCO DESCRIPTION EQUIVALENT CIRCUIT The APC filter terminal is connected external R,C The APC functions filtering AC signals and provide error voltage to fsc VCO block. 11 The fsc VCO is connected X-tal. 14 13 15 V/C/D GND Video/Chroma/Deflection GROUND CLAMP The clamp filter terminal is filter connected capacitor. Using clamp circuit, pedestal level of video signal is clamped. 15 12 KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. FUNCTION 16 17 18 R-Y OUT B-Y OUT G-Y OUT DESCRIPTION EQUIVALENT CIRCUIT Color output terminals for color differential signal. Demodulator 19 -Y OUT Terminal for -Y signal. 19 20 21 X-RAY protect IN FBP IN Terminal for X-ray protect turns on 1.4V Detected over voltage in CRT, X-ray protect stops oscillating the Hori. out Terminal for FBP input FBP signals are supplied from FBT. In order to synchronize Hori. scanning, The AFC compares Hori. sync with FBP signals. 20 21 KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. FUNCTION 22 Hori. OUT DESCRIPTION EQUIVALENT CIRCUIT Terminal for Hori. output 22 23 24 AFC filter 32fh VCO The AFC filter terminal is connected external R,C for low pass filter. AFC voltage provides error voltage to 32 fH VCO block. 23 To VCO This terminal is connected the 503 kHz resonator. 24 25 26 27 Hori. VCC OSD R IN OSD G IN 28 OSD B IN Hori. supply voltage is 9V. Terminal for OSD input OSD input signals are supplied from micro-controller,etc. It is suitable to interfacing OSD. To demodulator KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. 29 FUNCTION DESCRIPTION EQUIVALENT CIRCUIT Vert. separate Terminal for vert. separate filter filter is connected with external capacitor. 29 30 Vert. OUT Vert. output pulses provide vert. AMP block for driving D.Y coil. 30 31 VIDEO IN Terminal for video signal input 31 32 Sharpness control Using the external variable resistor, sharpness of video signals are changed for emphasis high freq. of video signals. 32 KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. 33 34 FUNCTION DESCRIPTION Tint control & PAL/NTSC SW Using the external variable resistor, tint of color are changed in NTSC system only Brightness Terminal for brightness control. EQUIVALENT CIRCUIT 33 control 34 35 Chroma IN Chroma signals are supplied from composite video signals using B.P.F 35 36 Sync.separate Sync. signals are taken from IN composite video signals using L.P.F. 36 37 V/C/C GND Video/Chroma/Deflection GROUND KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. 38 FUNCTION Delay Line drive OUT DESCRIPTION EQUIVALENT CIRCUIT Terminal for output of D.L AMP for 1 H delaye line. 38 39 Contrast Control Using the external variable resistor, contrast control is changed for controlled video/ color output level. 39 40 Color Control Using the external variable resistor, color is changed for controlled color output level. 40 41 Delayed signal INPUT & 50/60 Hz forced S/W Through the 1 H delay line chroma signals provide to demodulator block. And we can forcely select 50Hz: 3.0V 60Hz: 6.0V 41 KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. 42 43 FUNCTION Killer DET. filler VIF DET. OUT DESCRIPTION Terminal for killer detect filler. In case of no color signals or low RF input signals, Killer det. operates to kill the color process. EQUIVALENT CIRCUIT 42 Terminal for output of VIF DET. 43 44 45 46 VIF/SIF VCC VIF tank coil Supply voltage is 9V. Connected VIF tank coil between PIN 45 and PIN 46. VIF detector is quadurature detecting system using tank coil. 47 AFT tank coil Terminal for AFT tank coil If this pin is connected 100 § Úto ground, we defeat AFT function. 45 46 47 KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. 48 FUNCTION AFT OUT DESCRIPTION EQUIVALENT CIRCUIT Terminal for AFT output 48 49 SIF IN SIF signals provide to this terminal. 49 50 ATT. control Attenuation of sound output changes the external variable resistor 50 51 RF AGC OUT RF AGC OUT terminal feeds output voltage to tuner in order to improve AGC range This terminal is connected a pull-up resistor to Vcc. (open collector) 51 KA2161 PAL/NTSC 1 CHIP FOR C/TV PIN DESCRIPTION PIN No. FUNCTION DESCRIPTION 52 RF AGC delay control RF AGC delay control terminal is connected to external variable resistor. Using thr esternal variable resistor, RF AGC OUT delay point is changed for fitting the tuner characteristics. 53 Sound OUT EQUIVALENT CIRCUIT 52 Sound OUT terminal. Sound signals are provided to sound power AMP. 53 54 SOD brightness control OSD brightness control terminal 54 KA2161 PAL/NTSC 1 CHIP FOR C/TV APPLICATION CIRCUIT AFT OUT + 2.2¥ ì F 10K¥ Ø 4.7 ¥ ì F + 1 ATT IN 2 Sound IN Sound OUT 53 3 De-emp. RF AGC delay 52 4 SIF DET. IN RF AGC out 51 5 LIMITER OUT 6 AGC 1 152 103 Vcc(9V) 10K¥ Ø OSD Bright 54 SOUND OUT 2.2¥ ì F 103 10K¥ Ø 68K¥ Ø 10K¥ Ø 7pF + ATT. 50 103 683 SIF IN 5.1K¥ Ø 103 49 103 7 + 91K¥ Ø 22 8 IF GND AFT tank 47 9 VIF IN VIF tank 46 10 VIF IN VIF tank 45 1K¥ Ø 103 10K¥ Ø 10K ¥Ø IF INPUT AFT OUT 48 103 2.7K¥ Ø 103 AGC 2 220 ¥ Ø 47¥ ì F 10K ¥ Ø SAW 333 + 11 APC filter 12 fsc VCO 13 V/C/D Vcc IF Vcc 44 VIF OUT 43 Killer 42 + 2.2 ¥ ì F 3K¥ Ø 1.5K¥ Ø 10¥ ì F 6.2K¥ Ø 1.5K¥ Ø 103 10K ¥ Ø 103 33pF 2.7K¥ Ø 14 D.L IN 10K ¥ Ø 41 103 33pF + 40 16 R-Y Contrast 39 17 B-Y D.L out 38 18 G-Y V/C/D GND 37 19 -Y SYNC.IN 36 20 X-RAY IN Chroma IN 35 103 1K¥ Ø 100¥ Ø 100 ¥ Ø 0.47¥ ì H (N.P) 320¥ Ø 104 510K¥ Ø 3.3K¥ Ø 15¥ ì H 101 2K¥ Ø 10K¥ Ø 21 FBP IN Bright 34 68p 22 H-OUT Sharpness 33 23 AFC filter TINT 32 24 32fH VCO VIDEO IN 31 25 H Vcc V OUT 30 26 OSD R V SEPA 29 27 OSD G OSD B 28 1K¥ Ø 10K ¥ Ø 2.2 ¥ ì F + 103 10¥ ì F 0.47¥ ì F 200¥ ØCSG500F40 + 1.6K¥ Ø 103 10K ¥ Ø D.L 10K ¥ Ø 10K ¥ Ø 390 ¥ Ø 430¥ Ø 10K ¥ Ø 1.6K ¥Ø 13 ¥ìH 100¥ Ø 10K ¥ Ø 1K ¥ Ø 1H D.L 103 Color 5.1K ¥Ø CLAMP 103 10K ¥Ø 15 8.2¥ ì H 560 ¥ Ø 103 fsc VCo 150 ¥ Ø 473 X-TAL 103 + TO Vert. amp + 0.47 ¥ìF HORI. Vcc(9v) 103 10K ¥ Ø