New Product FGP20B thru FGP20D Vishay General Semiconductor Glass Passivated Ultrafast Rectifier FEATURES • Superectifier structure for high reliability condition SUPERECTIFIER • Cavity-free glass-passivated junction ® • Ultrafast reverse recovery time • Low forward voltage drop • Low leakage current • Low switching losses, high efficiency • High forward surge capability DO-204AC (DO-15) • Meets environmental standard MIL-S-19500 • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. IF(AV) 2.0 A VRRM 100 V to 200 V IFSM 50 A MECHANICAL DATA trr 35 ns VF 0.95 V IR 2.0 μA Case: DO-204AC, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified TJ max. 175 °C Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL FGP20B FGP20C FGP20D UNIT Maximum repetitive peak reverse voltage VRRM 100 150 200 V Maximum RMS voltage VRMS 70 105 140 V Maximum DC blocking voltage VDC 100 150 200 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TL = 75 °C IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Document Number: 88877 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product FGP20B thru FGP20D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 2.0 A FGP20B FGP20C VF TA = 25 °C Maximum DC reverse current at rated DC blocking voltage SYMBOL TA = 100 °C FGP20D UNIT 0.95 V 2.0 IR μA 50 Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 35 ns Typical junction capacitance 4.0 V, 1 MHz CJ 45 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL FGP20C 60 RJL (2) 20 RJA Typical thermal resistance FGP20B (1) FGP20D UNIT °C/W Notes (1) Thermal resistance from junction to ambient 0.375" (9.5 mm) lead length mounted on PCB with 0.47" x 0.47" (12 mm x 12 mm) copper pads (2) Thermal resistance from junction to lead at 0.375" (9.5 mm) lead length with both leads attached to heatsinks ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.424 54 4000 13" diameter paper tape and reel FGP20D-E3/54 FGP20D-E3/73 0.424 73 2000 Ammo pack packaging FGP20DHE3/54 (1) 0.424 54 4000 13" diameter paper tape and reel FGP20DHE3/73 (1) 0.424 73 2000 Ammo pack packaging Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 60 Peak Forward Surge Current (A) Average Forward Recitfied Current (A) 3.0 2.0 1.0 P.C.B. with 0.47" x 0.47" (12 mm x 12 mm) Copper Pads 0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 50 40 30 20 10 0 0 25 50 75 100 125 150 175 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 88877 [email protected], [email protected], [email protected] Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product FGP20B thru FGP20D Vishay General Semiconductor 1000 TJ = 175 °C 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 150 °C TJ = 25 °C 1 TJ = 125 °C 0.1 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 0.01 0.2 0.4 0.6 0.8 1.0 1.2 100 10 1 0.1 1.4 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 Instantaneous Reverse Leakage Current (μA) 100 TJ = 175 °C 10 TJ = 150 °C TJ = 125 °C 1 0.1 TJ = 25 °C 0.01 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Document Number: 88877 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000