1N5391GP thru 1N5399GP Vishay General Semiconductor Glass Passivated Junction Rectifier FEATURES SUPERECTIFIER • Superectifier application ® structure for high reliability • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current, typical IR less than 0.1 μA • High forward surge capability • Meets environmental standard MIL-S-19500 DO-204AC (DO-15) • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application PRIMARY CHARACTERISTICS IF(AV) 1.5 A VRRM 50 V to 1000 V IFSM 50 A IR 5.0 μA VF 1.4 V TJ max. 175 °C MECHANICAL DATA Case: DO-204AC, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) (1) SYMBOL 1N53 91GP 1N53 92GP 1N53 93GP 1N53 94GP 1N53 95GP 1N53 96GP 1N53 97GP 1N53 98GP 1N53 99GP UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 500 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 210 280 350 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 300 400 500 600 800 1000 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TL = 70 °C IF(AV) 1.5 A Peak forward surge current 8.3 ms single half sine-wave super-imposed on rated load IFSM 50 A Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length at TA = 70 °C IR(AV) 300 μA TJ, TSTG - 65 to + 175 °C PARAMETER Operating junction and storage temperature range Note (1) JEDEC registered values Document Number: 88515 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N5391GP thru 1N5399GP Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.5 A SYMBOL 1N53 92GP 1N53 93GP 1N53 94GP 1N53 95GP VF (1) TA = 70 °C Maximum DC reverse current at rated DC blocking voltage 1N53 91GP TA = 25 °C 1N53 96GP 1N53 97GP 1N53 98GP 1N53 UNIT 99GP 1.4 V 5.0 IR (1) μA TA = 150 °C 300 Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 2.0 μs Typical junction capacitance 4.0 V, 1 MHz CJ 15 pF Note (1) JEDEC registered values THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL 1N53 91GP 1N53 92GP 1N53 93GP 1N53 94GP 1N53 95GP RJA (1) Typical thermal resistance 1N53 96GP 1N53 97GP 1N53 98GP 1N53 UNIT 99GP 45 °C/W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1N5397GP-E3/54 0.425 54 4000 13" diameter paper tape and reel 1N5397GP-E3/73 0.425 73 2000 Ammo pack packaging 1N5397GPHE3/54 (1) 0.425 54 4000 13" diameter paper tape and reel 1N5397GPHE3/73 (1) 0.425 73 2000 Ammo pack packaging Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 2.0 TL = Lead Temperature 1.0 TA = Ambient Temperature 0.5 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length TJ = TJ Max. 8.3 ms Single Half Sine-Wave 40 30 20 10 0 0 0 25 50 75 100 125 150 175 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 88515 [email protected], [email protected], [email protected] Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N5391GP thru 1N5399GP Vishay General Semiconductor 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 1 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 0.1 0.01 0.4 10 1 0.6 0.8 1.0 1.2 1.4 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 10 Instantaneous Reverse Leakage Current (μA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 125 °C 1 TJ = 75 °C 0.1 TJ = 25 °C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Document Number: 88515 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1