V i s h ay I n t e r t e c h n o l o g y, I n c . VLSL 3 0 - LDK / VLSL 31- LDK o p t o e l e c t r o n i cs LED Lighting Development Kit P ROD U C T O V ER V IE W w w w. v i s h a y. c o m LED Lighting Development Kit Vishay Semiconductors Introduction Vishay’s LED Lighting Development Kit is designed to give you everything you need to get up to speed designing with our solidstate lighting solutions. The kit includes an LED lighting panel, reflectors, and a driver module. It provides the basic tools to help you avoid development delays and focus on getting your product to market quickly, while adopting energy-efficient, environmentally friendly, long-lifetime LED lighting technology. Lighting Panel: VLSL30 and VLSL31 121 mm The fully populated LED lighting panel included in each kit consists of 4 strings of 6 LEDs mounted on a single-sided, single-layer, copper-based PCB. A shiny white surface provides a small degree of reflectivity of incident light. The copper surface helps conduct heat away from the LEDs. Two lighting panels are available. The cool white panel features Vishay’s VLMW711U2U3XV high bright white LEDs with color temperatures from 5000 K to 7000 K and has luminous flux of 2160 lumens. The neutral white panel features Vishay’s VLMW711T3U2US LEDs with color temperatures from 3800 K to 5000 K and has luminous flux of 1900 lumens. 135 mm 18.5 20 20.0 Reflector Mounting Holes Reflectors: VLSL-REFL01 Aluminum alloy reflectors are provided to enable you to control the viewing angles and the pattern of illumination. As shown below, without reflectors the viewing angle is 120°. This viewing angle can be tightened to 55° with the use of the reflectors. Five reflectors are provided with each kit. With reflectors, pattern is 55º x 120º oval Vishay Intertechnology Without reflectors, pattern is ~120º cone For technical support, contact: [email protected] www.vishay.com LED Lighting Development Kit Vishay Semiconductors Driver: VLSL3-DU The LED Driver board provides power to one or two panels. It provides a constant current source to up to 8 strings of 6 LEDs. A 12-V DC source is required to power the driver. The board features undervoltage and overvoltage protection. The driver’s operating temperature is from – 40 °C to + 105 °C. Every component on the board is AEC-Q101 qualified and, where possible, sourced from Vishay. Each kit comes with one driver module. • • • • • • DC input supply voltage: 12 V, typical (11 V to 16 V) Input current: 2 A, typical Output current, constant: 1.4 A (4 strings at 350 mA) Output voltage (ƒ∑Vf-string): 19.5 V, typical (18 V to 24 V) Maximum operating temperature: - 40 °C to + 105 °C Current source outputs ESD protected: > 30 kV, IEC 61000-4-2 • Standby current: 20 mA maximum at 25 °C • RS232 digital interface • Ambient light sensor input - Driver will adjust the pulse width modulation to one of four settings: 100 %, 75 %, 50 %, or 25 % 1-Anode 1-Cathode 4 1-Cathode 3 1-Cathode 2 1-Cathode 1 2-Anode 2-Cathode 4 2-Cathode 3 2-Cathode 2 2-Cathode 1 NC PWM-In PWM-Out PGND ALS-Anode ALS-Cathode 1-Power_GND 1-Power_+12V 2-Power_GND 2-Power_+12V Kit Ordering Information Panel Part Number Cool White VLSL30 VLSL30-LDK √ VLSL31-LDK Natural White VLSL31 √ Number of Panels Number of Reflectors VLSL-REFL01 Number of Drivers VLSL3-DU 1 5 1 DISCLAIMER All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Vishay Intertechnology For technical support, contact: [email protected] www.vishay.com Semiconductors: Rectifiers • High-Power Diodes and Thyristors • Small-Signal Diodes • Zener and Suppressor Diodes • FETs • Optoelectronics • ICs • Modules Passive Components: Resistive Products • Magnetics • Capacitors One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components Worldwide Sales Contacts The Americas EUROPE United states Germany Vishay Americas One Greenwich Place Shelton, CT 06484 United States Ph: +1-402-563-6866 Fax: +1-402-563-6296 Vishay Electronic GmbH Geheimrat-Rosenthal-Str. 100 95100 Selb Germany Ph: +49-9287-71-0 Fax: +49-9287-70435 Asia france singapore Vishay intertechnology Asia Pte Ltd. 37A Tampines Street 92 #07-00 Singapore 528886 Ph: +65-6788-6668 Fax: +65-6788-0988 Vishay S.A. 199, blvd de la madelEine 06003 nice, cedex 1 France Ph: +33-4-9337-2727 Fax: +33-4-9337-2726 p.r. China united kingdom Vishay China Co., Ltd. 15D, Sun Tong Infoport Plaza 55 Huai Hai West Road Shanghai 200030 P.R. China PH: +86-21-5258 5000 FAX: +86-21-5258 7979 Vishay Ltd. Suite 6C, Tower House St. Catherine’s Court Sunderland Enterprise Park Sunderland SR5 3XJ UNITED KINGDOM Ph: +44-191-516-8584 Fax: +44-191-549-9556 japan VISHAY JAPAN CO., LTD. Shibuya Prestige Bldg. 4F 3-12-22, Shibuya Shibuya-ku Tokyo 150-0002 Japan Ph: +81-3-5466-7150 fax: +81-3-5466-7160 Build Vishay into your Design w w w. v i s h a y. c o m VMN-PL0448-1005