Ordering number: EN2623D Monolithic Linear IC LA6500 Power Operational Amplifier Features Package Dimensions . High output current (Io max = 1.0 A) . High gain . With current limiter . Capable of being operated from single supply unit : mm 3079-SIP-5H [LA6500] SANYO : SIP-5H Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Differential input voltage Symbol VCC/VEE Conditions Ratings ±18 Unit V VIDIf 30 V Common-mode input voltage VICOM ±15 V Output current Io max 1.0 A Allowable power dissipation Pd max 1.75 W Operating temperature Topr –20 to +75 °C Storage temperature Tstg –55 to +150 °C SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 32896HA(II)/7297TA,TS No.2623-1/3 LA6500 Operating Characteristics at Ta = 25°C, VCC/VEE = ±15 V Parameter Quiescent current dissipation Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection Maximum output voltage Voltage gain Slew rate Equivalent input noise voltage Supply voltage rejection Limiting current Symbol ICCO VIO IIO IB Conditions Rs % 10 kΩ VICM CMR Vo VGO SR VNI SVR ISC min typ 6 2 10 100 –15 RL = 33 Ω GV = 0, RL = 33 Ω, R = 2.2 Ω, L = 0.1 µF Rg = 1 kΩ, DIN Audio 80 ±13 100 0.15 2 30 1.00 max Unit mA mV nA nA +13 V dB V dB V/µs µV µV/V A Allowable power dissipation, Pd max – W Sample Application Circuit Infinite heat sink 5°C/W heat sink 10°C/W heat sink 20°C/W heat sink No heat sink Ambient temperature, Ta – °C No.2623-2/3 LA6500 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: 1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: 2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 1996. Specifications and information herein are subject to change without notice. No.2623-3/3