SANYO SGF31

Ordering number : ENN7055A
SGF31
N-Channel GaAs MESFET
SGF31
For C to Ku-band Local Oscillator and Amplifier
Features
•
•
•
Package Dimensions
Lower phase noise.
The chip surface is covered with the highly reliable
protection film.
Super miniaturized plastic-mold package (CP4).
Automatic surface mounting is available.
unit : mm
2134A
[SGF31]
1.9
0.95 0.95
0.5
•
0.4
4
0.16
3
1
2
0.6
0.95 0.85
2.5
0.5
1.5
0 to 0.1
1 : Gate
2 : Source
3 : Drain
4 : Source
0.8
1.1
2.9
SANYO : CP4
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Drain-to-Source Voltage
VDS
6
Gate-to-Source Voltage
VGS
--5
Drain Current
ID
Allowable Power Dissipation
Junction Temperature
Storage Temperature
Tstg
V
V
100
mA
PD
200
mW
Tj
150
°C
--55 to +150
°C
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Gate-to-Source Leakage Current
Saturated Drain Current
Gate-to-Source Cutoff Voltage
Forward Transfer Admittance
IGSO
IDSS
VGS(off)
yfs
Conditions
VGS=--5V
VDS=3V, VGS=0
VDS=3V, ID=100µA
Ratings
min
typ
max
Unit
--10
µA
30
50
70
mA
--0.5
--1.6
--2.7
VDS=3V, ID=10mA
34
V
mS
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
11802 GI IM / 91001 GI IM No.7055-1/5
SGF31
S-Parameter
SGF31
FREQUENCY
MHz
S11
MAG
S21
ANG
MAG
VDS=3V IDS=30mA
S22
S12
ANG
MAG
ANG
MAG
ANG
3000.0000
.671
--120.6
2.964
81.8
.098
34.1
.514
--39.1
4000.0000
.585
--148.0
2.559
61.8
.104
31.2
.441
--52.3
5000.0000
.552
--173.3
2.276
43.0
.114
27.9
.389
--66.5
6000.0000
.550
163.0
2.044
24.7
.131
23.5
.342
--82.7
7000.0000
.573
141.4
1.850
6.8
.154
16.7
.299
--102.3
8000.0000
.611
122.0
1.686
--10.6
.178
7.6
.261
--126.3
9000.0000
.656
104.6
1.541
--27.6
.200
--2.5
.236
--155.4
10000.0000
.702
88.9
1.408
--44.2
.220
--13.0
.235
172.0
11000.0000
.747
74.5
1.284
--60.3
.240
--23.7
.263
140.4
12000.0000
.789
61.1
1.167
--76.1
.260
--35.0
.316
113.3
13000.0000
.827
48.4
1.058
--91.6
.277
--47.0
.384
90.7
14000.0000
.858
35.8
.954
--107.0
.289
--59.5
.457
71.4
15000.0000
.883
23.4
.848
--122.3
.296
--72.0
.533
54.1
16000.0000
.905
11.5
.716
--137.8
.299
--83.6
.625
37.8
SGF31
FREQUENCY
GUmax
GAmax
S21^2
S12^2
MHz
dB
dB
dB
dB
3000.0000
13.37
4000.0000
10.93
5000.0000
K
Delay
nsec
Mason’s U
dB
VDS=3V IDS=30mA
G1
G2
dB
dB
9.44
--20.21
.81
.057
20.258
2.60
1.33
12.95
8.16
--19.66
1.02
.054
18.447
1.82
.94
9.43
10.83
7.15
--18.87
1.13
.052
17.436
1.58
.71
6000.0000
8.32
9.79
6.21
--17.66
1.12
.051
17.386
1.56
.54
7000.0000
7.48
9.39
5.34
--16.27
1.05
.049
18.673
1.73
.41
8000.0000
6.87
4.54
--15.01
.97
.048
23.592
2.03
.31
9000.0000
6.45
3.76
--13.99
.88
.047
2.44
.25
10000.0000
6.17
2.97
--13.14
.80
.046
2.95
.25
11000.0000
6.02
2.17
--12.39
.73
.044
3.54
.31
12000.0000
6.03
1.34
--11.70
.65
.044
4.22
.46
13000.0000
6.17
.49
--11.14
.57
.043
4.99
.69
14000.0000
6.40
--.41
--10.77
.49
.043
5.79
1.02
15000.0000
6.57
--1.43
--10.58
.43
.043
6.55
1.45
16000.0000
6.68
--2.90
--10.50
.36
.043
7.43
2.15
No.7055-2/5
SGF31
S-Parameter
VDS=3V IDS=30mA, START 3 GHz STOP 16 GHz
S11
S21
90˚
50
25
12.
0
0
9.
150
150˚
200
250
.0
30˚
15
6.0
25
10
3.0
100
10
0
60˚
120˚
50
100
6.0
250
150
5
--180˚
--250
--200
--150
--10
3.0
12.0
15.
0
9.0
--30˚
--150˚
--100
--25
Rmax=1
--50
--60˚ R max=5
--120˚
--90˚
IT03175
S12
IT03176
S22
90˚
50
60˚
120˚
25
100
10
3.0
150
15.0
30˚
150˚
200
250
12
.0
6.0
--180˚
9.0
0.5
0
10
25
50
100
150
250
12.
0
6.0
--10
--30˚
--150˚
.0
15
--60˚ R max=0.5
--90˚
IT03177
--250
--200
--150
--100
R max=1
--25
--120˚
3.0
9.0
--50
IT03178
No.7055-3/5
SGF31
Oscillation Characteristics Measured by the Application JIG for SGF31
Equivalent Circuit of the Application JIG
(Recommended bias condition is VD=5V, ID=35mA)
VD
1000pF
10Ω
Dielectric Resonator
G
Z0, θB
D
S
GaAsMESFET
OUTPUT
51Ω
10Ω
REF 20.0 dBm
MKR-TRK 10.678 GHz
10.8 dBm
ATTEN 30 dB
VD=5V
ID=34.0mA
PEAK
LOG
10
dB /
[hp] 3048A Carrier : 10.678GHz
0
VD=5V
ID=34.0mA
at@ 1kHz --60.0 dBc / Hz
--10
--20
--30
--40
MARKER
10.678 GHz
10.8 dBm
--50
--60
--70
--80
--90
--100
WA SB
SC FS
CORR
--110
--120
--130
RES BW 10 kHz
VBW 10 kHz
SPAN 1.000 MHz
SWP 30 ms
IT03173
--140
--150
100
2
3
5 7 1k
2
3
5 710k
2
3
5 7100k
[f] [dBc / Hz] VS f [Hz]
IT03174
No.7055-4/5
SGF31
Amplification Characteristics Measured by the DUT
Pout VS Pin
18
Pout(dBm)
15
f=11GHz
VDS=3V
ID=30mA
GLP=5.2dB
P1dB=15.6dBm
5.2
)=
G
B
(d
LP
2
4.
10
5
0
--5
0
5
Pin(dBm)
10
15
IT03609
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of January, 2002. Specifications and information herein are subject
to change without notice.
PS No.7055-5/5