Ordering number : ENN0000 SMA4203 Si Monolithic Linear IC SMA4203 Oscillator IC for Laser Diode Noise Suppression Applications Preliminary Package Dimensions unit : mm 0000 0.25 5 0.15 4 0 to 0.1 1.25 2.1 6 0.2 0.425 [SMA4203] 0.2 0.425 3 0.9 1 2 0.65 2.0 (2) and (5) are common terminals. Specifications Please ground either of them. SANYO : MCP6 Absolute Maximum Ratings at Ta=25°C Parameter Symbol 1 : LC 2 : GND 3 : OPEN 4 : VCC 5 : GND 6 : OUT Conditions Ratings Unit Supply Voltage VCC 6.0 V Supply Current 60 mA Allowable Power Dissipation ICC PD 280 mW Operating Temperature Topr --20 to +85 °C Storage Temperature Tstg --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Supply Current ICC Posc Oscillation Power Ratings Conditions min VCC=5V, RL=50Ω, fosc=400MHz VCC=5V, RL=50Ω, fosc=400MHz typ max Unit 37 42 47 mA 4.5 7 8.5 dBm NOTE : * Oscillation frequency mainly depends on the external LC. (The LC is attached additionally to the LC terminal in series.) * Recommended oscillation frequency. 350MHz to 450MHz Marking : S2W Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN HD seigi 011030 / 60601 TS IM NAKATANI No.0000-1/3 SMA4203 [Reference data] Oscillation Frequency vs L, C Power Supply Voltage vs Oscillation Power L=47nH, C=10pF L C nH pF --3.0 68 --0.4 68 18.8 1.4 3.2 21.5 3.4 3.6 Power Supply Voltage Supply Current Oscillation Power Oscillation Frequency ICC mA Pout fosc V dBm MHz 68 3.0 19.3 2.3 284 68 4.0 31.3 6.0 289 68 68 5.0 41.5 7.0 295 2.8 47 7 3.0 18.8 1.4 406 24.0 3.9 47 7 4.0 31.2 5.4 406 26.5 4.5 47 7 5.0 41.8 6.6 405 3.8 28.9 5.0 68 7 3.0 19.0 2.1 336 4.0 31.2 5.4 68 7 4.0 31.5 5.9 337 4.2 33.4 5.8 68 7 5.0 42.0 6.8 340 4.4 35.6 6.0 82 7 3.0 18.9 1.9 310 4.6 37.7 6.2 82 7 4.0 31.4 5.9 312 4.8 39.7 6.4 82 7 5.0 41.8 6.8 316 5.0 41.8 6.6 100 7 3.0 18.6 1.5 290 100 7 4.0 31.4 5.8 292 100 7 5.0 41.7 6.8 297 VCC Oscillation Power V ICC mA 2.6 13.0 2.8 16.0 3.0 dBm VCC Equivalent Circuit VCC LC OUT GND Test Circuit 47pF 1 RF 6 OUTPUT 47nH 2 5 3 4 VCC 10pF 1000pF No.0000-2/3 SMA4203 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2001. Specifications and information herein are subject to change without notice. PS No.0000-3/3