Ordering number : 000000 FW262 N-Channel Silicon MOSFET FW262 Preliminary Features • • Package Dimensions Low ON-resistance. 2.5V drive. unit : mm 0000 [FW262] 5 4 0.2 1.8max 1 6.0 4.4 0.3 8 0.595 Specifications 1.27 0.43 0.1 1.5 5.0 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : SOP8 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 30 Gate-to-Source Voltage VGSS ±10 V 9 A Drain Current (DC) ID Drain Current (Pulse) IDP PD Allowable Power Dissipation Total Dissipation Channel Temperature PT Tch Storage Temperature Tstg V PW≤10µs, duty cycle≤1% 52 A Mounted on a ceramic board (1000mm2✕0.8mm) 1.7 W Mounted on a ceramic board (1000mm2✕0.8mm) 2.0 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS Conditions ID=1mA, VGS=0 VDS=30V, VGS=0 VGS(off) yfs VGS=±8V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=9A RDS(on)1 RDS(on)2 ID=9A, VGS=4V ID=2A, VGS=2.5V Ratings min typ Unit max 30 V 1 µA ±10 µA 1.3 V 12 16 mΩ 14 20 mΩ 0.4 19.5 Marking : W262 28 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN HD 010528-1/2 FW262 Continued from preceding page. Parameter Symbol Conditions Ratings min typ max Unit Input Capacitance Ciss pF Coss VDS=10V, f=1MHz VDS=10V, f=1MHz 2350 Output Capacitance 390 pF Reverse Transfer Capacitance Crss VDS=10V, f=1MHz 330 pF Turn-ON Delay Time td(on) See specified Test Circuit 25 ns Rise Time tr td(off) See specified Test Circuit 240 ns See specified Test Circuit 215 ns tf Qg See specified Test Circuit 295 ns VDS=10V, VGS=10V, ID=9A 72 nC Gate-to-Source Charge Qgs nC Qgd VDS=10V, VGS=10V, ID=9A VDS=10V, VGS=10V, ID=9A 5 Gate-to-Drain “Miller” Charge 7.8 nC Diode Forward Voltage VSD IS=9A, VGS=0 Turn-OFF Delay Time Fall Time Total Gate Charge 0.82 1.2 V Switching Time Test Circuit VDD= 15V VIN 4V 0V ID= 9A RL=1.67Ω VIN D VOUT PW=10µs D.C.≤1% G P.G FW262 50Ω S Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2001. Specifications and information herein are subject to change without notice. HD 010528-2/2