IM-10RFCM-13 Vishay Dale Inductors Commercial, Molded FEATURES • Inductance range is 1 µH to 2200 µH • Proven reliability molded inductors RoHS COMPLIANT ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % on Q-Meter for 1 µH to 22 µH. ± 5 % 1000 cps bridge for 27 µH to 2200 µH. NOTE: L and Q are not always tested at the same frequency. Inductance values tested on Q-Meter, are tested at standard test frequencies. Dielectric Strength: 700 VRMS at sea level Operating Temperature: - 55 °C to + 125 °C Self-Resonant Frequency: Minimum SRF measured with full length leads on Grid-Dip Meter Q: Measured on Q-Meter Rating: 1/3 watt dissipation for M Models STANDARD ELECTRICAL SPECIFICATIONS IND. (µH) TOL. Q MIN. IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 IM-10RFCM-13 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 2200 ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 100 100 100 95 95 68 60 60 60 65 70 65 65 65 75 65 65 65 80 80 100 100 100 100 100 95 90 85 85 80 80 75 75 65 65 65 70 60 70 15 15 10 10 10 7.9 7.9 7.9 7.9 7.9 7.9 7.9 5 5 4 4 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.5 1.5 1 1 1 1 0.80 0.80 0.80 0.80 0.80 0.80 0.50 0.25 0.25 SRF MIN. (MHz) 136 124 112 100 88 76 72 70 60 56 52 46 40 36 32 30 28 25 22 20 19 18 16 14 13 11 9 7 5.5 4.5 3.5 3.0 2.8 2.5 2.2 2.0 1.8 2.2 1.6 RATED* DCR DC MAX. CURRENT (Ohms) (mA) 0.04 0.04 0.04 0.05 0.05 0.05 0.05 0.07 0.09 0.14 0.17 0.25 0.32 0.47 0.62 0.72 0.80 1.2 1.5 2.3 3.0 4.2 5.2 6.2 7.0 7.5 8 9 10 11 12 13 14 16 17 19 21 22 30 2700 2700 2700 2500 2500 2500 2500 2100 1800 1550 1300 1150 1000 870 730 660 600 520 450 380 300 270 250 220 200 200 190 185 180 172 165 157 150 145 140 132 125 120 100 MECHANICAL SPECIFICATIONS Terminal Strength: Meets 5 pound pull test when tested per MIL-PRF-15305 DENSITY SPECIFICATIONS Weight: 2 grams maximum ENVIRONMENTAL SPECIFICATIONS Moisture: Meets requirements of MIL-PRF-15305. Shock Resistance: Meets requirements of MIL-PRF-15305. Vibration: High frequency, 10 Hz to 2000 Hz at 20 G ± 10 % maximum for 12 logarithmic swings, each of 20 minute duration repeated for each of three mutually perpendicular planes. IRON CORE MODEL* TEST FREQ. (MHz) DIMENSIONS in inches [millimeters] .250 [6.35] Dia. Max. 1.30 [33.02] Typ. Min. #21 .028 ± .002 [.71± .051] TCW .600 [15.24] Max. MARKING *Model electricals and tolerances shown. — Color coded ORDERING INFORMATION IM-10RFCM-13 1.0 µH 10 % EZ e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M 1 0 MODEL Document Number: 34037 Revision: 10-Aug-06 R F C M E Z PACKAGE CODE 1 R 0 INDUCTANCE VALUE For technical questions contact: [email protected] K INDUCTANCE TOLERANCE 1 3 SERIES www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1