STMICROELECTRONICS 74VCX1632245TB

74VCX1632245
16-BIT DUAL SUPPLY BUS TRANSCEIVER
LEVEL TRANSLATOR WITH A SIDE SERIES RESISTOR
■
■
■
■
■
■
■
■
■
■
HIGH SPEED: tPD = 4.4ns (MAX.) at TA=85°C
VCCA = 3.0V VCCB = 2.3V
LOW POWER DISSIPATION:
ICCA = ICCB = 20µA(MAX.) at TA=85°C
SYMMETRICAL OUTPUT IMPEDANCE:
|IOHA| = IOLA = 8mA MIN at
VCCA = 3.0V VCCB = 1.65V or 2.3V
|IOHA| = IOLA = 18mA MIN at
VCCA = 2.3V VCCB = 1.65V)
BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
POWER DOWN PROTECTION ON INPUTS
AND OUTPUTS
26Ω SERIES RESISTOR ON A SIDE OUTPUTS
OPERATING VOLTAGE RANGE:
VCCA(OPR) = 2.3V to 3.6V (1.2V Data
Retention)
VCCB(OPR) = 1.65V to 2.7V (1.2V Data
Retention)
PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 16245
LATCH-UP PERFORMANCE EXCEEDS
500mA (JESD 17)
ESD PERFORMANCE:
HBM > 2000V (MIL STD 883 method 3015);
MM > 200V
DESCRIPTION
The 74VCX1632245 is a dual supply low voltage
CMOS 16-BIT BUS TRANSCEIVER fabricated
with sub-micron silicon gate and five-layer metal
wiring C2MOS technology. Designed for use as an
interface between a 3.3V bus and a 2.5V or 1.8V
bus in a mixed 3.3V/1.8V,3.3V/2.5V and 2.5V/
1.8V supply systems, it achieves high speed
operation while maintaining the CMOS low power
dissipation.
This IC is intended for two-way asynchronous
communication between data buses and the
direction of data transmission is determined by
nDIR inputs. The enable inputs nG can be used to
disable the device so that the buses are effectively
isolated. The A-port interfaces with the 3V bus, the
B-port with the 2.5V and 1.8V bus.
All inputs are equipped with protection circuits
against static discharge, giving them 2KV ESD immunity and transient excess voltage. All floating
bus terminals during High Z State must be held
HIGH or LOW.
September 2003
TSSOP
TFBGA
µTFBGA
ORDER CODES
PACKAGE
TRAY
TSSOP48
TFBGA54 74VCX1632245LB
µTFBGA42 74VCX1632245TB
T&R
74VCX1632245TTR
74VCX1632245LBR
74VCX1632245TBR
LOGIC DIAGRAM
n = 1, 2
1/15
74VCX1632245
INPUT AND OUTPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
TFBGA54 PIN No
µTFBGA42 PIN No
TSSOP PIN No
SYMBOL
A3
J3
A6, B5, B6, C5,
C6, D5, D6, E5
E6, F5, F6, G5,
G6, H5, H6, J6
A1, B2, B1, C2,
C1, D2, D1, E2
E1, F2, F1, G2,
G1, H2, H1, J1
J4
A4
D3, D4, E3, E4,
F3, F4
A2, A5, B3, B4,
H3, H4, J2, J5
C4, G4
B3
F3
A4, A5, A6, B5,
B6, C5, C6, D5
D6, E5, E6, F5,
F6,G4, G5, G6
A3, A2, A1, B2,
B1, C2, C1, D2
D1, E2, E1, F2,
F1,G3, G2, G1
F4
B4
C3, C4, E3, E4
1DIR
2DIR
1A1 to 1A8
Directional Controls
Directional Controls
Data Inputs/Outputs
2A1 to 2A8
Data Inputs/Outputs
1B1 to 1B8
Data Inputs/Outputs
2B1 to 2B8
Data Inputs/Outputs
G2
G1
GND
Output Enable Inputs
Output Enable Inputs
Ground (0V)
-
1
24
47, 46, 44, 43,
41, 40, 38, 37
36, 35, 33, 32,
30, 29, 27, 26
2, 3, 5, 6,
8, 9, 11, 12
13, 14, 16, 17,
19, 20, 22, 23
25
48
4, 10, 15, 21,
28, 34, 39, 45
-
D4
42, 31
VCCA
Positive Supply Voltage
C3, G3
D3
7, 18
VCCB
Positive Supply Voltage
2/15
NC
NAME AND FUNCTION
No Connected
74VCX1632245
PIN CONNECTION (top view for TSSOP, top through view for BGA)
TSSOP
TFBGA
µTFBGA
TRUTH TABLE
INPUTS
FUNCTION
OUTPUT
G
DIR
A BUS
B BUS
L
L
H
L
H
X
OUTPUT
INPUT
Z
INPUT
OUTPUT
Z
A=B
B=A
Z
X=Don’t care; Z=High Impedance
3/15
74VCX1632245
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCCA
Supply Voltage
-0.5 to +4.6
V
VCCB
Supply Voltage
-0.5 to +4.6
V
DC Input Voltage
-0.5 to +4.6
V
VI/OA
DC I/O Voltage (Output disabled)
-0.5 to +4.6
V
VI/OB
DC I/O Voltage (Output disabled)
VI/OA
DC I/O Voltage
VI/OB
DC I/O Voltage
VI
-0.5 to +4.6
V
-0.5 to VCCA + 0.5
-0.5 to VCCB + 0.5
V
V
IIK
DC Input Diode Current
− 20
mA
IOK
DC Output Diode Current
− 50
mA
IOA
DC Output Current
± 50
mA
IOB
DC Output Current
± 50
mA
ICCA
DC VCC or Ground Current
± 100
mA
ICCB
DC VCC or Ground Current
± 100
mA
Pd
Power Dissipation
Tstg
Storage Temperature
TL
Lead Temperature (10 sec)
400
mW
-65 to +150
°C
300
°C
Absolute Maximum Ratings are those value beyond which damage to the device may occur. Functional operation under these conditions is
not implied
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Value
Unit
V
VCCA
Supply Voltage
2.3 to 3.6
VCCB
Supply Voltage
1.65 to 2.7
V
Input Voltage (Dir, G)
0 to VCCB
0 to VCCA
V
0 to VCCB
-40 to 85
V
°C
0 to 10
ns/V
VI
VI/OA
I/O Voltage
VI/OB
I/O Voltage
Top
dt/dv
Operating Temperature
Input Rise and Fall Time (note 1)
1) VIN from 0.8V to 2.0V at VCC =3.0V
4/15
V
74VCX1632245
DC SPECIFICATION FOR VCCA
Test Condition
Symbol
VIHA
VILA
VOHA
VOLA
Parameter
High Level Input
Voltage (An)
Low Level Input
Voltage (An)
High Level
Output Voltage
Low Level
Output Voltage
IOZA
Input Leakage
Current
High Impedance
Output Leakage
Current
IOFF
Power Off
Leakage Current
ICCtA
Quiescent
Supply Current
∆ICCtA
Maximum
Quiescent
Supply Current /
Input (An)
IIA
Value
TA = 25 °C
VCCB VCCA
(*)
(*)
(V)
(V)
Min.
1.8
1.8
2.5
1.8
1.8
2.5
2.5
3.3
3.3
2.5
3.3
3.3
1.6
2.0
2.0
Typ.
-40 to 85 °C
Max.
Min.
Max.
1.6
2.0
2.0
0.7
0.8
0.8
V
0.7
0.8
0.8
2.3
3.0
IO=-100µA
2.8
2.8
2.3
3.0
IO=-8mA
2.4
2.4
1.65
3.0
IO=-8mA
2.4
2.4
1.65
2.3
IO=-6mA
1.8
1.8
Unit
V
V
2.3
3.0
IO=100µA
0.2
0.2
2.3
3.0
IO=8mA
0.55
0.55
1.65
3.0
IO=8mA
0.55
0.55
1.65
2.3
IO=6mA
0.40
0.40
2.7
3.6
VI = VCC or GND
± 0.5
±5
µA
2.7
3.6
VIA = GND or 3.6V
VIB = VIHB or VILB
G = VCCB
± 1.0
± 10
µA
0
0
VIA = GND to 3.6V
VIB = GND to 3.6V
G, Dir = GND to
3.6V
± 1.0
± 10
µA
1.95
1.95
2.7
2.7
1.95
1.95
3.6
2.7
3.6
3.6
3.6
2.7
2
20
µA
0.75
mA
VIA =VCCA or GND
VIB =VCCB or GND
V
VIA =VCCA - 0.6V
VIB =VCCB or GND
(*) VCC range = 3.3±0.3; 2.5±0.2V; 1.8±0.15V
5/15
74VCX1632245
DC SPECIFICATION FOR VCCB
Test Condition
Symbol
VIHB
VILB
VOHB
VOLB
Parameter
High Level Input
Voltage (Bn, Dir,
G)
Low Level Input
Voltage (Bn, Dir,
G)
High Level
Output Voltage
Low Level
Output Voltage
1.8
Typ.
Max.
Min.
0.65VCCB
0.65VCCB
3.3
0.65VCCB
0.65VCCB
1.6
Unit
Max.
V
2.5
3.3
1.8
2.5
0.35VCCB
0.35VCCB
1.8
3.3
0.35VCCB
0.35VCCB
2.5
3.3
0.7
0.7
2.3
3.0
IO=-100µA
1.6
2.1
V
2.1
2.3
3.0
IO=-18mA
1.7
1.7
1.65
3.0
IO=-6mA
1.25
1.25
1.65
2.3
IO=-6mA
1.25
1.25
V
2.3
3.0
IO=100µA
0.2
0.2
2.3
3.0
IO=18mA
0.60
0.60
1.65
3.0
IO=6mA
0.30
0.30
1.65
2.3
IO=6mA
0.30
0.30
2.7
3.6
VI = VCC or GND
± 0.5
±5
µA
2.7
3.6
VIA = VIHA or VILA
VIB = GND or 2.7V
G = VCCB
± 1.0
± 10
µA
VIA =VCCA or GND
VIB =VCCB or GND
Dir or G=VCCB or
GND
2
20
µA
0.75
mA
IOZB
ICCtB
Quiescent
Supply Current
1.95
1.95
2.7
3.6
2.7
3.6
∆ICCtB
Maximum
Quiescent
Supply Current /
Input (Bn, DIR,
G)
2.7
1.95
1.95
3.6
3.6
2.7
(*) VCC range = 3.3±0.3; 2.5±0.2V; 1.8±0.15V
6/15
Min.
-40 to 85 °C
2.5
Input Leakage
Current
High Impedance
Output Leakage
Current
IIB
TA = 25 °C
VCCB VCCA
(V)
(V)
(*)
(*)
1.8
Value
VIB =VCCB - 0.6V
VIA =VCCA or GND
V
74VCX1632245
DYNAMIC SWITCHING CHARACTERISTICS
Test Condition
Symbol
VOLPA
VOLPB
VOLVA
VOLVB
VOHVA
VOHVB
Parameter
Dynamic Low Level
Quiet An Output
Dynamic Low Level
Quiet Bn Output
Dynamic Low Level
Quiet An Output
Dynamic Low Level
Quiet Bn Output
Dynamic Low Level
Quiet An Output
Dynamic Low Level
Quiet Bn Output
VCCB
(V)
VCCA
(V)
1.8
1.8
2.5
1.8
1.8
2.5
1.8
1.8
2.5
1.8
1.8
2.5
1.8
1.8
2.5
1.8
1.8
2.5
2.5
3.3
3.3
2.5
3.3
3.3
2.5
3.3
3.3
2.5
3.3
3.3
2.5
3.3
3.3
2.5
3.3
3.3
Value
TA = 25 °C
Min.
CL =30pF
VIL =0V VIH =VCC
CL =30pF
VIL =0V VIH =VCC
CL =30pF
VIL =0V VIH =VCC
CL =30pF
VIL =0V VIH =VCC
CL =30pF
VIL =0V VIH =VCC
CL =30pF
VIL =0V VIH =VCC
Typ.
0.25
0.35
0.35
0.25
0.25
0.6
-0.25
-0.35
-0.35
-0.25
-0.25
-0.6
2.1
2.6
2.6
1.7
1.7
2.0
Max.
-40 to 85 °C
Min.
Unit
Max.
V
V
V
V
V
V
7/15
74VCX1632245
AC ELECTRICAL CHARACTERISTICS
Test Condition
Symbol
tPLH tPHL
tPLH tPHL
tPZL tPZH
tPZL tPZH
tPLZ tPHZ
tPLZ tPHZ
tOSLH
tOSHL
Parameter
Value
-40 to 85 °C
VCCA
(V)
VCCB
(V)
Propagation Delay Time 1.8 ± 0.15
An to Bn
1.8 ± 0.15
2.5 ± 0.2
Propagation Delay Time 1.8 ± 0.15
Bn to An
1.8 ± 0.15
2.5 ± 0.2
1.8 ± 0.15
Output Enable Time
G to An
1.8 ± 0.15
2.5 ± 0.2
1.8 ± 0.15
Output Enable Time
G to Bn
1.8 ± 0.15
2.5 ± 0.2
1.8 ± 0.15
Output Disable Time
G to An
1.8 ± 0.15
2.5 ± 0.2
1.8 ± 0.15
Output Disable Time
G to Bn
1.8 ± 0.15
2.5 ± 0.2
Output To Output Skew 1.8 ± 0.15
Time (note1, 2)
1.8 ± 0.15
2.5 ± 0.2
2.5 ± 0.2
3.3 ± 0.3
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
3.3 ± 0.3
CL = 30 pF
RL = 500 Ω
CL = 30 pF
RL = 500 Ω
CL = 30 pF
RL = 500 Ω
CL = 30 pF
RL = 500 Ω
CL = 30 pF
RL = 500 Ω
CL = 30 pF
RL = 500 Ω
Min.
Max.
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
5.8
6.2
4.4
5.5
5.1
4.0
5.3
5.1
4.0
8.3
8.2
4.6
5.2
5.6
4.8
4.6
4.5
4.4
0.5
0.5
0.75
CL = 30 pF
RL = 500 Ω
Unit
ns
ns
ns
ns
ns
ns
ns
1) Skew is defined as the absolute value of the difference between the actual propagation delay for any two outputs of the same device
switching in the same direction, either HIGH or LOW (tOSLH = | tPLHm - tPLHn|, tOSHL = | tPHLm - tPHLn|
2) Parameter guaranteed by design
CAPACITANCE CHARACTERISTICS
Test Condition
Symbol
Parameter
Value
TA = 25 °C
VCCB VCCA
(V)
(V)
Min.
Typ.
Max.
-40 to 85 °C
Min.
Unit
Max.
CINB
Input Capacitance
open
open
5
pF
CI/O
Input/Output
Capacitance
Power Dissipation
Capacitance
2.5
3.3
6
pF
2.5
1.8
3.3
3.3
28
28
pF
pF
CPD
f=10MHz
1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/16 (per circuit)
8/15
74VCX1632245
TEST CIRCUIT
TEST
SWITCH
tPLH, tPHL
Open
tPZL, tPLZ (VCC = 3.0 to 3.6V)
6V
tPZL, tPLZ (VCC = 2.3 to 2.7V or VCC = 1.65 to 1.95V)
tPZH, tPHZ
2VCC
GND
CL = 30pF or equivalent (includes jig and probe capacitance)
RL = R1 = 500Ω or equivalent
RT = ZOUT of pulse generator (typically 50Ω)
WAVEFORM SYMBOL VALUE
VCC
Symbol
3.0 to 3.6V
2.3 to 2.7V
1.65 to 1.95V
VIH
VCC
VCC
VCC
VM
1.5V
VCC/2
VCC/2
VX
VOL +0.3V
VOL +0.15V
VOL +0.15V
VY
VOL -0.3V
VOL -0.15V
VOL -0.15V
9/15
74VCX1632245
WAVEFORM 1: PROPAGATION DELAY (f=1MHz; 50% duty cycle)
WAVEFORM 2: OUTPUT ENABLE AND DISABLE TIME (f=1MHz; 50% duty cycle)
10/15
74VCX1632245
TSSOP48 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
A
MIN.
TYP.
1.2
A1
0.05
0.047
0.15
A2
MAX.
0.002
0.006
0.9
0.035
b
0.17
0.27
0.0067
0.011
c
0.09
0.20
0.0035
0.0079
D
12.4
12.6
0.488
0.496
E
8.1 BSC
E1
6.0
0.318 BSC
6.2
e
0.236
0.5 BSC
0.244
0.0197 BSC
K
0˚
8˚
0˚
8˚
L
0.50
0.75
0.020
0.030
A
A2
A1
b
K
e
L
E
c
D
E1
PIN 1 IDENTIFICATION
1
7065588C
11/15
74VCX1632245
TFBGA54 MECHANICAL DATA
mm.
mils
DIM.
MIN.
TYP
A
MIN.
TYP.
1.2
A1
0.25
A2
0.78
B
0.35
D
7.9
D1
E
MAX.
47.2
9.8
0.4
0.86
30.7
0.45
13.7
8.1
311.0
6.4
5.4
MAX.
5.5
33.8
15.7
17.7
318.9
252.0
5.6
212.6
216.5
E1
4
157.5
e
0.8
31.5
SE
0.4
15.7
220.5
7390143/C
12/15
74VCX1632245
µTFBGA42 MECHANICAL DATA
mm.
mils
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
3.90
4.10
153.5
161.4
B
3.40
3.60
133.9
141.7
C
1.07
D
0.3
11.8
E
0.5
19.7
F
0.78
1.16
0.86
42.1
30.7
45.6
33.9
13/15
74VCX1632245
Tape & Reel TSSOP48 MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
MAX.
MIN.
330
13.2
TYP.
MAX.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
14/15
TYP
0.504
30.4
0.519
1.197
Ao
8.7
8.9
0.343
0.350
Bo
13.1
13.3
0.516
0.524
Ko
1.5
1.7
0.059
0.067
Po
3.9
4.1
0.153
0.161
P
11.9
12.1
0.468
0.476
74VCX1632245
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2003 STMicroelectronics - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
http://www.st.com
15/15