74AC04, 74ACT04 Hex Inverter tm Features General Description ■ ICC reduced by 50% on 74AC only The AC/ACT04 contains six inverters. ■ Outputs source/sink 24mA ■ ACT04 has TTL-compatible inputs Ordering Information Order Number Package Number Package Description 74AC04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74AC04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74AC04PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74ACT04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74ACT04MTC 74ACT04PC MTC14 N14A 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in Tape and Reel.) All packages are lead free per JEDEC: J-STD-020B standard. Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names Description An Inputs On Outputs FACT™ is a trademark of Fairchild Semiconductor Corporation. ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 74AC04, 74ACT04 Hex Inverter September 2007 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC IIK Parameter Rating Supply Voltage –0.5V to +7.0V DC Input Diode Current VI = –0.5V –20mA VI = VCC + 0.5V +20mA VI DC Input Voltage IOK DC Output Diode Current –0.5V to VCC + 0.5V VO = –0.5V –20mA VO = VCC + 0.5V +20mA VO DC Output Voltage –0.5V to VCC + 0.5V IO DC Output Source or Sink Current ±50mA ICC or IGND DC VCC or Ground Current per Output Pin TSTG Storage Temperature TJ Junction Temperature ±50mA –65°C to +150°C PDIP 140°C Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage AC 2.0V to 6.0V ACT 4.5V to 5.5V VI Input Voltage VO Output Voltage TA Operating Temperature ∆V / ∆t Rating 0V to VCC 0V to VCC –40°C to +85°C 125mV/ns Minimum Input Edge Rate, AC Devices: VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V ∆V / ∆t Minimum Input Edge Rate, ACT Devices: 125mV/ns VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 2 74AC04, 74ACT04 Hex Inverter Absolute Maximum Ratings TA = +25°C Symbol VIH Parameter VCC (V) Minimum HIGH Level Input Voltage 3.0 Maximum LOW Level 3.0 Input Voltage 4.5 Minimum HIGH Level 3.0 Output Voltage Conditions VOUT = 0.1V or VCC – 0.1V 2.1 2.1 2.25 3.15 3.15 2.75 3.85 3.85 1.5 0.9 0.9 2.25 1.35 1.35 2.75 1.65 1.65 2.99 2.9 2.9 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 4.5 VOUT = 0.1V or VCC – 0.1V 5.5 VOH Guaranteed Limits 1.5 5.5 VIL Typ. TA = –40°C to +85°C IOUT = –50µA Units V V V VIN = VIL or VIH: VOL Maximum LOW Level Output Voltage 3.0 IOH = –12mA 2.56 2.46 4.5 IOH = –24mA 3.86 3.76 5.5 IOH = 4.86 4.76 3.0 IOUT = 50µA 0.002 0.1 0.1 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 –24mA(1) V VIN = VIL or VIH IIN (3) IOLD IOHD ICC (3) Maximum Input Leakage Current Minimum Dynamic Output Current(2) Maximum Quiescent Supply Current 3.0 IOL= 12mA 0.36 0.44 4.5 IOL = 24mA 0.36 0.44 5.5 IOL = 24mA(1) 0.36 0.44 5.5 VI = VCC, GND ±0.1 ±1.0 µA 5.5 VOLD = 1.65V Max. 75 mA 5.5 VOHD = 3.85V Min. –75 mA 5.5 VIN = VCC or GND 20.0 µA 2.0 Notes: 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0ms, one output loaded at a time. 3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 3 74AC04, 74ACT04 Hex Inverter DC Electrical Characteristics for AC Symbol VIH VIL VOH Parameter VCC (V) Conditions Typ. TA = –40°C to +85°C Guaranteed Limits VOUT = 0.1V or VCC – 0.1V 1.5 2.0 2.0 1.5 2.0 2.0 VOUT = 0.1V or VCC – 0.1V 1.5 0.8 0.8 5.5 1.5 0.8 0.8 4.5 IOUT = –50µA 4.49 4.4 4.4 5.49 5.4 5.4 Minimum HIGH Level Input Voltage 5.5 Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage TA = +25°C 4.5 4.5 5.5 Units V V V VIN = VIL or VIH: VOL Maximum LOW Level Output Voltage 4.5 IOH = –24mA 3.86 3.76 5.5 IOH = 4.86 4.76 4.5 IOUT = 50µA 0.001 0.1 0.1 0.001 0.1 0.1 –24mA(4) 5.5 V VIN = VIL or VIH: 4.5 IOL= 24mA 0.36 0.44 5.5 IOL= 0.36 0.44 Maximum Input Leakage Current 5.5 VI = VCC, GND ±0.1 ±1.0 µA ICCT Maximum ICC/Input 5.5 VI = VCC – 2.1V 1.5 mA IOLD Minimum Dynamic Output Current(5) 5.5 VOLD = 1.65V Max. 75 mA 5.5 VOHD = 3.85V Min. –75 mA Maximum Quiescent Supply Current 5.5 VIN = VCC or GND 40.0 µA IIN IOHD ICC 24mA(4) 0.6 4.0 Notes: 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0ms, one output loaded at a time. ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 4 74AC04, 74ACT04 Hex Inverter DC Electrical Characteristics for ACT TA = +25°C, CL = 50pF Symbol tPLH tPHL Parameter TA = –40°C to +85°C, CL = 50pF VCC (V)(6) Min. Typ. Max. Min. Max. Units 3.3 1.5 4.5 9.0 1.0 10.0 ns 5.0 1.5 4.0 7.0 1.0 7.5 Propagation Delay Propagation Delay 3.3 1.5 4.5 8.5 1.0 9.5 5.0 1.5 3.5 6.5 1.0 7.0 ns Note: 6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V. AC Electrical Characteristics for ACT TA = +25°C, CL = 50pF Symbol Parameter TA = –40°C to +85°C, CL = 50pF VCC (V)(7) Min. Typ. Max. Min. Max. Units tPLH Propagation Delay 5.0 1.0 6.0 8.5 1.0 9.0 ns tPHL Propagation Delay 5.0 1.0 5.5 8.0 1.0 8.5 ns Note: 7. Voltage range 5.0 is 5.0V ± 0.5V. Capacitance Symbol Parameter Conditions Typ. Units CIN Input Capacitance VCC = OPEN 4.5 pF VCC Power Dissipation Capacitance VCC = 5.0V 30.0 pF ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 5 74AC04, 74ACT04 Hex Inverter AC Electrical Characteristics for AC 74AC04, 74ACT04 Hex Inverter Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 6 74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 7 74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 8 74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted. Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 9 ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® PDP-SPM™ Power220® SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Definition Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I31 ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 10 74AC04, 74ACT04 Hex Inverter TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.