KSA940 KSA940 Vertical Deflection Output Power Amplifier • Complement to KSC2073 TO-220 1 1.Base 2.Collector 3.Emitter PNP Epitaxial Silicon Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO Collector-Base Voltage Parameter VCEO Collector-Emitter Voltage VEBO Emitter-Base Voltage IC IB PC Collector Dissipation (Ta=25°C) Ratings - 150 Units V - 150 V -5 V Collector Current - 1.5 A Base Current - 0.5 A 1.5 W PC Collector Dissipation (TC=25°C) 25 W TJ Junction Temperature 150 °C TSTG Storage Temperature - 55 ~ 150 °C Electrical Characteristics TC=25°C unless otherwise noted Symbol ICBO Parameter Collector Cut-off Current Test Condition VCB = - 120V, IE = 0 IEBO Emitter Cut-off Current VEB = - 5V, IC = 0 hFE DC Current Gain VCE = - 10V, IC = - 500mA Min. Typ. Max. - 10 Units µA 40 75 - 10 140 µA - 1.5 V - 0.65 - 0.75 - 0.85 V VCE (sat) Collector-Emitter Saturation Voltage IC = - 500mA, IB = - 50mA VBE(on) Base-Emitter ON Voltage VCE = - 10V, IC = - 500mA fT Current Gain Bandwidth Product VCE = - 10V, IC = - 500mA 4 MHz Cob Output Capacitance VCB = - 10V, IE = 0 f = 1MHz 55 pF ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSA940 Typical Characteristics VCE = -10V -5 0m A = -1 5 -1 0m 00 A m A IB = -30mA -1.2 IB = -20mA IB = -15mA -0.8 IB = -10mA IB = -5mA -0.4 hFE, DC CURRENT GAIN = IB = -40mA IB IB = -1.6 1000 IB IC[A], COLLECTOR CURRENT -2.0 100 10 IB = 0mA -0.0 -4 -8 -12 -16 1 -0.01 -20 VCE[V], COLLECTOR-EMITTER VOLTAGE -1 IC[A], COLLECTOR CURRENT Figure 1. Static Characteristic Figure 2. DC current Gain -10 -10 IC = 10 IB s -1 D C =2 TC 5℃ -0.1 IC MAX. (DC) m 10 -1 s s 1 IC[A], COLLECTOR CURRENT IC MAX. (Pulse) 0m 10 VCE(sat)[V], SATURATION VOLTAGE -0.1 -0.1 -0.01 -0.01 -0.01 -0.1 -1 -1 -10 -100 VCE[V], COLLECTOR-EMITTER VOLTAGE IC[A], COLLECTOR CURRENT Figure 3. Collector-Emitter Saturation Voltage VCEOMAX. -0 Figure 4. Safe Operating Area 32 PC[W], POWER DISSIPATION 28 24 20 16 12 8 4 0 0 50 100 150 o TC[ C], CASE TEMPERATURE Figure 5. Power Derating ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSA940 Package Demensions TO-220 4.50 ±0.20 2.80 ±0.10 (3.00) +0.10 1.30 –0.05 18.95MAX. (3.70) ø3.60 ±0.10 15.90 ±0.20 1.30 ±0.10 (8.70) (1.46) 9.20 ±0.20 (1.70) 9.90 ±0.20 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 10.08 ±0.30 (1.00) 13.08 ±0.20 ) (45° 1.27 ±0.10 +0.10 0.50 –0.05 2.40 ±0.20 2.54TYP [2.54 ±0.20] 10.00 ±0.20 Dimensions in Millimeters ©2000 Fairchild Semiconductor International Rev. A, February 2000 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOS™ FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench® QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2000 Fairchild Semiconductor International Rev. E