HCC/HCF4000B-4001B HCC/HCF4002B-4025B NOR GATE 4000B–DUAL 3 INPUT PLUS INVERTER 4001B–QUAD 2 INPUT 4002B-DUAL 4 INPUT 4025B TRIPLE 3 INPUT . .. . .. .. PROPAGATION DELAY TIME = 60 ns (typ.) AT CL = 50 pF, VDD = 10 V BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED TO 20 V FOR HCC DEVICE 5V, 10V AND 15V PARAMETRIC RATINGS INPUT CURRENT OF 100nA AT 18V AND 25 oC FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD N. 13A, ” STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES ” micropackage. The HCC/HCF4000B, HCC/HCF4001B, HCC/HCF 4002B and HCC/HCF4025B nor gate provide the system designer with direct implementation of the nor function and supplement the existing family of COS/MOS gates. All inputs and outputs are buffered. EY (Plastic Package) F (Ceramic Package) M1 (Micro Package) C1 (Chip Carrier) DESCRIPTION The HCC4000B, HCC4001B, HCC4002B and HCC4025B (extended temperature range) and HCF4000B, HCF4001B, HCF4002B and HCF4025B (intermediate temperature range) are monolithic integrated circuit, available in 14-lead dual in line plastic or ceramic package and plastic ORDER CODES : HCCXXXXBF HCFXXXXBM1 HCFXXXXBEY HCFXXXXBC1 PIN CONNECTIONS 4000B September 1988 4001B 4002B 4025B 1/13 HCC/HCF4000B-4001B-4002B-4025B ABSOLUTE MAXIMUM RATING Symbol VDD * Parameter Value Unit -0.5 to +20 -0.5 to +18 -0.5 to VDD + 0.5 V V V Vi Supply Voltage: HCC Types HCF Types Input Voltage II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package Temperature Range 200 mW 100 mW Ptot Top Operating Temperature: HCC Types HCF Types -55 to +125 -40 to +85 o Tstg Storage Temperature -65 to +150 o o C C C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress ratingonly and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol VDD VI Top 2/13 Parameter Supply Voltage: HCC Types HCF Types Input Voltage Operating Temperature: HCC Types HCF Types Value 3 to 18 3 to 15 0 to VDD -55 to +125 -40 to +85 Unit V V V o o C C HCC/ HCF4000B-4001B-4002B-4025B SCHEMATIC AND LOGIC DIAGRAMS 4000B INVERTERAND 1 OF 2 GATES (NUMBERS IN PARANTHESES ARE THERMINAL FOR SECOND GATE) 4001B 1 OF 4 GATES (NUMBERS IN PARANTHESES ARE THERMINAL FOR OTHER GATE) 3/13 HCC/HCF4000B-4001B-4002B-4025B SCHEMATIC AND LOGIC DIAGRAMS (continued) 4002B 1 OF2 GATES (NUMBERS IN PARANTHESES ARE THERMINAL FOR SECOND GATE) 4025B INVERTERAND 1 OF 3 GATES (NUMBERS IN PARANTHESES ARE THERMINAL FOR OTHER GATES) 4/13 HCC/ HCF4000B-4001B-4002B-4025B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Symbol Parameter IL Quiescent Current VI (V) 0/5 0/10 0/15 0/20 0/5 HCF 0/10 Types 0/15 Output High 0/5 Voltage 0/10 0/15 Output Low 5/0 Voltage 10/0 15/0 Input High Voltage V OH VOL VIH V IL HCC Types Input Low Voltage IOH Output Drive Current HCC Types HCF Types IOL Output Sink Current HCC Types HCF Types IIH, IIL Input Leakage Current HCC Types HCF Types Input Capacitance CI o Test Conditios VO |IO| VDD (V) (µA) (V) 0/5 0/5 0/10 0/15 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0/5 0/10 0/15 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 0.4 0.5 1.5 < < < < < < < < < < < < 0/18 1 1 1 1 1 1 1 1 1 1 1 1 Value 25 oC Min. Typ. Max. 0.01 0.25 0.01 0.5 0.01 1 0.02 5 0.01 1 0.01 2 0.01 4 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 -1.6 -3.2 -0.51 -1 -1.3 -2.6 -3.4 -6.8 -1.36 -3.2 -0.44 -1 -1.1 -2.6 -3.0 -6.8 0.51 1 1.3 2.6 3.4 6.8 0.44 1 1.1 2.6 3.0 6.8 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 5 10 15 5 10 15 5 10 15 TLOW * Min. Max. 0.25 0.5 1 5 1 2 4 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 -2 -0.64 -1.6 -4.2 -1.53 -0.52 -1.3 -3.6 0.64 1.6 4.2 0.52 1.3 3.6 THIGH * Min. Max. 7.5 15 30 150 7.5 15 30 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 -1.15 -0.36 -0.9 -2.4 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 0.36 0.9 2.4 18 ±0.1 ±10-5 ±0.1 ±1 15 ±0.3 ±10-5 ±0.3 ±1 5 7.5 Any Input 0/15 Any Input Unit µA V V V V mA mA µA pF o * TLOW = -55 C for HCC device: -40 C for HCF device. * THIGH = +125 oC for HCC device: +85 oC for HCF device. The Noise Margin for both ”1” and ”0” level is: 1V min. with VDD = 5 V, 2 V min. with VDD = 10 V, 2.5 V min. with VDD = 15 V 5/13 HCC/HCF4000B-4001B-4002B-4025B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25 o C, C L = 50 pF, RL = 200 KΩ, o typical temperature coefficent for all VDD values is 03 %/ C, all input rise and fall times= 20 ns) Symbol Parameter tPHL tPLH Propagation Delay Time tTHL tTLH Transition Time Test Conditions VDD (V) 5 10 5 5 10 15 Min. Value Typ. 125 60 45 100 50 40 Max. 250 120 90 200 100 80 Unit ns ns Typical Output Low (sink) Current Characteristics Minimum Output Low (sink) Current Characteristics Typical Output High (source) Current Characteristics Minimum Output High (sorce) Current Characteristics 6/13 HCC/ HCF4000B-4001B-4002B-4025B Typical Transition Time vs Load Capacitance Typical Propagation Delay Time vs Load Capacitance Typical Voltage Transfer Characteristics as a Function of Temperature Typical Power Dissipation Per Gate vs Frequency 7/13 HCC/HCF4000B-4001B-4002B-4025B TEST CIRCUITS Quiescent Device Current. Input Leakage Current. 8/13 Noise Immunity. HCC/ HCF4000B-4001B-4002B-4025B Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 9/13 HCC/HCF4000B-4001B-4002B-4025B Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053C 10/13 HCC/ HCF4000B-4001B-4002B-4025B SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) P013G 11/13 HCC/HCF4000B-4001B-4002B-4025B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 12/13 HCC/ HCF4000B-4001B-4002B-4025B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 13/13