HCC/HCF4078B 8-INPUT NOR/OR GATE . . .. .. MEDIUM-SPEED OPERATION tPHL, tPLH =75ns (TYP.) AT VDD = 10V QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE 5V, 10V, AND 15V PARAMETRIC RATINGS INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD No. 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) M1 (Micro Package) F (Ceramic Frit Seal Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC4078BF HCF4078BM1 HCF4078BEY HCF4078BC1 PIN CONNECTIONS DESCRIPTION The HCC4078B (extended temperature range) and HCF4078B (intermediate temperature range) are monolithic integrated circuit, available in 14-lead dual in-line plastic or ceramic package, plastic micropackage. The HCC/HCF4078B NOR/OR Gate provides the system designer with direct implementation of the positive-logic-8-input NOR and OR function and supplements the existing family of COS/MOS gates. June 1989 1/11 HCC/HCF4078B ABSOLUTE MAXIMUM RATINGS Symbol V DD* Parameter Supply Voltage : HC C Types H C F Types Value Unit – 0.5 to + 20 – 0.5 to + 18 V V Vi Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range 200 mW 100 mW Pt ot Top Operating Temperature : HCC Types H CF Types – 55 to + 125 – 40 to + 85 °C °C Tstg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top 2/11 Parameter Supply Voltage : HC C Types H CF Types Input Voltage Operating Temperature : HCC Types H CF Types Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C HCC/HCF4078B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL V OH V OL V IH V IL I OH Parameter Quiescent Current VI (V) 0/ 5 5 0.25 0.01 0.25 7.5 HCC Types 0/15 10 0.5 0.01 0.5 15 15 1 0.01 1 30 0/20 20 5 0.02 5 150 0/ 5 HCF 0/10 Types 0/15 5 1 0.01 1 7.5 10 2 0.01 2 15 15 4 0.01 4 30 Output Low Voltage 0/ 5 <1 5 4.95 4.95 4.95 0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 5/0 <1 5 0.05 0.05 0.05 10/0 <1 10 0.05 0.05 0.05 15/0 <1 15 0.05 0.05 0.05 Input High Voltage Input Low Voltage I IH , I IL CI Output Sink Current Input Leakage Current 14.95 <1 5 3.5 3.5 3.5 1/9 <1 10 7 7 7 1.5/13.5 < 1 15 11 11 11 <1 5 1.5 1.5 1.5 <1 10 3 3 3 13.5/1.5 < 1 15 HCC 0/ 5 Types 0/10 0/15 4 –2 4.6 5 9.5 10 13.5 0/ 5 0/ 5 HCF Types 0/10 4 – 1.15 – 0.64 – 0.51 – 1 – 0.36 – 1.6 – 1.3 – 2.6 – 0.9 15 – 4.2 – 3.4 – 6.8 – 2.4 2.5 5 – 1.53 – 1.36 – 3.2 – 1.1 4.6 5 – 0.52 – 0.44 – 1 – 0.36 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4 0.4 5 0.64 0.51 1 0.36 0.5 10 1.6 1.3 2.6 0.9 1.5 15 4.2 3.4 6.8 2.4 0/ 5 0.4 5 0.52 0.44 1 0.36 HCF 0/10 Types 0/15 0.5 10 1.3 1.1 2.6 0.9 1.5 15 3.6 3.0 6.8 2.4 Input Capacitance mA mA 18 ± 0.1 ±10– 5 ± 0.1 ± 1 15 ± 0.3 ±10 ± 1 Any Input HCF Types 0/15 Any Input 5 –5 V 4 – 1.6 – 3.2 0/ 5 HCC 0/10 Types 0/15 HCC 0/18 Types V V 9/1 5 µA V 4.5/0.5 2.5 Unit 14.95 0.5/4.5 0/ 5 0/15 I OL |I O | V D D T L o w* 25 °C T H ig h* (µA) (V) Min. Max. Min. Typ. Max. Min. Max. 0/10 Output High Voltage Output Drive Current VO (V) Value ± 0.3 7.5 µA pF * TLo w = – 55°C for HCC device : – 40°C for HCF device. * THigh = + 125°C for HCC device : + 85°C for HCF device. The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5 V min. with VDD = 15V. 3/11 HCC/HCF4078B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200kΩ, typical temperature coefficient for all V DD values is 0.3%/°C, all input rise and fall time = 20ns) Symbol Parameter t P HL , t P L H Propagation Delay Time t THL , t T L H Transition Time Test Conditions Value V D D (V) Min. Typ. Max. 5 150 300 10 75 150 15 55 110 5 100 200 10 50 100 15 40 80 Unit ns ns Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. 4/11 HCC/HCF4078B Typical Voltage Transfer Characteristics (NOR output). Typical Transition Time vs. Load Capacitance. Typical Propagation Delay Time vs. Load Capacitance. Typical Power Dissipation vs. Frequency. 5/11 HCC/HCF4078B TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Current. Dynamic Power Dissipation. 6/11 HCC/HCF4078B Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 7/11 HCC/HCF4078B Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053C 8/11 HCC/HCF4078B SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) P013G 9/11 HCC/HCF4078B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 10/11 HCC/HCF4078B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 11/11