HCC/HCF4019B QUAD AND/OR SELECT GATE . . . .. .. MEDIUM SPEED OPERATION : tPHL = tPLH = 60ns (typ.) AT C L = 50pF, VDD = 10V STANDARDIZED, SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE 5V, 10V, AND 15V PARAMETRIC RATINGS INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD No. 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) M1 (Micro Package ) F (Ceramic Frit Seal Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC4019BF HCF4019BM1 HCF4019BEY HCF4019BC1 PIN CONNECTIONS DESCRIPTION The HCC4019B (extended temperature range) and HCF4019B (intermediate temperature range) are monolithic integrated circuit, available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4019B types are comprised of four AND/OR select gate configurations, each consisting of two 2-input AND gates driving a single 2-input OR gate. Selection is accomplished by control bits Ka and Kb. In addition to selection of either channel A or channel B information, the control bits can be applied simultaneously to accomplish the logical A+B function. June 1989 1/13 HCC/HCF4019B ABSOLUTE MAXIMUM RATINGS Symbol V DD * Parameter Supply Voltage : HC C Types H CF Types Value Unit – 0.5 to + 20 – 0.5 to + 18 V V Vi Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range 200 mW 100 mW Pto t T op Operating Temperature : HCC Types H CF Types – 55 to + 125 – 40 to + 85 °C °C T stg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top 2/13 Parameter Supply Voltage : HCC Types HC F Types Input Voltage Operating Temperature : HCC Types H CF Types Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C HCC/HCF4019B LOGIC DIAGRAMS 4019B TRUTH TABLE Ka Kb An Bn DN 1 1 X X 0 X X 1 1 0 1 0 X X X X X 1 0 X 1 0 1 0 0 X = Don’t care. 3/13 HCC/HCF4019B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Symbol IL Parameter Quiescent Current HCC Types HCF Types V OH V OL V IH V IL I OH Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Output Drive Current HCC Types HCF Types I OL Output Sink Current HCC Types HCF Types I IH , I IL CI Input Leakage Current Test Conditions VO |I O | V D D T L o w* (V) (µA) (V) Min. Max. 0/ 5 5 1 0/10 10 2 0/15 15 4 0/20 20 20 0/ 5 5 4 0/10 10 8 0/15 15 16 0/ 5 <1 5 4.95 0/10 <1 10 9.95 0/15 <1 15 14.95 5/0 <1 5 0.05 10/0 <1 10 0.05 15/0 <1 15 0.05 0.5/4.5 < 1 5 3.5 1/9 <1 10 7 1.5/13.5 < 1 15 11 4.5/0.5 < 1 5 1.5 9/1 <1 10 3 13.5/1.5 < 1 15 4 0/ 5 2.5 5 – 2 0/ 5 4.6 5 – 0.64 0/10 9.5 10 – 1.6 0/15 13.5 15 – 4.2 0/ 5 2.5 5 – 1.53 0/ 5 4.6 5 – 0.52 0/10 9.5 10 – 1.3 0/15 13.5 15 – 3.6 0/ 5 0.4 5 0.64 0/10 0.5 10 1.6 0/15 1.5 15 4.2 0/ 5 0.4 5 0.52 0/10 0.5 10 1.3 0/15 1.5 15 3.6 0/18 18 ± 0.1 VI (V) HCC Types HCF 0/15 Types Input All A and B Capacitance Inputs Ka and Kb Inputs Any Input 15 ± 0.3 Value 25 °C Min. Typ. Max. 0.02 1 0.02 2 0.02 4 0.04 20 0.02 4 0.02 8 0.02 16 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 – 1.6 – 3.2 – 0.51 – 1 – 1.3 – 2.6 – 3.4 – 6.8 – 1.36 – 3.2 – 0.44 – 1 – 1.1 – 2.6 – 3.0 – 6.8 0.51 1 1.3 2.6 3.4 6.8 0.44 1 1.1 2.6 3.0 6.8 ±10 – 5 ± 0.1 T Hi g h * Min. Max. 30 60 120 600 30 60 120 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 – 1.15 – 0.36 – 0.9 – 2.4 – 1.1 – 0.36 – 0.9 – 2.4 0.36 0.9 2.4 0.36 0.9 2.4 ± 1 ±10 – 5 ± 0.3 µA V V V V mA mA µA 5 7.5 pF 10 15 pF * TLo w= – 55°C for HCC device : – 40°C for HCF device. * THigh= + 125°C for HCC device : + 85°C for HCF device. The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5 V min. with VDD = 15V. 4/13 ± 1 Unit HCC/HCF4019B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25 °C, C L = 50 pF, R L = 200 kΩ, typical temperature coefficient for all V DD values is 0.3 %/°C, all input rise and fall times = 20 ns) Symbol Parameter Test Conditions t P L H , t P HL Propagation Delay Time t TL H, t T HL Transition Time Value V D D (V) Min. Typ. Max. 5 150 300 10 60 120 15 50 100 5 100 200 10 50 100 15 40 80 Unit ns ns Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. 5/13 HCC/HCF4019B TYPICAL APPLICATIONS AND-OR SELECTED GATING. SHIFT LEFT SHIFT RIGHT REGISTER. 6/13 HCC/HCF4019B TYPICAL APPLICATIONS (continued) TRUE COMPLEMENT SELECTOR. AND-OR EXCLUSIVE-OR SELECTOR. TRUTH TABLE K [ •] K [O+] OUT 0 1 0 1 0 0 1 1 0 A–B A⊕B A+B 7/13 HCC/HCF4019B TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Leakage Current. Dynamic Power Dissipation. 8/13 HCC/HCF4019B Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 9/13 HCC/HCF4019B Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 10/13 HCC/HCF4019B SO16 (Narrow) MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 E 5.8 10 0.385 6.2 0.228 0.393 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8° (max.) P013H 11/13 HCC/HCF4019B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 12/13 HCC/HCF4019B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 13/13