HCC/HCF40104B HCC/HCF40194B 4-BIT BIDIRECTIONAL UNIVERSAL SHIFT REGISTER . .. .. . . .. .. MEDIUM-SPEED OPERATION : fCL = 9MHz (typ.) @ VDD = 10V FULLY STATIC OPERATION SYNCHRONOUS PARALLEL OR SERIAL OPERATION THREE-STATE OUTPUTS (HCC/HCF40104B) ASYNCHRONOUS MASTER RESET (HCC/HCF40194B) STANDARDIZED, SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT AT 20V FOR HCC DEVICE 5V, 10V, AND 15V PARAMETRIC RATINGS INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD N° 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) C1 (Plastic Chip Carrier ) ORDER CODES : HCC401XXBF HCF401XXBEY HCF401XXBC1 PIN CONNECTIONS DESCRIPTION The HCC40104B, HCC40194B, (extended temperature range) and the HCC40104B, HCF40194B (intermediate temperature range) are monolithic integrated circuits, available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF 40104B is a universal shift register featuring parallel inputs, parallel outputs, SHIFT RIGHT and SHIFT LEFT serial inputs, and a high-impedance third output state allowing the device to be used in bus-organized systems. In the parallel-load mode (S0 and S1 are high), data is loaded into the associated flip-flop and appears at the output after the positive transition of the CLOCK input. During loading, serial data flow is inhibited. Shift-right and shift-left are accomplished synchronously on the positive clock edge with serial data entered at the SHIFT RIGHT and SHIFT LEFT serial inputs, respectively. Clearing the register is accomplished by setting both mode controls low and clocking the register. When the output enable input is low, all outputs assume the high impedance state. The HCC/HCF40194B is a universal shift register featuring parallel inputs, parallel outputs SHIFT RIGHT and SHIFT LEFT serial inputs, and a direct overriding clear input. In the parallel-load mode (S0 and S1 are high), data is loaded into the associated flip-flop and June 1989 F (Ceramic Package) 40104B 40194B 1/12 HCC/HCF40104B/40194B appears at the output after the positive transition of the CLOCK input. During loading, serial data flow is inhibited. Shift right and shift left are accomplished synchronously on the positive clock edge with data entered at the SHIFT RIGHT and SHIFT LEFT serial inputs, respectively. Clocking of the register is inhibited when both mode control inputs are low. When low, the RESET input resets all stages and forces all outputs low. The HCC/HCF40194B is similar to industry types 340194 and MC40194. FUNCTIONAL DIAGRAMS 40194B 40104B ABSOLUTE MAXIMUM RATINGS Symbol V DD * Parameter Supply Voltage : H CC Types H C F Types Value Unit – 0.5 to + 20 – 0.5 to + 18 V V Vi Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range 200 mW 100 mW Pt o t To p Operating Temperature : H CC Types H C F Types – 55 to + 125 – 40 to + 85 °C °C T stg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltages values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI To p 2/12 Parameter Supply Voltage : HC C Types H C F Types Input Voltage Operating Temperature : H CC Types H C F Types Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C HCC/HCF40104B/40194B LOGIC DIAGRAMS 40104B 3/12 HCC/HCF40104B/40194B LOGIC DIAGRAMS 40194B 4/12 HCC/HCF40104B/40194B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL V OH V OL Parameter Quiescent Current VI (V) VO (V) V IL I OH 0/ 5 5 5 0.04 5 150 HCC Types 0/15 10 10 0.04 10 300 15 20 0.04 20 600 0/20 20 100 0.08 100 3000 0/ 5 HCF 0/10 Types 0/15 5 20 0.04 20 150 10 40 0.04 40 300 15 80 0.04 80 600 Output High Voltage Output Low Voltage 0/ 5 <1 5 4.95 4.95 4.95 0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.95 5/0 <1 5 0.05 0.05 0.05 10/0 <1 10 0.05 0.05 0.05 I OL I IH , I IL CI Input High Voltage Input Low Voltage Output Drive Current Output Sink Current Input Leakage Current |I O | V D D T L o w* 25 °C T Hi g h * (µA) (V) Min. Max. Min. Typ. Max. Min. Max. 0/10 15/0 V IH Value <1 15 0.5/4.5 <1 5 1/9 0.05 3.5 0.05 3.5 <1 10 7 7 7 1.5/13.5 < 1 15 11 11 11 4.5/0.5 <1 5 1.5 1.5 1.5 9/1 <1 10 3 3 3 13.5/1.5 < 1 15 4 4 4 2.5 5 – 2 – 1.6 – 3.2 – 1.15 HCC Types 0/10 4.6 5 – 0.64 – 0.51 – 1 – 0.36 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9 0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4 0/ 5 2.5 5 – 1.53 – 1.36 – 3.2 – 1.1 0/ 5 HCF Types 0/10 4.6 5 – 0.52 – 0.44 – 1 – 0.36 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9 0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4 0/ 5 0.4 5 0.64 0.51 1 0.36 0.5 10 1.6 1.3 2.6 0.9 1.5 15 4.2 3.4 6.8 2.4 0/ 5 0.4 5 0.52 0.44 1 0.36 HCF 0/10 Types 0/15 0.5 10 1.3 1.1 2.6 0.9 1.5 15 3.6 3.0 6.8 2.4 Any Input V 18 ± 0.1 ±10 – 5 ± 0.1 15 ± 0.3 ±10 V V mA mA ± 1 µA Any Input HCF 0/15 Types Input Capacitance V 0.05 0/ 5 HCC 0/18 Types µA 3.5 0/ 5 HCC 0/10 Types 0/15 Unit 5 –5 ± 0.3 7.5 ±1 pF * TLOW= – 55°C for HCC device : – 40°C for HCF device. * THIGH = + 125°C for HCC device : + 85°C for HCF device. The noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5 min. with VDD = 15V 5/12 HCC/HCF40104B/40194B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200kΩ, typical temperature coefficient for all V DD values is 0.3%/°C, all input rise and fall time = 20ns) Symbol t PL H ,t P HL Parameter Propagation Delay Time Clock to Q t PZ H,t PZ L , 3-state Outputs ■ t PL Z High Impedance t P HZ t T HL , t TL H Transition Time t se t u p Setup Time D0,D3,SR, SL to Clock S0, S1 to Clock th old Hold Time D0,D3,SR, SL to Clock S0, S1 to Clock tW f CL t r, tf tW t PRHL Clock Pulse Width Clock Input Frequency Clock Input Rise or Fall Time Reset Pulse Width* Propagation Delay Reset* ■ For 40104B series only 6/12 * For 40194B series only. Test Conditions Value V D D (V) Min. Typ. Max. 5 220 440 10 100 200 15 70 140 5 80 160 10 35 70 15 25 50 5 45 90 10 25 50 15 20 40 5 100 200 10 50 100 15 40 80 5 80 100 10 35 70 15 20 50 5 200 400 10 110 220 15 65 130 5 – 65 0 10 – 25 0 15 – 15 0 5 – 170 0 10 – 95 0 15 – 55 0 5 90 180 10 40 180 15 25 50 5 3 6 10 6 12 15 8 15 Unit ns ns ns ns ns ns ns ns ns MHz 5 1000 10 100 15 100 5 150 300 10 100 200 15 70 140 5 230 460 10 90 180 15 65 130 µs ns ns HCC/HCF40104B/40194B TRUTH TABLES 40194B 40104B Mode Select O utput Clock ▲ Action S 0 S 1 Enable – 0 0 1 Reset –/ – Shift Right 1 0 1 –/ (Q0 toward Q3) –/ –/ X X Action 0 0 1 No Change –/ – 1 0 1 Shift Right (Q0 toward Q3) – 0 1 1 Shift Left (Q3 toward Q0) – 1 1 1 Parallel Load X X 0 0 1 1 Shift Left (Q3 toward Q0) –/ – 1 1 1 Parallel Load 0 Operations occur as shown above, but outputs assume high impedance –/ X X Reset S 0 S1 – X Mode Select Clock 1=High level 0=Low level Reset X= Don’t care ∆ = Level change Output Low (sink) Current Characteristics. Output High (source) Current Characteristics. Typical Propagation Delay Time vs. Load Capacitance. Typical Transition Time vs. Load Capacitance. 7/12 HCC/HCF40104B/40194B Typical Dynamic Power Dissipation vs. Frequency. TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Leakage Current. Dynamic Power Dissipation. 8/12 HCC/HCF40104B/40194B Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 9/12 HCC/HCF40104B/40194B Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 10/12 HCC/HCF40104B/40194B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 11/12 HCC/HCF40104B/40194B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 12/12